How to Replace Rear Wheel Bearing & Hub Assemblies 2008-2020 Dodge Grand Caravan

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHR00326
This video shows you how to install new rear wheel bearing & hub assemblies from TRQ on your 2008-2020 Dodge Grand Caravan. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan
Tools you will need:
• Pocket Screwdriver
• 16mm Socket 1aau.to/obUj/1AXAA00015
• 18mm Socket 1aau.to/oaxn/1AXAA00043
• 19mm Socket 1aau.to/oaxn/1AXAA00043
• Air Blow Gun
• Trim Tool Set 1aau.to/oaqk/1AXXX00006
• Ratchet 1aau.to/obXc/1AXAA00016
• Socket Extensions 1aau.to/obUj/1AXAA00015
• Torque Wrench 1aau.to/oaZV/1AXAA00044
• Bearing Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/oJW/1AXSS00035
• Copper Anti-Seize
• Gloves 1aau.to/oaKA/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oapb/1AXAA00068
• Jack Stands 1aau.to/oabx/1AXAA00065
• Large Hammer
• Wheel Chocks
• Wire Brush 1aau.to/oww/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@generessler6282]

Thanks! Just finished this job using your instructions, and the patient lives! Very good explanation and images. Saved me $200.

[@earlschultz7880]

thanks so much for the video, good camera shots & verbal teaching. I might be able to try this myself!

[@TRQ]

+@earlschultz7880 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@suggesttwo]

41lb bearings bolts, wheel nuts 100lb, caliper bolts 74lb.

[@john7904]

Good video, clear and to the point. Thanks for the info. Subscribed

[@tmart9084]

Is it possible to just remove the wire from the back of the hub ???? thanks a bunch

[@5jjt]

Note: my 2012 had the abs wire route outside of the hub and not thrugh the hub.

[@thrashgoblin9926]

What would happen if you didn’t pump the brakes enough?