How to replace starter and start motor Toyota Camry. 2.2 liter engine. Years 1991 to 2002.
Пікірлер: 48
@RobertoGarcia_anti_illuminati9 жыл бұрын
Very good job straight to the point !! no rock music or unecessary commentary....and very useful for me...now I go outside and take out my starter
@PeterFinnTheCarDoctor9 жыл бұрын
+Albert Gonzalez Thank You. :-)
@themasslesspenguinАй бұрын
Just changed out the starter in my Celica. Thank you for all your videos on the 5S-FE! They've been a great help!
@PeterFinnTheCarDoctorАй бұрын
Thanks for comment. 😀👍
@SkaterTE2 жыл бұрын
I have no gear friends and grew up with no father figure.. atleast I have KZbin. Thanks my guy
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks 👍😀
@depthchargebetty38135 жыл бұрын
Thank you Peter! Very simple and precise. I wanted to have the old starter out before my Dad arrived this morning with the replacement!
@MyAlbertC Жыл бұрын
Good job Pedro 👏 now it's my turn to do the job and buy the way the long rod is called an extension can be 1/2 or 3/8 and bigger. Thank you for your video 📹 from USA California
@PeterFinnTheCarDoctor Жыл бұрын
Perfect!👍
@Chris-kq7ko4 жыл бұрын
Very slow to explain and kind of gets off topic but thank you. Couldn’t do it without you
@PeterFinnTheCarDoctor4 жыл бұрын
Glad it helped
@shilau10 жыл бұрын
Peter, hello, these were great cars, very reliable, meticulously built, excellent engineering! Nowadays Toyota is not the same anymore and things are worse. The same for Honda, the best cars have been made before early 2000, afterwards from 2002 Honda's quality has had a big drop.
@PeterFinnTheCarDoctor10 жыл бұрын
shilau You are right. There is a little weaker parts now.
@shilau10 жыл бұрын
Peter Finn Thank you Peter.
@Trd20207 жыл бұрын
shilau I had a 2008 Honda civic. What garbage of a vehicle. I was always in an do it of the mechanics shop.
@disyokerr7 ай бұрын
Looks like you are right, My Civic 19895speed y got it second hand with 170000 milles in 2010 i sold it one month before pandemic explode march 2020 with 423000 milles on it no problems only gasket for my own negligence last 2 hours to sale same day 3 people showed up, after that people keep calling to buy my car... I sold it because i diden t know how long covid will last... super great car,@@Trd2020
@brinbart79998 жыл бұрын
Not sure how the bolts you showed proved any kind of quality, but I have 1996 Camry and it is definitely a quality vehicle. Thanks for the help with the radiator and starter.
@PeterFinnTheCarDoctor8 жыл бұрын
+Brin Bart Thank You for comment. :-)
@eaglemac9 жыл бұрын
Thanks Peter,Nice job explaining that..I havent replaced a starter since late 70's,Glad I dont have to lay on my back under the car to do this one...
@PeterFinnTheCarDoctor9 жыл бұрын
AL MacDermid Thanks for comment. :-)
@goofyvideos6 жыл бұрын
Thanks for posting; saved me the trial and error. Appreciate it.
@PeterFinnTheCarDoctor6 жыл бұрын
Thanks for feedback. :-)
@CatNaps337 жыл бұрын
Thanks for posting this video it really helps... you saved me a little money I very much appreciate that... again Peter Finn thank you.
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks for comment. Best Regards Peter
@robertlee3209 жыл бұрын
Peter, You are super good, I have watch and learnt a lot.
@PeterFinnTheCarDoctor9 жыл бұрын
robert lee Thank you!
@niceguyed97476 жыл бұрын
Mr. Finn... great video, shows every part of removing and replacing starter clearly. Now I can take it out and test it. :D
@PeterFinnTheCarDoctor6 жыл бұрын
Thank You for Your comment. :-)
@JohnDoe-qq8et8 жыл бұрын
Peter Finn is the man!
@PeterFinnTheCarDoctor8 жыл бұрын
Thanks your comment. :-)
@Electronics619 жыл бұрын
Hello Peter, very useful video. Excellent to the point. Thanks. One thing I want to be sure is the torque on the two bolts. Is it 40 Nm or 14 Nm? Please help clarify. Once again many thanks.
@PeterFinnTheCarDoctor9 жыл бұрын
+Electronics61 40Nm.
@cugir3214 жыл бұрын
Is there a way to shim this type of starter on a camry. I have a 1995 camry. I replaced the factory starter with a cheap ebay one. It starts okay but has a grinding sound....not real bad but does grind.......always starts. I don't see a way to shim these starters because it won't seat completely against the engine with a shim. I never had this problem with the factory starter so I'm guessing the flywheel teeth are okay....it's the new starter teeth not engaging the fly wheel perfectly. It was starting to click maybe once every couple weeks so I changed it so it didn't go completely bad.....I'm wondering if I should just replace the solenoid contacts and put the old one back on.
@TheHighwinder Жыл бұрын
Replacing the starter is easy, anyone can do it in their sleep. Why didn't you show the removal of all the crap around the starter, particularly the cruise control module? That's the hard part.
@PeterFinnTheCarDoctor Жыл бұрын
👍
@josephfoster305 жыл бұрын
I have a 1992 Toyota Camry and when I turn the key sometimes nothing happens. I have noticed if I rock the car back and forth then it will start....do you know if it’s starter going bad or something else?
@MyAlbertC Жыл бұрын
Peter guess what I have to do today, right my wife starter. 😂🤣😅
@PeterFinnTheCarDoctor Жыл бұрын
👍😊
@APiTBuLL16 жыл бұрын
Is this the same procedure for the 1994 toyota celica with the 5s-fe engine?
@PeterFinnTheCarDoctor6 жыл бұрын
Yes
@victornaja-paz52418 ай бұрын
what is the going price to replace this starter price and labor???
@PeterFinnTheCarDoctor8 ай бұрын
Noted 👍
@chechenio699 жыл бұрын
Thanks!
@PeterFinnTheCarDoctor9 жыл бұрын
+Sergio Achard Thank You for feedback ! :-)
@Sixrabbbit7 жыл бұрын
I have a 91 Lexus ES 250. Same process?
@PeterFinnTheCarDoctor7 жыл бұрын
Yes, Sir ! :-)
@Sixrabbbit7 жыл бұрын
Thanks. It was pretty easy, though I needed use a breaker bar to take the bolts out