How to replace spark plugs on 2013 Honda Accord

2013 Honda Accord with 4 cylinder 2.4 Liter DOHC 16V iVTEC engine

[@martinisreb9502]

Thanks for the guidance. Especially for the instruction NOT to adjust the spark plug! This has been the best video on KZbin. Keep posting videos please

[@ewnaly]

The toughest part for me was getting the electrical connectors off. Once I mastered that everything went smoothly. Thanks for your excellent instructions. Saved a bunch!

[@insaynbcr]

NGK/Denso both list on their websites not to use any lubricant or anti-seize on the metal plated spark plugs. If lube or anti-seize is used, you absolutely need to reduce the torque by 20% from dry torque to reduce the chance of stripping the threads in aluminum head or breaking the spark plug. The zinc-chromate shell on NGK/Denso plugs is designed to act as a lubricant as well as anti-seize corrosion prevention. This shell is designed to break away from the spark plug during removal after being cooked in place during the service life of the installed plug. The black oxide plug definitely need anti-seize during install as they do not have this sacrificial zinc shell.

[@hardhead5674]

This is easily the best set of videos on basic service for a 2013 Accord LX that I have seen. I appreciate viewing this and the videos on the fluid changes. Thanks for taking time to make and post the videos. Very well done.

[@gigithomas8013]

Finally, someone who took their time to teach well..Thank you

[@shafer147]

Likely happened off camera, but *highly* recommend using compressed air on each of the spark plug wells BEFORE removing spark plugs. Don't want any debris getting into the engine.

[@Jimmy-Legs]

Good tip. Thanks

[@stevesabol4568]

You produce the best how-to Honda videos! Thank you

[@cardo1111]

Excellent vid, I would like to add if I may suggest putting some dielectric grease on the spark plug insulator tip where the boot clicks on, to prevent plug arcing and aid in future boot/coil removal 👍🏽

[@zachplank3191]

This is such a good video, this guy needs to make more videos

[@rhondahunt9888]

If i had the tools, i could do this, thanks to your lesson!

[@youadido]

Hi Rhonda , a wise man told me to spend money in tools and do the job yourself and you will save money plus having tools for another thing in the future.

[@dtsouza2519]

Excellent video. Thanks for taking the time to make this

[@steveparish9210]

Excellent video and advice

[@DeserieDonae]

Such a great video! Appreciate the detail.

[@bobmoe9221]

Great vid. Easy to follow. No superfluous rambling. How much for the fancy torque wrench?

[@wsantschi7362]

Excellent video.

[@jupiterl7583]

Thanks for you share,it’s real helpful for me

[@timpemberto]

Great video. Well done and good angle.

[@filibertovargas8354]

Good job sr Thankyou very much

[@D4x4Bronc]

some good tips about not gaping the plug

[@pw52]

Thank you so much for sharing!!!

[@davesnipes7926]

Great video and I love your accent :-)

[@Tommerd]

Thanks! Take care.

[@smarttwix4835]

Very good 👍👍😍

[@kompuxperts]

Nice vid, quick question, wheres the fuel rail pressure sensor of this same model ? (Accord 2013) thanks in advanced.

[@aliz.526]

Hi I see they are expensive plugs whats next best I can use? Thanks

[@JohnS-il1dr]

How long does denso plugs last? 100k like the NGKs?

[@agneshendrix9261]

Is the torque wrench 1/2 dr or 1/4 dr

[@estrada_559]

What if u were to mix the coil plugs up..what would happen?

[@JohnS-il1dr]

You might get misfires because each coil has physically adapted to their respective spark plugs firing characteristics

[@bludragontruck9743]

@@JohnS-il1dr But you’ve changed all the plugs

[@dommancusa5356]

$22.00 for each spark plug in Virginia.

[@WillKarst]

What if one of the tubes is full of oil...

[@NHPhamousPolo]

then u have a leak, valve cover gasket maybe?

[@ddaq6452]

Look up Gene Kim n Chuck missler on KZbin

[@telkon]

Did you say $22 a plug you have lost all credibility with me

[@Jose-S914]

Here in Westchester County, New York, the Honda dealerships usually charge $28.00 to $29.00 for each Denso spark plug.

[@billteleisha4251]

@@Jose-S914 I guess that is why no one goes to the dealer anymore. Here he purchased it from the dealer when he did not have to. Amazon has it for $17 and there are many many substitutes that are a fraction of the cost. I bet they operate the same and due to the ease of replacement can be replaced easily if they wear out quicker. Glad I don't live in Westchester.

[@Lionsafari1]

@@billteleisha4251 How often is spark plug job done... having oem parts from the dealer u can’t go wrong with that... online has so many fake copies n replicas is disgusting..

[@JohnS-il1dr]

@@Lionsafari1 rockauto has the real deal for a fraction of what is selling at Amazon