How to Replace Rear Window Regulator 02-06 Jeep Liberty

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@gracewagenveld7054]

Thank you! Where I live, there are basically no quality mechanics (lack of trade school/ programs). I needed a new regulator & watched your video & felt confident enough I could do it! I did it! Thank you for such clear & to the point instructions!

[@1AAuto]

+grace wagenveld Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@garymyers2250]

Great video. This is the 4th regulator I've replaced in this 2002 Liberty. All four windows are now good to go for another 20 years. Thanks for the excellent guidance, the narrative was easy to understand, no excess jabber.

[@BOwens1952]

Just finished my second installation. Last year was the passenger side, this time, the driver side. Both rear windows. Thank you! Save money on my retirement income!

[@1AAuto]

+BOwens1952 Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/WindowRegulators/Jeep/Liberty/1AWRG01583?KZbin&CTA+Comment&KHsnrPTlDMk

[@paullennox7686]

.

[@louiscapwell]

Bought my regulators from 1A Auto, installed them with the help of this video. Seriously painless, way to go guys!

[@1AAuto]

+louis capwell Nice work. We're glad the video helped you out. 1aauto.com?KZbin&CTA%20Comment&ATony 866-403-3393

[@CIGTexas]

Just finished replacing the rear passenger window regulator on my 2005 Jeep Liberty Sport. Followed your video and completed the job without any issues. Excellent video! Thanks

[@CIGTexas]

Just finish replacing the rear passenger window regulator on my 2005 Jeep Liberty Sport. Followed your video and completed the job without any issues. Excellent video. Thanks

[@matthewk956]

You fellas are gods. Ordered the part and have successfully fixed my rear left window following your excellent video. Thank you!

[@atlantavideo2dvd680]

Just finished installing the window regulator bought from 1A Auto and watched the video. Part - Excellent Price and delivery! Video was great - took about an hour because I couldnt see how he removed harness wiring after pulling red tab. I suggest for small stuff like that, show the part pulled out and where to press to disconnect . Otherwise - TY, saved 350$ quoted from my service center.

[@1AAuto]

+Atlanta Video 2 DVD Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@coletown_us]

Very helpful. Completed my first-time replacement in 50 minutes. No problems at all. Works great. Thank you.

[@joerich9636]

Thanks, very helpful. My regulator was still good, but for some reason the window became separated from the little carriage on the regulator which raises and lowers the window. After studying it for a few minutes I used a pair of channel locks to squeeze the ball joint on the carriage back into the window attachment. Not saying it won't happen again, it is working now. Your instructions made it possible for me to easily disassemble the door and saved me a couple of C notes. Much appreciated.

[@elwhastrummer]

Good video, one thing to add..I'd test the regulator before putting the door panel back on, cause you just never know😊

[@blackgold2029]

For future people looking at this video, someone had mentioned using a ziptie of the ball in the window doesn't snap through the pin. I just tried it and it works. There's your solution if the ball on the window keeps popping out. All you need it one zip tie.

[@bretvisalle7395]

THANK YOU!!!! I used this video step by step with success!

[@expertappraisalgroup5868]

Great instructional video!!! Thank you!!!

[@1AAuto]

+Expert Appraisal Group Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@mikes1412]

Thank you for your help! Just replaced driver front and passenger rear in 2 hours for 78.00 in parts. Dealer wanted 300.00 dollars for each. Think I'll take the wife out for dinner. Thank you again!

[@1AAuto]

Thank you so much for the great feedback! +Mike S

[@mikes1412]

@@1AAuto Now I just need the courage to change the heater core ! Thank you again

[@williamsarokin]

Great video, easy to follow, thanks!!!

[@AlmostReady504]

It is an absolute PITA JOB!

[@billrbca]

thanks . bought your part....couldn't be much easier

[@1AAuto]

+@billrbca Thank you for your order! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY

[@desharris2105]

Thank yall. As always, 1AAuto helps me out

[@QueenBubba59]

Awesome vid. Thank you for making it! I knew exactly what to do.

[@scrubbymcgee2]

Perfect instructions! Thanks!

[@1AAuto]

+scrubbymcgee2 Thanks for watching. We're glad you liked it. 1aauto.com 866-403-3393

[@robbiedrury4012]

so do you need to have the window down first?

[@elejes1218]

Which correct part is it for a 2006 jerp liberty build after 06/2006?

[@codydowns4643]

do u need the metal clip from the old regulator to clip the window on?

[@glazier4766]

It seems to me that the motor has to be rotated at least 1/3 turn to get the bolts to line up correctly. Another thing is the window guide is in the full closed position prior to installation. So I'm guessing I have to hook up the wiring harness, the lower it and then attach the glass???

[@joehumeas7196]

What makes the white plastic piece slide up and down (to get through window to slide up and down)? Seems like it’s floating and only attached to the window.

[@marioholod2123]

thank you from Venezuela....

[@crankinozzer]

Regulator includes the motor? Mine has a problem where you can hear the motor engage but it just skips making a grrrrr noise. Can I change just the regulator or have to do the whole thing?

[@johnlong5899]

Online shopping with you guys and watching your how to videos makes DIY easy and affordable. Your videos always demonstrate tips the DIY service manuals skip. Important when diving into something you've never done before. This is a great kit and well worth the 50 bucks per window. The length of the mechanical cables is much shorter than factory making install incredibly easy compared to removal of the factory original. The only quirk I found is the included window clip. The spring steel is not is good as the factory clip. Reuse the original if you can. It fits just fine and holds better. For panel removal, spend 10 bucks at Harbor Freight on a their yellow trim removal kit made of plastic. It does the job perfectly and scratches absolutely nothing. Do I trust the longevity of this kit? All I can say is I did both windows on my wife's Grande Am over 2 years ago with your kit and her windows operate today just like factory. She will tell you better than factory.

[@1AAuto]

+John Long Thank you John, We love to hear great stories like this from happy customers. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

[@liamodell7191]

For some reason, my window won't clip to the plastic part of the regulator. It only seems to go in just a little bit and then when I use the window it unclips.

[@chrisyates2422]

fantastic video

[@1AAuto]

+Chris Yates Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Condor1970]

The window became disconnected from the regulator. Is it most likely just a broken clip?

[@tydreves8002]

My 2005 Jeep liberty doesn't have the same assembly for the window mine has a metal clip that holds the window in and I can't figure out how to get the metal clip back in to hold the glass to the lift

[@wanderbread4217]

Why wont my window fully latch onto the track with the pin. When i put the pin in it seperates from the track? Also why wont the window roll all the way up? It goes up to an inch and stops

[@jimwertman2288]

Is this part an upgrade of the factory style? (since this seems like an extremely common problem)...thank you

[@mattgaming8717]

2022 and still in use. But I got the old style and the plastic is weak But allll good now

[@ledgm108]

Thanks for the great how to video. Ordered the part and swapped out the old one pretty easily

[@1AAuto]

+ledgm108 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@earlc5990]

I broke the Cheap white plastic part so it sticks up through the top of door frame. Which by the way was not the upgraded one that shows in this video. Now I had to reorder and hoping its not the cheap one again .

[@axelmartinez8443]

How do i figure out which one i need to get

[@comifern]

Hi would the same video work for a 2007 Liberty? Thanks

[@1AAuto]

It might be a similar process, but may not be exactly the same procedure. We do carry new window regulators for your 2007 Jeep Liberty. Here's a link to them if you would like to see what we carry. thanks for watching. www.1aauto.com/2007-jeep-liberty-window-regulator/y-mo-c/2007-876-16?KZbin&YoueTube&ATony

[@clokoharborarea9258]

*** Thank you so much for the information ***

[@1AAuto]

+C * LOKO * HARBOR AREA * No problem at all thanks for watching. Hope this video has helped you out. 1aauto.com

[@ed-pb2rm]

Does anyone know where I can find the part that actually attaches the window to the guide? My only option is to use a bolt or wooden dowel lol. Seriously help

[@zenaduran2371]

That was the hard part, but we over thought it.... just need to POP the window tit into the hole (Until you actually hear the click) then put the pin in... rest was easy enough. Video was a great help. Even for a girl!

[@1AAuto]

+Zena Duran Thanks for checking us out! 1AAuto.com

[@JDP20000]

My new one had no place for the clip to go back on, didnt work.

[@joehumeas7196]

Top clip won’t free the door panel.

[@MrSKYHIGH77]

Mine doesnt have a pin what do I do

[@1AAuto]

+Mr.sky High This video is applicable to the Jeep Liberty, years 02, 03, 04, 05, and 06. It may be a bit different for your application.

[@crankinozzer]

Many thanks for the video! Just finished mine, not as bad but one of the hang ups was not realizing the clip that attaches the regulator to the glass tends to slide back in place after you push the glass free, if you do not release and lift the glass right away it clips back on and I was really dumbfounded trying to remove the regulator and thought there was another clip at the top, after bringing the glass all the way down I realized my rookie mistake and unclipped again and moved the glass up right away! ¯\_(ツ)_/¯

[@lazerman121]

Someone tried to pry my window open and broke the window loose (thankfully the glass is intact). The motor is fine but the window slides down via gravity :/ not sure what is broken any advice would help thanks :)

[@ConfedVet]

NM... THX

[@9865321470ab]

Release the window from the regulator when down. You won't have enough room if you move and hold the window UP afterward.