√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@robertbrainard5651 Жыл бұрын
What size bolts houses the thermostat housing ? Mine are stripped and i bought nut breakers but i'll need to replace those but i don't know what i'm looking for.
@JenniferFultz-e3m9 ай бұрын
WOW! My best friend (30F) and I (31F) have never done anything more serious than change a tire on a car. We watched your video about 80 times and we did it! It took us 3 hours but we completed each step. We didn't take the belt off either, we actually removed the bolts and changed the thermostat from the bottom because we couldn't reach them from the top as we were both too short. Thank you!!
@KJ4RMZ4 ай бұрын
One of the best videos I've ever watched. Thank y'all.
@Anonymous--Troll9 жыл бұрын
Thank you for the video....you are the only one I found that could help me with my 05 liberty and I couldn't have done it without watching this. However, I saw no need to remove the belt for room....especially if you are one with no experience like me. With a ratchet extension that's 4 or so inches long it is relatively easy to get to the screws. I was able to get it done today with no issues. Thanks again!!!
@hectorrivera30214 жыл бұрын
these videos have been so helpful I've been saving a ton of money doing the jobs myself, thank you so much guys, i have a 2004 jeep liberty with your help she is running great again! stay safe guys
@1AAuto4 жыл бұрын
+Hector Rivera Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@pearcherry9859 Жыл бұрын
God bless you for donating your time and effort! Must be extra careful with the bolts being different length on the water pump. Thank you.
@AlexanderLopez-zg7quАй бұрын
Nice! Just bought my first Jeep 05 liberty that overheats intermittently. Gonna swap the thermostat first, and the belt looks loose, so the tensioner is getting swapped, too. This video is exactly what I needed. Thank you!
@oakensight18494 ай бұрын
I just replaced the housing unit and thermostat on my 06. This was a lot easier than how I had done it. Would recommend following it, even if replacing the housing unit as well
@williamowings68572 жыл бұрын
Thanks. I have an 04. A friend has a computer reader. I've been borrowing it about every 3 months lately. Thermostat is shot I guess. Nice to have a list of wrenches handy. 😆👍 Thanks so much for posting a how to video. I'm going to just going to go ahead and replace the belt while I'm at it.
@quicksears7 жыл бұрын
Great video. Special thanks for mentioning socket size (although my drain valve was different) and showing how to blead the air out. I've never done this before and it went as smoothly as your video.
@1AAuto7 жыл бұрын
+Ron Sears Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/1A/ThermostatHousingRel/Jeep/Liberty/GAEMX00001?KZbin&CTA+Comment&Nv0HpH2ymB4
@catherinetallyperkins76066 ай бұрын
This was one of the better videos I’ve seen. Thanks!!
@hodgesjoshuab9 жыл бұрын
To make this a little faster, you don't necessarily need to take the belt or the tensioner off.
@scottscoville11184 жыл бұрын
I left the tensioner on but I ALWAYS take off the ^%#$* shroud and fan (which is pretty easy) before I ever do anything up front.
@codyquinn49543 жыл бұрын
I broke two sockets trying to take the tensioner off before I realized this
@agary9183 жыл бұрын
@@codyquinn4954 That hurts buddy!😕 Always try to watch different videos and try to find your exact vehicle and model.
@kracker892 жыл бұрын
Yeah i was about to post this lol im in the middle of issues it was overheating and leaking from water pump replaced it and thermostat and thermostat housing and my water reservoir tank was leaking so now im replacing it and hopefully i van bleed the air out
@illuminatiagent76912 жыл бұрын
Thank you for video, unlike others, right on the subject with no horse poopy. Please keep on doing this, very helpful.
@anibalbabilonia186710 жыл бұрын
Wow! Thanks for the tutorial! Looks lime a simple job to do! I didnt even know where my termostat was located on the liberty! Now i know!! Thank you again.
@1AAuto10 жыл бұрын
Thanks for watching. Have a great day!
@chrisbarnhardt7 жыл бұрын
Great video!! You guys have helped me numerous times with these videos. Thanks!!
@Neighborly_Content9 жыл бұрын
Did this yesterday in about ten minutes (including stops to sip my beer). No need to remove the pulley, just use a 1/4" rachet with an extender and an 8mm socket. Thank you for the video though it was informative. Also when adding new fluid I simply remove the upper hose and filled the radiator with a bit of undiluted Mopar coolant, then added water to top it off. Replaced the upper hose then did the same coolant/water in the resevoir. Ran the engine with the heat on and kept topping off the resevoir tank for a few minutes then cap it and drive it around the block. I did this as a general maintenance item since I was already replacing the water pump at 138,000 on an '05 Liberty Limited 3.7L.
@shorthairtwin6 жыл бұрын
Thank you for posting this! It's winter here in the north and I seem to get a lot more heat inside while driving down the road, significantly less while idling. I haven't had any engine overheating issues but it has been less than 20 degrees outside. This job looks easy and cheap enough to try first.
@mathewdavis-adventuresandd66432 жыл бұрын
Thank you. WAY more difficult than the last one I replaced, 1976 ford XLT when I was 16, but at least I know how to tackle this project.
@1AAuto2 жыл бұрын
+Mathew Davis - Adventures and DIY Thanks for checking us out.
@marcsmith38817 ай бұрын
Great video, but I would like to add that the 2012 Liberty or any with the electric fan is an entirely different procedure. The coolant reservoir and washer tank combo, sit right in front, on top of the fan shroud and the procedure would be different.
@RalphlConant-he4ht9 ай бұрын
Pretty damn good keep up the good
@roysanchez4615 жыл бұрын
Thanks for the video. I did take off fan shroud so I didn't have to take the pulleys apart. Took me about 45 minutes total. Thanks for the help!!
@rodneyjarboe11115 жыл бұрын
2008 liberty has reservoir tank over top of radiator . makes it a little tougher job.
@azsunnin4 жыл бұрын
For a fact so I just did it from the bottom.
@WesMerc3 жыл бұрын
Thanks. I have an ‘08
@elainethomas9532 Жыл бұрын
Thank you for a great video 1A-Auto!
@lloyd-qt1mg4 жыл бұрын
Brilliant explanation ... just lovin'it! Thanks so much I'd support you all the way if I lived in the USA. (LWJ. Queensland. Australia)
@1AAuto4 жыл бұрын
+lloyd 4560 Thanks for checking us out! 1AAuto.com
@taylornkastner3 жыл бұрын
2006 liberty here. Did not need the 16mm wrench, it has a drain plug u can turn by hand. Also, had enough space to just put a wrench with 8mm and 4" extension and was able to reach both bolts easily. 10 min and I've never worked on a car lol Great vid tho if needed.
@jamesfrank5052 жыл бұрын
Clear and concise for what it explains, but for us amateurs out here, getting the grill off, the metal frame that goes on top of the radiator, getting the cowl off and how about the fan? All these steps have to be performed before you get to the stage you start your video at. Its incomplete
@ItsaRomethingeveryday4 ай бұрын
Thanks For this upload, Much appreciated 👍❤
@carrievogel39209 жыл бұрын
Thanks for the refresher, I will be doing this one tomorrow :)
@وليدالعصاوى Жыл бұрын
شكراً لكم أنا أحد المالكين لسيارة جيب لبيرتى 2005 أرحب بكم من ليبيا
@PG-BuySellTrade4 жыл бұрын
I know this might be a long shot but if you respond I’ll be so grateful. I have a 2007 Jeep Liberty automatic transmission. For the past few months I have been dealing with an on and off P0430. I will drive the vehicle a while like a week or sometimes it varies, and the light goes away but the code remains So far I have tried cataclean, and I replaced down stream bank 2 o2 sensor.. drove the truck until the monitors all showed complete with no check engine light and no codes when I scanned it. Next morning, it was pretty chilly out as it’s winter and I live in the Pacific Northwest, drove to work and the check engine light came on, scanned it when I got to work and had the P0430 and a new p0128. Followed the steps to your video and I went ahead and did my thermostat and upper and lower radiator hose. Did a complete drain and fill in my garage and burped and bled the system. Waiting for my drive cycles to complete before I know anything more but.... do you have ANY suggestions? Thank you for your time I really appreciate all of your Jeep Liberty videos.
@PG-BuySellTrade4 жыл бұрын
Thermostat was stuck open when I removed it as well.
@scottscoville11184 жыл бұрын
How do you relate your cooling system to your cat problem? I don't know, but ignoring the cooling thing, you just need a new (or used) cat in bank 2. But if your cat exit is hotter than your inlet, and if your exhaust pressure (test with a gage) is < 3 psi upstream of the cat, at the o2 sensor No. 1 hole, you might pass emissions if you can get the light to stay off, which can be accomplished by rigging a constant 0.8 dcV signal and sending it to where the o2 sensor is supposed to go, instead of the o2 signal. This will not affect your engine operation because the second sensor is only there to monitor cat health. But most likely, you just need to replace the bank 2 cat. Don't try to follow my advice as a recipe to success, just let it give you some ideas as you research and continue to troubleshoot for yourself. Because with cats and some other issues, it's really hard to tell without getting right into bed with them yourself.
@Clyde20162 жыл бұрын
Thank you once again guys 😉👍👍👍👍
@goosebeardmike84368 жыл бұрын
What did you say when the motor was running I couldn't hear any of it
@indridcold84332 ай бұрын
I was noticing that the engine has an electric fan. Do all Liberties have electric fans from the factory. I worked on one that had a belt driven fan and fan clutch. Granted, it did have a rather improvised look to it. But, it was put in very nicely.
@rlowle12282 жыл бұрын
Something I use to help hold belts on pulleys is close pins. It's like the 3rd hand we all need..
@davidsnyder2000 Жыл бұрын
Thankyou for a great video👍🙂
@DragonPop646 жыл бұрын
At 6:23 they say while running engine , use 8mm Allen Bit ( known as HEX bit) to unscrew and open up the Coolant Bleeder Valve. This will release all the excess air. THE ENGINE NOISE HERE MADE IT NEARLY IMPOSSIBLE TO HEAR THESE IMPORANT INSTRUCTIONS. This is the same clip they use for the Jeep Liberty WATER PUMP install video.
@mr.69yes838 жыл бұрын
Hi 1 a auto parts we really need a video for a 2011 Jeep Liberty Sport how to change the thermostat as the motor looks different
@markhomesteader38135 ай бұрын
Thank you. BiG help!
@operative0116 жыл бұрын
For those who choose to remove the tensioner, take note that it is reverse threaded. You can see in the video but it would have been helpful to mention this. You can easily strip that bolt otherwise and then you’ll really have a job on your hands
@mathewdavis-adventuresandd66432 жыл бұрын
Thank you, I didn't notice.
@mathewdavis-adventuresandd66432 жыл бұрын
Are you absolutely sure? I've view this video repeatedly and the only time the ratchet goes to the right is to release the belt. Looks like he is going left to remove the tensioner hub. I'm about to tackle this project this morning.
@zjaz80002 жыл бұрын
@ Casey McAllister Unless I’m reading you wrong, he went counter-clockwise when removing the tensioner bolts. What do you mean when you say that “it” is reverse threaded? What’s reverse threaded? Are you saying that the tensioner mount bolts thread counter-clockwise to tighten, and clock-wise to loosen? If so, it appears, to me at least, that the opposite is true, that is, clock-wise to tighten, and counter-clockwise to loosen. Maybe I’m missing you altogether.
@gavwa082 жыл бұрын
In the video it is a standard right hand threaded bolt.
@njjkrubi8 жыл бұрын
Nice job really helped! Thanks
@Brian_Gawlak5 жыл бұрын
Thanks. Got a P0128 fault code and already changed the coolant temperature sensor and the check engine light still came on. I gambled with the 50/50 chance of one of the two and looks like I'm gonna have to replace both to clear the code.
@dougalexander7204 Жыл бұрын
My experience was the plastic drain plug will give you problems. I wish I had just taken the hose off at the thermostat housing.
@sonnykaledi92782 жыл бұрын
Hi there...is it the same for the diesel 2.8 2005 model? Keen to hear back your take/ guidance please 🙏. Great video well done 👏
@MrJerryk55 Жыл бұрын
Did mine from underneath,no removal of belt etc, took 10 minutes. Sure that shops would like the procedure that takes longer so they can charge more.
@hunterpapillion75042 ай бұрын
I put a new thermostat and the housing unit is still leaking
@adzz8012 Жыл бұрын
Ngl.. i hate working on jeeps, but they look cool, and they drive good when running. (Currently doing the googlefu for a nice guy customer) also im from Australia :/ so jeeps dont have the greatest rep her.. but... i do like the coilpack tubes being part of the plastic inlet manifold... helps when a coilpack goes bad.. harder to diagnose lol.. also I love how easy the last two cylinders on the rhb are super easy to access due to the overflow bottle. Super great.. but most acess points on that block are not a complete dick to get to honestly. So not the worst ive worked on :) thanks for your vid btw mate :) helped me a lot.
@billnoller43455 жыл бұрын
Very helpful!! Much thanks 🙏🏼
@univision14894 жыл бұрын
Thank you for this video
@dcanon10 жыл бұрын
Do you have to put the heat on high when bleeding the coolant? Thanks. Always love the videos and have ordered parts from 1AAuto as well.
@1AAuto10 жыл бұрын
Thank you for watching Dennis. Yes you have to put the heat on high to properly bleed all of the air out of the system. Without turning the heat on high, air pockets can potentially be trapped in the heatercore itself, or one of the coolant lines for the heater core. Hope this helps! 1aauto.com 888-844-3393
@chrisrideout257 жыл бұрын
what are you going to do with that jeep liberty after doing all the work it is pretty much restored.
@1160rooster9 жыл бұрын
thanks for your video really helpful
@wccchoir20313 жыл бұрын
Very helpful, thanks. My cooling system works perfectly, temp guage always at 12 o'clock, but I can't get heat. I flushed the system...heater core flows freely. All louvers work...A/C system works. NO heat. Would a thermostat stuck in the open position kill my cabin heat?
@1AAuto3 жыл бұрын
+WCC Choir We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@lmadden62367 жыл бұрын
You could've just went in through the top or bottom with ease and completely avoid removing the serpintine belt and the tensioner.. I did this, that's how I know...
@bornvillain68197 жыл бұрын
Yup, I did it in a Walmart parking lot in 110° weather. No way was I wasting time like that lol...
@homarguerrero7324 жыл бұрын
@@bornvillain6819 Was this a Jeep Liberty 2011
@Imag1na710n8 жыл бұрын
Great video! Thanks!
@1AAuto8 жыл бұрын
Thanks for watching. We sell the thermostat shown in this video on our website. Here's a link to them if any of our viewers need to replace theirs. We also offer free shipping on all orders in the US www.1aauto.com/thermostat-%28195-degree%29-gates-33919/i/gaemx00001?KZbin&CTA%20Comment&ATony
@kennethpappas9 жыл бұрын
Why did you not mention at the beginning that you removed the fan and cover? Also my jeep heat seems to just get warm and not hot. Is this due to the thermostat being partially open? It does not overheat in the summer either. Thanks and appreciate your thoughts.
@kendrickgraff273118 күн бұрын
How much coolant was needed to fill the vehicle up? I bought 3 jugs wasn’t sure
@JackTheAviator8 жыл бұрын
Hey, I got my thermostat but when I put it on and screw it back on the housing was leaking from the bottom screw area. What did I do wrong? I cant tighten the screw anymore.. how hard do you push the thermostat into housing. Should it be stuck really good in there ?
@scottscoville11184 жыл бұрын
This is the problem I had to begin with. My thermostat worked fine but I was losing coolant rapidly because of a drip from this thermostat seal, and regardless of where it blows by, around the seal, it drips out at the bottom screw after flowing in the crack around the outside of the interface. My seal looks fine. I supposed a fresh fat seal on a new thermostat would fix the problem till I saw your post. If a new seal doesn't work, soaking the old one on both sides in blaster might help, and also I might try cutting out one or two circles from gasket material to place by the seal. Yes, you do want to make sure your seal keeps its shape when tucked all the way deep into the plastic neck recess. As in the video, DO NOT try to place the thermostat onto the engine side and then screw down the plastic neck over it. One more possibility - make sure the threaded hole for the bottom screw is not choked with white sediment to where it can't screw down far enough to properly clamp the plastic neck.
@jeremynachtman4626 Жыл бұрын
Could hear you really well at the end there.
@jdeltahotel7 жыл бұрын
I just came up from underneath. Only took 10 minutes to change mine out, plus drain and fill time.
@misaelvela27437 жыл бұрын
thanks for The video, it was ver y helpful i'll suscribe to your channel, excellent work, keep doing it!
@1AAuto7 жыл бұрын
+Misael Vela Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/ThermostatHousingRel/Jeep/Liberty/GAEMX00001?KZbin&CTA+Comment&Nv0HpH2ymB4
@HelloNewman937410 жыл бұрын
Replaced the water pump in my buddies Grand Cherokee. Filled the rad and ran it for a long while. Didn't seem to take much coolant. He started home and it started overheating. I'm thinking that his thermostat might be stuck closed. Also....it is possible that there is an air lock happening? It just seems like it isn't getting any anti-freeze through the motor. Also, if you add anything other than GO5 coolant will it gum up the motor?
@1AAuto10 жыл бұрын
Thank you for watching. There may be some air trapped in the system i would try bleeding the system again. 888-844-3393
@blackiechong434410 жыл бұрын
wrong advice!! I changed over to regular antifreeze and have no problems. It did not gum up the engine. If it did on yours it definitely has other issues
@conceri10 жыл бұрын
Blackie Chong You must use Go5 or HOAT antifreeze "regular" antifreeze will corrode the aluminum on the engine and the radiator as well as gaskets, causing major problems.
@edwardhyde7374 ай бұрын
Wth! You don't have to take the belt off. It's not even close to being in the way. Just use an 8mm to take the housing off. This guy is making it harder than it needs to be.
@andrewconlow56278 жыл бұрын
Thank you!
@Reds-Card-Case3 ай бұрын
What if the vent hole on the thermostat is at the 3 ocklock possition unstead of straight up? I watched a diffrent video that said to put it in the exact way it came out, and i did. Problem is, it was in the 3 ocklock possition when i removed it. Would this still work? I changed mine and now the idle is horrible
@josecalvo91064 жыл бұрын
Awesome bro thanks 🙏
@1AAuto4 жыл бұрын
+Jose Calvo Thanks for checking us out. 1AAuto.com
@michaelrios14437 жыл бұрын
awesome very informative.
@jasonmaloney46339 жыл бұрын
Why did you remove the belt tensioner? It isn't necessary to do so for this job.
@indridcold84332 ай бұрын
Have you considered running for Prime Minister? You have my vote!
@germannaranjo455210 жыл бұрын
very very good
@l.a.richards99878 жыл бұрын
My 2004 Jeep Liberty is overheating. Especially when I'm sitting if traffic, the gauge is almost on H (Hot). A couple of things I've checked. The radiator fan is turning and I can see coolant, which is fairly new, flowing back into the reservoir from a return hose. What do you think is the problem? It couldn't be the thermostat could it, if it looks like the coolant is returning to the reservoir? Thanks
@JackTheAviator8 жыл бұрын
running your engine on high is destroying the engine. Did you ever find out what is wrong .
@l.a.richards99878 жыл бұрын
I had a cracked radiator.
@JackTheAviator8 жыл бұрын
I would have imagined your coolant levels would have been low. and leaking if that was the case..
@l.a.richards99878 жыл бұрын
The coolant levels were a little low, but, there was no puddle under the jeep and I couldn't figure out where the leak was. I finally took it to the dealership, where they did a pressure test and found the leak.
@sergiorodriguez60739 жыл бұрын
No need to remove belt or belt tensioner. Also no need to drip radiator. But just my opinion
@tashinafletcher66155 жыл бұрын
Great video, easy to follow. Last part question, how long do you leave the valve open? Until only fluid comes from it, I assume? Also should it be bleed several times through the day?
@juanitawolfe98413 жыл бұрын
Thanks very much
@johannwiese88998 жыл бұрын
Very instructional! Do you have any videos for the radiator replacement of a 2002 jeep cherokee loredo and maybe thermostat replacement as well. Thank you
@ChrisClowder7 ай бұрын
You dont need to take apart pulley i replaced my belt .But for just thermostat you can leave pulley on
@greglewis168010 жыл бұрын
My Liberty has 107,000 miles. Nothing is wrong with the thermostat, but should I replace it as a preventative measure while changing engine coolant? If not, do I still need to drain coolant from the engine block by removing the thermostat or will all of the coolant drain through the drain valve on the radiator?
@Italianborn8 жыл бұрын
hi , i got the same car and was looking how install a block heater kit ? do you have a video on the same car and kit available ? if you do, tell me how much it is too !
@1AAuto8 жыл бұрын
We currently do not have an auto repair video on this particular install. Thank you for visiting us on KZbin 1aauto.com
@yeduieltz80055 жыл бұрын
I did all you said on the video and now my car won’t start any ideas of what I did wrong ?
@jaredtrout78615 жыл бұрын
Belts lined up
@Chumly40910 жыл бұрын
Ugh, I'm fighting that bleeder valve. It's really stuck in there quite well! And of course, it's the last thing I need to do and it's fighting me while the sun is setting. Well, back to the good fight!
@renatorosa483010 жыл бұрын
Thank you so muths
@jameslucas41814 жыл бұрын
I broke 1 of the 8mm bolts off the thermostat housing, it's not sticking out enough to get vise grips onto it. Any suggestions?
@muttnaughton92236 жыл бұрын
Why no gasket? I guess since I did a thermostat job times have changed. Thermostats come with built in gaskets now?
@sshillady6 жыл бұрын
I bought a gasket
@andiarrohnds51638 жыл бұрын
no torque spec on the tensioner?
@benio5000able4 жыл бұрын
Hi. But there is some differences in model 2.8CRD from 2003r? You must replace whole thermostat? I found this link i.e Poland marker.
@glennschaub63034 жыл бұрын
Why doesn’t the vent stick straight up ? When you position it into thermostat housing it doesn’t go straight up it more of a 45 degree angle ?
@patsnation33689 жыл бұрын
what is that called? the last piece you unscrewed for the air, i tried unscrewing with a L and i couldnt too hard
@beastlychase2 жыл бұрын
MAKE SURE YOU PUT THE RIGHT SIDE IN YOU CAN PUT THEM IN BACKWARDS
@michellechambers586310 жыл бұрын
My jeep liberty 2006 is stuttering or bulling back when i drive it the tire thing is on and occasionally the check engine light comes on any suggestions of what might be wrong with it
@hunterpapillion750424 күн бұрын
Mine still leaks was told I was supposed to put sealant around the rim. Yet you didn’t put sealant I’m confused
@JamesWhigham-wg1pc Жыл бұрын
Do I gotta have a gasket or can I use permatec
@shadyschevy3 жыл бұрын
Is this the same procedure and location for the 2.4l engine?
@1AAuto3 жыл бұрын
+shadyschevy This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
@TheSeancassady9 жыл бұрын
Having a problem getting heat in my 2003 Jeep Liberty. I have listened for the movement of the doors to allow air flow to change from hot or cold and I can hear them moving and I do get airflow but I am not getting any heat. Could this be the thermostat or is it something else? Car does not have a problem with overheating or running hot.
@kosherlife45079 жыл бұрын
Might have the thermostat stuck open or missing. If it's stuck open it won't over heat but also won't get hot enough to push heat to the cabin.
@TheSeancassady9 жыл бұрын
Hmm, ok I will check that. Thanks!
@juleskoudelka7 жыл бұрын
I have a 2006 Jeep Liberty and the heat is no longer working while idling, but starts working when driving. I've heard over and over again that all I need to do is to replace the thermostat. Is this accurate?
@1AAuto7 жыл бұрын
You may want to see if the radiator fluid is low. If the overflow bottle is low you may want to top it off. Hope this helps you out. 1aauto.com
@juleskoudelka7 жыл бұрын
Thank you so very much, much easier to just fill the fluid.
@1AAuto7 жыл бұрын
No problem, anytime
@wiccanslave60857 жыл бұрын
Julia Ivey that's the problem I had. At first it worked but then it appeared to be a leak. this morning my engine over heated but there was still fluid. And after adding two quarts of oil, which I was low, it's still over heating. so now I suspect the thermostat which is what lead me to this video. as I type this I'm sitting at a mapco waiting for my engine to cool down some so I can drive the next five min leg to get home. if it's the thermostat my guess as a typical female that knows almost nothing about cars is that the thermostat was slowly gong out and sticking until now it's finally stuck closed making my jeep over heat. I have a 2003 jeep liberty. same as the video just different year.
@Kelly-xf9hl7 жыл бұрын
It could be more than the thermostat. You could have a slow radiator leak or worse cracked head gasket. My 06 Liberty started having heating issues the same way as Julia and it progressively got worse. I even took it to a mechanic shop and they couldn't find a leak. Just said it was low on coolant and that there was probably air trapped in the system. They "burped it" and topped off my coolant and my heat worked great again for about a week. Then I noticed dripping on the right bottom of the radiator. Also I hope you mean you added 2 quarts of coolant instead of oil (talking about cooling system)... unless you added oil to your engine. Also if you ever have to replace the radiator only use OEM! Aftermarket radiators suck and don't last!
@Thevinylhouse10 жыл бұрын
my 3.7L motor has 10mm bolts on the housing, what is the torque for them?
@TravisKelleher10 жыл бұрын
When opening up the bleeder valve, do you just keep it cracked open until you have no air bubbles coming out at all?
@1AAuto10 жыл бұрын
Thank you for watching. Cracking the Bleeder allows any trapped air pockets to be let out. You keep it cracked until bubbles are no longer coming out. Hope this helps. 1aauto.com 888-844-3393
@Clyde_le_Cyanide6 жыл бұрын
Just open the coolant cap and squeeze the upper radiator hose till it stops puffing air
@billpike783810 жыл бұрын
What antifreeze is used? Is it the same as the radiator mixture 50/50?
@PrincessAshly6 жыл бұрын
Yeah....it all goes thru the same cooling system...
@gregrom6643 жыл бұрын
what is the part where the thermostat housing go's called? Mine is cracked.
@dkemp19779 жыл бұрын
My wife's liberty was really low on coolant. I refilled it and now the heater only blows hot when the car is moving. is that likely air in the system or a thermostat?
@jasong68959 жыл бұрын
Fixing the same problem right now on my wife's liberty, You are low on coolant, that is why it only blows while moving, (hours of research) when I refilled coolant it blew hot while idling. I am right now replacing the radiator because I discovered a leak on the top right of the radiator (only when running). This is also a common problem on jeeps. I ordered a replacement radiator and thermostat from Amazon for $90.oo total. If you have to replace the radiator, you should replace thermostat also, just a lot easier to get to. Best of luck to you.
@dkemp19779 жыл бұрын
+Jason G Found the Problem, turned out to be the water pump. Pretty cheap and easy fix
@anibalbabilonia186710 жыл бұрын
Sorry for the misspelling! I meant looks like a simple easy job.
@sosomelodies6593 ай бұрын
Why the need to remove other components and drain the coolant from radiator? Oh I see. So the shop can charge more for parts and labor hours.