How To Replace Sandpaper On Your Drum Sander | G0458Z | Grizzly Industrial

[@grega-kendalheightsdecorwo9511]

I am so glad I found this video... this setup is the same as a Craftex CX509N. I was at my wits end with this thing... no instructions on how to change the paper! Awesome video

[@ccchicken8889]

This drum sander is likely my next tool purchase. Getting good info like this helps my decision. Thanks!

[@grizzlymachines]

Great to hear this video was helpful! Please let us know how you like the drum sander once you test it out.

[@richparker7778]

Very helpful. Thank you

[@seanmichael5751]

also let me say your vids are excellently made ands extremely helpful and comprehensive. I am also ordering the g-1026 and without your vids I dont know that I would have made that decision.

[@grizzlymachines]

Hi Sean, We are glad to hear that our videos were helpful! Thank you for your feedback!

[@jamesward1855]

When I was trying to install new sandpaper. The spring came loose, is there a video on how to fix it?

[@bobfenwick5994]

Aaarrgghhh... I have egg on my face!! I was not doing the sandpaper installation correctly. Having done it right, I think now it will work fine.

[@nethead72]

Where is the hook and loop upgrade? You guys would make bank if you had one for this model.

[@22tadi]

Thank you, very helpful as always, can you make video of how to adjust the table? Also I want ask how much the feeding cover belt?

[@grizzlymachines]

Hey there! I've passed on your video suggestion to our team, we love getting feedback on what kind of videos we should be putting out! As for the price of that part, pricing and availability for all parts of this machine can be found and ordered from www.grizzly.com/products/g0458z/parts - I hope that helps!

[@AbdurRahman1R]

👍👍👍👍

[@seanmichael5751]

how doers this sander do on cabinet doors (primarily simple shakers) and how many will it do before needing changing. i know you cant give an exact figure but will it greatly add to my cost of production? (I may be doing thousands of these) I mat get 2 so I can use one for leveling the doors and one for fine sanding, if they will work well for this purpose.

[@brandonteffeteller3133]

My manual says to cut the angle at 12” down, which is correct? I also had the spring get dislodged but spent a few hours getting it fixed back up by removing the drum.

[@grizzlymachines]

Hello! We recommend always trying to use a previous-used piece of sandpaper as a template, if it offered the perfect fit for you. If creating a new cut is needed, follow the cut diagram in this video step-by-step, then install the paper. Measurements provided in the video offer a great fit for the G0458Z sanding drum, though some users do like to cut the sandpaper a little longer (with the same angle cuts shows at 3:00 in the video), and then work through steps to bring the paper down to an exact size that way. Either way, always ensure you twist the drum to engage the spring-loaded tension to get the best results. Hope that helps!

[@ilovewrestling1000]

can you use sandpaper with adhesive on the back?

[@grizzlymachines]

Hi Dan! Yes you can use sandpaper with adhesive on the back. It's just a bit difficult to get lined up correctly so it will wind on the drum properly. Feel free to reach out to our technical staff with more questions! support.grizzly.com/hc/en-us/sections/4404707511319-Chat-Phone-Email-Fax-Mail

[@nancyscheneman4967]

HELP !, While replacing paper we experienced the spring from the drum actually fell off or out . Have know idea how but it did or how to get back into place. Any pictures, or instructions on how to get back in working condition ?

[@grizzlymachines]

Hello! For technical help including instructions and assistance with replacement parts if necessary, please contact our technical department! All of our contact information can be found at www.grizzly.com/contact and we'd love to help you out with this.

[@wayneclark4703]

I just bought the 458z. when i cut the 3 in tape to length it is longer than it needs to be on my right side by about a full rotation of the drum. what am i doing wrong?

[@grizzlymachines]

Hi there! If the belt is over-rotating on the drum, there is a strong likelihood that the measurements on the sandpaper roll, as called out at the 2:49 mark in the video, might have been pulled from the short point-to-short point, which could be the cause of the excessively-long sandpaper. If the overall paper is cut to 86" point-to-point, and the angles are added as shown in the video (plus, be sure to rotate the spring-loaded drum!), you should be good to go! Hope that helps!

[@davidmurray1729]

where can we buy CONVEYER BELT

[@grizzlymachines]

Here is a link on the Grizzly website: www.grizzly.com/search?q=sanding+belt. Our technical staff would be happy to answer any other questions you may have! Please contact them by filling in this link or calling [phone]. support.grizzly.com/hc/en-us/requests/new