How to replace Toyota Camry Starter - FAST & EASY!

[@kingdomlyfe101]

Thanks man! I’m not a mechanic but when your low on funds you gotta do what you gotta do! Thanks for the tip

[@DIYwithMichaelBorders]

Jorge Rodriguez Thanks for watching & you’re spot on Jorge. Saving money now is more important than ever. Us fellow DIY’ers need to stick together. Keep us posted. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jaymocalcus77]

I just changed the starter on my GFs 99 Camry - I watched this video and banged it out in 25 min - thank you!

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. That is AWESOME! We are honored to read this and we appreciate you sharing your experience. Your engine will benefit greatly with that newly installed Starter. 😁👍 Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@adadof]

Excellent DIY video my friend !!!!!! Clear, concise, easy to understand, short and to the point, excellent camera positioning and audio level. What I really love is that there were no stupid comments, profanity, dawdling, shaky camera or trial and error steps (except for the bottom air cleaner housing, which was totally OK) Kudos to you and all the best from Montreal Canada. You have given me the confidence I needed to go ahead and change my own starter instead of bringing it to the local mechanic.

[@DIYwithMichaelBorders]

Thanks for watching & that’s very nice of you. We appreciate that. Welcome to the DIY Raptor Club. Keep us posted on your project & any questions you may have. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@gradyrm237]

This guy is the Bob Ross of auto repair. I'm super relaxed. All my frustrations are gone.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this. How did your DIY project go?

[@gradyrm237]

@@DIYwithMichaelBorders Starter is ordered. Replacing this Saturday. I'm replacing the relay too. Just cuz. Hope it's as mello as your video. Ha

[@DIYwithMichaelBorders]

@@gradyrm237 It will go great, we are here to help answer questions as you work through it. 😎👍

[@sarahjansen1620]

Worked great for replacing my starter on my 2000 Camry! I've never done a major car repair, so it took a bit more than two hours. For newbies, word of advice: make sure you have the 14mm socket, because many socket wrench sets (especially the cheaper ones) don't have it. Make sure you have a socket wrench extension. Also, you'll need a 12 mm regular wrench to remove/tighten the power line bolt, as that's a super tight space. Last thing - make sure the air box cover clicks in in the back before tightening the latches on the front. Thanks again for a great video!

[@DIYwithMichaelBorders]

Thanks for watching & sharing this, hope all is well. 😎👍

[@leamhall]

I am not a mechanic and didn't know where the starter was before watching this video. With the clear instruction I was able to replace the starter and get the car running again. No spare parts, either! Thanks!

[@DIYwithMichaelBorders]

Great to hear & we appreciate you watching Leam. Sounds like you’re back up and running. Us fellow DIY’ers need to stick together. Enjoy your day. 😎👍🔧🔩

[@chuckarelei]

just to follow up and let all your subscribers to know; i just changed mine this morning. with your detail where everything is and needed to be removed. everything from set-up to clean up and the first test start (crank) took less than an hour and a half. could've shaved off a few minutes if i didn't struggle with the bolts trying to fit the new one in, not wanting the strip the thread. anyway, thank you again. your step by step explanation just makes life easier for everyone. keep up the good work.

[@DIYwithMichaelBorders]

Thank you so much, this means the world to us. A special thanks to you for taking the time out of your Wednesday afternoon to share this. Great to hear the DIY project went well. Enjoy! 😎👍

[@L3ONARDO07]

Dude, thanks to your video I was able to replace it myself in only 1 hour. Definitely saved a couple hundreds bucks!

[@DIYwithMichaelBorders]

@@L3ONARDO07 We are honored to help. That’s awesome it took you only one hour. Enjoy that rewarding feeling earned by making it a DIY project. 👍🧰

[@busymomy1625]

Great, short, thorough video. Perfect how you explain what everything is that you remove and the size tools. Chose your video for my 18 year old son and his friend to replace his 1999 Toyota Camry starter. Thanks a lot!

[@DIYwithMichaelBorders]

Jennifer Halsey Very cool & thanks for sharing Jennifer. Definitely let us know if you or you son has any questions. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@timgifford4637]

Great job! Your calm demeanor during this video inspires confidence. I have 140k miles on my 96 Camry and when the time comes to replace the starter I will refer back to this and tackle it myself. Liked and subscribed.

[@DIYwithMichaelBorders]

Tim Gifford Thanks for watching Tim & we are happy the video helped. That’s exactly why we enjoy making these helpful videos for our fellow DIY’ers. 😀 We are motivated to give others the confidence needed to tackle their DIY projects. Many more helpful videos to come, thanks for subscribing Tim, we subscribed back! 😎👍🔧🔩

[@mj-7444]

That time is very near

[@chrissims9351]

This is why I like Toyotas. Easy access and easy to repair.

[@DIYwithMichaelBorders]

Thanks for watching Chris, Toyota definitely makes it friendly to work on. Let us know if you have any questions.

[@Thea_MojaveOutliersWhipmakers]

At the moment there are about three KZbin videos up dealing specifically with 97-01 Toy Cams, and this one is the best, because it shows everything from start to finish--granted the finish is just a review of what needs to be done to put everything back together. It's a relatively simple job, but if you're not a mechanic and you don't have much experience, this is quite important. Coupla things I learned that weren't mentioned: WD 40 helps, but not always. A breaker bar is VERY helpful if your bolts are stuck, especially for the bolt in the back side of the starter, because space is cramped so it's hard to get enough leverage. I got a breaker bar for $10 at Harbor Freight, which I figure is good enough, as I'm not a pro. I'll prolly never use it again unless someone tries to car jack me or something...lol!

[@DIYwithMichaelBorders]

Thea DesertMinx Read Thanks for watching & sharing your thoughts. We are so pleased that you would take the time to share your comment. We really appreciate it! We really enjoy making these videos for our fellow DIY’ers like you & us. That’s really helpful info you shared & will come in handy for future viewers. Definitely keep us posted with any questions you may have along the way, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jballs1118]

Nice work good video. I texted you in a different video regarding the timing belt and a crank no start on a 1996 Toyota Camry le 4 cylinder. I replaced the timing belt, water pump, the hole distributor, rotor cap, spark plugs wires, the crankshaft sensor, the camshaft sensor which is the hole distributor, alternator belt and starter. Didn’t get the car to start am getting a crank and no start. I did everything to specs still no start. Any advice will very much help thanks for responding back to my previous text

[@Thea_MojaveOutliersWhipmakers]

@@jballs1118 Did you mean to post this as a reply to my comment?

[@drivewaygarage1561]

I watch a lot of KZbin videos from mechanics and I even make my own and yours is one of the best I've watched, very thorough.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing your kind words. Us fellow DIY’ers need to stick together! Definitely let us know if you have any questions, hope all is well with you and your family. We like your channel, keep in touch. 😎👍🔧🔩

[@oswaldburga9836]

Fantastic video, you were terse and to the point with good camera work showing clearly what needed to be done. Well done Thank you.

[@DIYwithMichaelBorders]

Thank you, that means the world to us. Please let us know if you have any questions. Enjoy your week. 😎👍

[@danrecine1988]

Great video. It took me an hour start to finish. On my 1994 Camry Wagon US built I did not need to touch the cruise control bolts, only the air cleaner housing.

[@DIYwithMichaelBorders]

Dan Recine Awesome job Dan, that’s great to hear. Thanks for watching. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩

[@rabidbeagle]

I literally just did this on a 99 V6. I did not remove the cruise control actuator. You can do this and work around those cables, but why deal with the aggravation? Also, my starter was stuck in place. Nothing a 2x4 and s hammer couldn't fix. Definitely a job easy enough for a diy'er and this video does an excellent job demonstrating what needs to be done. On a different note, you can order parts online and then pick them up 30 minutes later at your local parts store and save money. I used Advanced Auto. The starter was $115. You enter a code that they usually post on the top of the page, and I saved $25. Then there's a $25 core charge. The entire repair cost me under $100. So check your local auto part chain's website and you might be able to save some money. Anyway, awesome video!!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing this, us fellow DIY’ers need to stick together! Any & all helpful info is greatly appreciated. Nothing more rewarding than a successful DIY project, and obviously saving money. Enjoy your upcoming week. 😎👍🔧🔩

[@bmattox79]

Awesome video that was probably one of the best DIY mechanic videos I have seen 👍

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We really do appreciate you sharing your kind words. Us fellow DIY’ers need to stick together! Let us know if you have any questions, hope all is well with you and your family. 😎👍🔧🔩

[@JamesJones-uv8qp]

I will be using your video to change the starter in my 2000 Toyota Camry LE V6. The video was excellent. Step by step where I can understand the DIY removal of the old starter.

[@DIYwithMichaelBorders]

Good morning ☕️ We are honored to read this. How did your DIY project go? Looking forward to hearing back from you. 😎👍🧰

[@JamesJones-uv8qp]

@@DIYwithMichaelBorders I put the starter into my car step by step as you did on your video. I also DIY my alternator and replaced my spark plugs. However, I still have some misfiring going on. Any suggestions?

[@DIYwithMichaelBorders]

@@JamesJones-uv8qp Thanks for the follow up. By chance, did you apply dielectric grease to the plugs? If so, we recommend cleaning it off and seeing if that helps. If you apply too much dielectric grease, it can work against you.

[@JamesJones-uv8qp]

@@DIYwithMichaelBorders I found out from the Toyota dealer that it was my Camshaft Position Sensor

[@DIYwithMichaelBorders]

@@JamesJones-uv8qp Thanks for the follow up. Will you be replacing that part as a DIY project or will the service station be replacing it? Let us know if we can help. 😁👍🧰

[@StreetRailProd]

glad I found this video! I have a 2000 camry where the starter is stuck to where even after I took car off it was making a whining soud! Had to disconnect the battery to make the starter stop! I am going to attempt this when the weather gets warmer here in NY!

[@sakimacales6932]

Best video on how to change the starter in my Toyota Camry.

[@DIYwithMichaelBorders]

We really appreciate that, thanks for watching & sharing this. Hope all is well with you and your family. 😎👍

[@keiths8370]

nicely explained !! thats how us lackeys want it - step by step - THANK YOU SO MUCH

[@DIYwithMichaelBorders]

Good morning Keith, you are very welcome. Thanks for watching. 😎👍

[@janinesnider4062]

Thank you so much ! Very well presented and clear and precise directions. I appreciate you sharing this instructional video, Thanks again and God bless you

[@torizoom]

Excellent video. Very well explained step by step instructions and easy to follow. Currently I have a 1998 Camry with 140K on the car. This morning I was trying to start it but the starter only click. After I came back from breakfast I jumped the car incase the battery wasn't charged. I tried to start it but only click once again. I waited for about a minute or so to start it but it cranked very little and clicked again. I remember my brother hitting a starter with a hammer on the starter bendix and it worked on the cars he worked on. So I did the same thing to the Camry starter and it worked. I hope that it will continue to work, but if it doesn't I will know how to replace to stater. Thank you very much for the video.

[@DIYwithMichaelBorders]

Tori G Thanks for watching & we are happy the video helped. Definitely keep us posted. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@oscaraguilar4379]

Great video I own a Toyota Camry I have had it for 2 years & I never knew where the starter was untill I saw the video thanx.

[@richardmislivets4426]

Great video! Right to the point and easily explained. Even with a slightly different layout I had no issue replacing the starter. It was actually a "relaxing" repair, if that's such a thing.

[@DIYwithMichaelBorders]

Thanks for watching & it definitely is a thing every now & then. 😁 We appreciate you sharing your experience Richard. Us fellow DIY’ers need to stick together! Hope all is well, enjoy your week.

[@user-uh6fd3wr1b]

Excellent video. Very well done. Only took me 34 minutes. Thanks alot .

[@DIYwithMichaelBorders]

You are very welcome & thanks for watching. A 34 minute successful DIY project definitely puts you in a good mood. Welcome to the DIY Raptor Club. 😎👍

[@Fuzzy1075]

Nice video.. short precise, and well explained. Perfect needed info for a repair of friends 1998 camry. Well done!

[@DIYwithMichaelBorders]

Thanks for watching, that’s our #1 goal. Get you the required info without wasting your valuable time. 😁👍 Let us know how the project goes. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@oby-1607]

Michael, that was great. Our starter is failing fast and I have one on order.

[@DIYwithMichaelBorders]

Thanks for sharing this, we appreciate it. Keep us posted on your project after you get the new Starter. 😎👍🔧🔩

[@ConnorRB]

Thank you so much man. I have a 1999 camry and was able to swap in a new starter. This vid helped so much

[@DIYwithMichaelBorders]

Awesome, and thank YOU!!!! We appreciate you taking the time out of your Wednesday afternoon to share this. Enjoy the New Years!

[@CopperTop2024]

Excellent video.. mine is at 204k miles taking it out to be sent in to solid rebuild.

[@TulsaDrones]

Outstanding tutorial, nicely done!

[@DIYwithMichaelBorders]

That means the world to us, thank you. Reach out to us any time.

[@mikelang5067]

Thank you so much for your time making this video! I truly appreciate it!

[@DIYwithMichaelBorders]

Mike Lang So glad to help & we appreciate you watching. Let us know if you have any questions Mike. Us fellow DIY’ers need to stick together. 😎👍🔧🔩

[@inyanhopad6214]

Thank you very much for this video. You did a great job being patient and calm ,with good detail that gave me the confidence to give this a try . And the car cranked the first time! Thank you again for a great walkthrough.

[@DIYwithMichaelBorders]

InyanHopa D Thanks for watching & we love reading comments like yours. We love KZbin. Us fellow DIY’ers need to stick together. Many more helpful videos to come! We appreciate you sharing your thoughts. Great job on completing your DIY project. You Rock! 😀 Hopefully you will subscribe to the channel. Thanks again! 😎👍🔧🔩

[@inyanhopad6214]

DIY With Michael Borders I have subscribed to your channel and am very impressed with the selection of videos and the vast selection of topics . I am curious if you have ever replaced a fuel pressure sensor on a 200 Camry ? Mine needs to be and I’m not having much luck finding information on it . And thank you for the compliment on changing out the starter , I honestly couldn’t have done it with out you !

[@DIYwithMichaelBorders]

InyanHopa D Thanks for watching & we appreciate you subscribing. We have also subscribed to you. Unfortunately we don’t have a video on that part replacement. 😎👍🔧🔩

[@shelbyindianajones3226]

Cool thanks if my mechanic friend doesn't get it done guess I will give it a try. Gotta do the valve cover gasket too (probably leaking into the starter).

[@DIYwithMichaelBorders]

Good morning ☕️ either way, we are here to help you as you work through it. Keep us posted. 🧰

[@michaeldunagan8268]

Great instruction. Perhaps a bit of baking soda and a brush to clear the corrosion on the positive terminal of the battery-while you're in there.

[@DIYwithMichaelBorders]

Thanks for watching and sharing your thoughts. Any and all helpful info is greatly appreciated. Thanks again Michael.

[@matthewbim10]

Excellent video, my car is doing the exact same thing as you mentioned in the beginning. First video that gave the exact symptoms (multiple turns to engage). 3:00 be careful with multi screwdrivers, the bit may not always stick in the fastener and can fall deep into the engine bay.

[@DIYwithMichaelBorders]

Thanks for watching & you are very welcome. We are hanging out today at the DIY Raptor headquarters watching college football answering all questions for our fellow DIY’ers. Keep us posted on your project & any questions you may have. Enjoy your weekend. 😎👍🔧🔩

[@matthewbim10]

@@DIYwithMichaelBorders I just finished, car starts first turn now no problems. Thank you!

[@DIYwithMichaelBorders]

@@matthewbim10 That’s great news & we appreciate you taking a moment to share. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@puffalump76]

If a starter is going bad..will it 1.need several turns to start? 2.will it engage spotter and stay tht way if key ignition is off?

[@DIYwithMichaelBorders]

Cerulean Sealpup Thanks for watching & we hope the video helped. It will do both actually. Once your Starter begins to lose your trust...it’s time to change it. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@71donkrider]

Guys like this are the real mvp

[@michaelslater6839]

My symptoms are exactly the same as yours. However, sometimes it take 20 turns of the key. Lol. It’s much worse when it’s cold. . Although my battery voltage is low in the morning 12.1 volts, jumping it makes no difference. And rapping the starter with a crescent wrench seems to help. After I will replace the starter I will let you know if it fixes it. Thanks

[@DIYwithMichaelBorders]

Thanks for watching Michael, definitely sounds like a so-close-to-completely-failing-starter. Looking forward to hearing back from you after you replace it.

[@michelle-yt7qr]

Thank you!! I’m going to try to fix this in my vehicle. Took broke to take it to a mechanic, I think I can do it!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. You can do this! We are here to help answer questions before, during, and after your project. 😎👍

[@noobhacker101]

OMG never knew that was the starter. Strange placement and I'm used to starters much bigger and looking different. 😁👍

[@DIYwithMichaelBorders]

Good morning & welcome to the DIY Raptor Club. We appreciate you watching. Pretty conveniently positioned for a DIY’er. Keep us posted on your project.

[@emprendedorlatino685]

I'm going to remove and replace the starter, 😊 only thing you need to remove is what is in front of the starter which is the filter housing.

[@DIYwithMichaelBorders]

Awesome, thanks for watching. Looking forward to hearing back from you on how your DIY project goes.

[@zeremiharmstead7829]

You Are The Best!! I Truly Appreciate You For Your Support! God Bless You Sir! ❤

[@DIYwithMichaelBorders]

You are very welcome & we appreciate you reaching out to us. We love reading comments like yours. Let us know if you have any questions. 😎👍🔧🔩

[@awos6559]

Question. Does this car also have a high rev after the battery is disconnected, so that it needs resetting? I’ve seen a couple of videos where they say this happens so that the car needs to “relearn” to idle?! Seems here you didn’t have to relearn to idle. I have a 92 Camry I bought and replaced the battery with a new one and was wondering if this is the case on it. Or perhaps it’s an IAC issue. It seems to have a starter issue, so I can’t even try to do the relearn cause it starts intermittently, I have to try it like 10 times.

[@chrisbigelow2475]

Does the bracket that is connected to the bottom bolt on the back of the starter need to be put back as well ?

[@DIYwithMichaelBorders]

Thanks for watching & we recommend reinstalling parts as they were prior to the replacement. With the new starter of course. 😎👍

[@dilonprice3648]

What year is this Camry? Mines a 91 and this looks very close to that

[@DIYwithMichaelBorders]

Good morning Dilon, we are drinking our morning coffee answering any and all questions for the DIY community. This is a 1999 Camry. Awesome job making it a DIY project if that’s the route you take. It will definitely give you that feel-good feeling. Enjoy your Friday and upcoming weekend, thanks again. Hey if you’re into crypto trading, we just launched our new crypto platform website. Toolboxtoken.com We DIYers need to stick together! 🧰

[@JoseRamos-fe9jl]

Your the best, step by step, I got the job done...

[@DIYwithMichaelBorders]

Jose Ramos Awesome Awesome, we appreciate you sharing. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@chuckarelei]

nice and clear explanation. excellent.

[@DIYwithMichaelBorders]

Thank you, we appreciate that! Thanks for watching.

[@paullangelier9188]

Extremely helpful, thanks so much.

[@PoucaAsa]

Awesome job. Much better explanation than other guy! 🙂 Thank you! Now cross your fingers for me!

[@DIYwithMichaelBorders]

PoucaAsa Thanks for watching. So happy to help. Us fellow DIY’ers need to stick together. Many more helpful videos to come. 😀 Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@privas8751]

Hi! What did a bad starter sound like ? I have same car but no check engine lights and think it may be this..

[@DIYwithMichaelBorders]

Thanks for watching, battery was supplying electrical power to the starter however when key was turned, starter would click once and that was it. We tested battery and it was full charge which lead us to replacing the starter. 😎👍

[@jenuinejoneszenproductions8355]

That’s what I say about it! Best engine bay EVER!

[@DIYwithMichaelBorders]

Hey thanks for watching. Definitely makes it more friendly to work on.

[@joshuacabral9681]

How many watts does the new starter have?

[@Garciabuilds96x]

Awesome video man straight forward !

[@DIYwithMichaelBorders]

@@Garciabuilds96x We are honored to help. 😎👍🧰

[@randyjenns]

Thank you! Very helpful.

[@DIYwithMichaelBorders]

We are happy to help, thank you.

[@CarrlosCastaneda]

Thanks bro, great video. I think the starter is my problem. I gotta order one now.

[@DIYwithMichaelBorders]

Carlos C What’s up Carlos, thanks for watching. Keep us posted on your project! Let us know if you have any questions. Us fellow DIY’ers need to stick together. Many more helpful videos to come’ Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@PanamaSticks]

Did you ever think of cleaning those battery posts?

[@dattexasboi_3697]

Great video only thing I wanna say it never set a battery on concrete or the ground it will drain the battery 🔋 👍just a tip always set it in a chair or something

[@DIYwithMichaelBorders]

Thanks for watching & sharing your thoughts. Any & all helpful info is greatly appreciated.

[@isaacpowell4033]

what is the electrical connection point at 4:35? i’m replacing my starter and i see that it has snapped

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. What’s your update? This is the electrical wiring that feeds power to the starter. Please keep us posted on your project.

[@coilsoflove2012]

Hello thank you for this video. What size socket wrench (U.S.) would be best for this?

[@DIYwithMichaelBorders]

Coils of Love Very cool & we are happy to help. Thanks for watching. A standard socket set will do good. You can purchase a socket set from your local AutoZone. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@AbriannaDAndrea-nj8ly]

I couldnt get to the nut for the life of me and i cant get the starter bolts out. Can you recommend how to get the 14mm bolts off if they wont budge?

[@DIYwithMichaelBorders]

Good morning ☕️ any update? You may need to use a larger ratchet and extension to get better leverage and a better position when loosening nut. You may also need to spray nut and bolts with PBlaster to weaken rust or corrosion buildup. Please keep us posted. Looking forward to 2024, many more helpful videos to come. 🧰

[@fredkilner2299]

May only need to replace the Solenoid if it is going CLICK CLICK with no motor spin and battery runs headlights on high fine. In a 1981 Toyota pickup I repaired a Solenoid. There are two copper metal contacts a conductive thing presses against when the Solenoid is activated. One of them was mostly worn away and the other was like new. So I put the like new one soldered to where the mostly worn out one was and made a new copper contact with metal from a water pipe and it worked fine after that. Original solder was very high temperature so I had to cut it.

[@DIYwithMichaelBorders]

Thanks for watching & sharing your experience. Sounds like you’ve been busy & learning a lot. Hope all is well. Enjoy your night Fred. 😎👍🔧🔩

[@fredkilner2299]

Just took mine out. That was really easy. Didn't see any need to unscrew the cruise control actuator thing. There were two or three things from the air filter plastic case which clipped around it's cable but they just pushed off easy. Copper contacts in Solenoid looking mostly gone at least one of them. I will replace those. May the force be with you!

[@Tlee29]

You rock brother. Thank you for the thorough video!

[@DIYwithMichaelBorders]

What’s up Thomas, thanks for watching & sharing this. You Rock too! 😎👍 We are always here to help answer questions, us DIY’ers need to stick together! Hope all is well with you and your family. Enjoy your week.

[@germanywho]

good job bro god bless u and family👍👍👍👍👍

[@DIYwithMichaelBorders]

Right back at you & we appreciate you watching. Hope all is well. 😎👍🔧🔩

[@brandonTHEshiados]

Great video. You're the best. Gonna do mine this weekend.

[@DIYwithMichaelBorders]

We appreciate you sharing this & welcome to the DIY Raptor Club. Keep us posted on your project as you work through it. 😎👍

[@crystall8407]

Thank you for the video as of 3/14/2021 I just put my first starter and saved two hundred bucks I will like and sub...

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Saving $200.00 is great & can be spent on something more meaningful. Hope all is well, enjoy your night. 😎👍🔧🔩

[@Sportsfan88820]

I have a 98 Camry with 230,000 miles. Every time I want to start it, I have to tap the starter with a small hammer and then it starts right up. I’m guessing I’ll have to replace it, but do you know if the starter can just be repaired instead of replaced?

[@DIYwithMichaelBorders]

Thanks for watching and we appreciate you sharing this. That is a definite indication that your starter needs to be replaced. Most will find that it’s more time saving and cost friendly to replace the starter all together as opposed to rebuild it. Keep us posted.

[@Sportsfan88820]

@@DIYwithMichaelBorders I ended up replacing it. My car isn't set up *exactly* the same as the one in this video, but it was still more than close enough. This video was EXTREMELY helpful in getting the job done. Now it starts with no issue at all. Thanks!

[@DIYwithMichaelBorders]

@@Sportsfan88820 Awesome job!!!!! The rewarding feeling that comes with a successful DIY project is a great thing. We appreciate you taking the time to share your update Ben. 😎👍

[@willampyle778]

Hey man i got a 99 camry has the same setup v6 as urs im been trying to figure out all the hoses placements when i couple weaks ago they water going in to airbox i fixed that but the rest of them are still wrong help

[@DIYwithMichaelBorders]

Willam Pyle Thanks for watching & we appreciate you reaching out to us. We recommend inspecting all hoses to see if you can find any leaks, cracks, dry-rotting... Water shouldn’t be entering your air filter case. Keep us posted. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@PanamaSticks]

How much did you pay for a starter?

[@irish89055]

Mr. Rogers does auto mechanics.. actually, a great video..not sure you need to remove the cruise control actuator and I've seen some people get the starter out without removing the airbox or the battery..

[@DIYwithMichaelBorders]

Thanks for watching. 👍

[@sdranac]

I need your help. Most of the times my car starts normally, but once in a while, once in about 5 times, the stater is spinning and mashing a slippery noise and it doesn’t engage, And then when I try again, one or two times, it works! I have tried different starters, and they all do the same thing, and then I have ruled out the stater as a problem and I now suspect something else like a relay, the ignition switch or other, causing the starter not receiving enough power maybe once in a while to deploy completely the pignon gear of the bendix to engage the big gear by the flywheel to crank the motor properly. Can that starter slipping and slipping turning noise be caused by not enough power getting it, making it turn but not fast enough to push the pinion gear completely out once in a while and therefore not engaging? But if it was the cause, why would it engage the next time or second next time? I have ran out of explanations, causes, reasons and ways to fix it, please somebody, help me out, thanks so much!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your experience. Since you have ruled out the starter, let’s focus on other causes. It’s very possible that you have intermittent voltage coming out of your battery. If your battery is brand new, this is unlikely however if your battery is 5-10 years old, it’s more likely. By chance do you had any type of aftermarket electronics added to the electrical system since you have owned it? Examples would be: * New stereo system/speakers * New alarm system * New horn * New Aftermarket headlights or taillights These are just a few items that can cause spontaneous behavior within the electrical system if not installed 100% properly. These added items to the electrical system can possibly have loose connections or the wrong wiring installed. We recommend inspecting your starter relay and fuse inside your engine compartment in the fuse box. Any type of moisture, rust, or corrosion on the electrical leads can cause havoc to the electrical current. Please keep us posted, us DIY’ers need to stick together. 😎👍

[@Dyoung-86]

Thanks for the video I just changed mine out no problem

[@DIYwithMichaelBorders]

Awesome, thanks for sharing this. Great to hear you had no issues.

[@lavishedgaming2140]

Which starter did u purchase

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We purchased a remanufactured starter from AutoZone. Still performing great today. 😎👍 What year, make, model is your Toyota, we can help you find a replacement Starter if you’d like. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@DJKeefe]

Where did you get the starter from and how much did it cost ?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. You can purchase the replacement starter from your local Chevy dealership or AutoZone. Both the dealership and AutoZone will require you to return the core. Keep us posted on your project, us fellow DIY’ers need to stick together! Enjoy your night. 😎👍🔧🔩

[@gunshotblazer]

long story but I had to change the wire that connects from the starter to the battery but I bought one that was prob a foot to long kinda tucked it in under the filter will there be any chance of it melting it is not making contact with the engine kinda just floating in there im wondering if I should just strap it to filter or is a 4 gauge wire fine to withstand whatever heat is down there

[@DIYwithMichaelBorders]

gunshotblazer Thanks for watching. Most importantly, you will want to keep your wiring away from hot portions of the engine. Some people use plastic tie straps to secure wiring. Keep us posted on your project. 😎👍🔧🔩

[@gunshotblazer]

thanks for the reply I replaced the starter and after I got a check engine and the code p0171 im wondering what could be causing the code wonder if I need a new MAF sensor @@DIYwithMichaelBorders​

[@DIYwithMichaelBorders]

gunshotblazer Great question & it’s possible. That is a great place to start as it is a very cost & DIY friendly repair. Keep us posted.

[@lylewhetstone8396]

Thank you. You're video was very helpful.

[@DIYwithMichaelBorders]

You are very welcome, we appreciate you reaching out to us Lyle. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@COFFEE-e3p]

thank you brother !!

[@DIYwithMichaelBorders]

@@COFFEE-e3p You are welcome. 👍🧰

[@alirazmjou2149]

Thank you so much for this video متشکرم

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching. Hope all is well. 😎👍🔧🔩

[@goldfish02rex]

Great video ,man. Very much to the point.

[@DIYwithMichaelBorders]

goldfish02rex Awesome & we really appreciate you reaching out to us. 😀 Definitely let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@roadway2peace]

good video. learnt something today

[@DIYwithMichaelBorders]

Hey, thanks for watching. Learning something new each day is a great thing. Hope all is well with you and your family.

[@markmnorcal]

Hi. I'm trying to put the starter bolts back in but I messed up taking one side off by trying to loosen the bolt the wrong way and now I cant get the bolt in easily. I think I stripped something and I dont want to force it. What do you think?

[@DIYwithMichaelBorders]

Thanks for watching & what’s your update? It’s very important not to cross-thread the bolt while you’re reinserting it & securing it. Keep us posted. 😎👍🔧🔩

[@markmnorcal]

@@DIYwithMichaelBorders I got it. I tried it without the motor and I got the bolt to thread on easily. I just had to get the angle perfect. Thanks

[@DIYwithMichaelBorders]

@@markmnorcal Awesome Awesome that’s a great update. We appreciate you sharing. Enjoy your day. 😎👍🔧🔩

[@MG38601]

It would help to update the year of the vehicle in the description.

[@DIYwithMichaelBorders]

Thanks for watching & sharing your thoughts. Let us know if you have any questions, us DIYers need to stick together!!! Hope all is well with you and your family. 👍

[@livewithinyourmeans]

Michael. You did a good job explaining. My channel is to teach people to save money. I hope to do videos like you have. Thanks.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. That’s our goal. Us fellow DIY’ers need to stick together! We just subscribed to your channel so we can keep up to date with you. Hope all is well, enjoy your day. 😎👍

[@elena_ifeoma]

Does it work for a 2003 toyota camey?

[@DIYwithMichaelBorders]

Elena_Sunny Sunny Thanks for watching. We recommend going to eBay. You can search for this starter and eBay will have you enter in your make model and year to verify it is compatible for your specific vehicle. It is very user-friendly and awesome. Keep us posted on your project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@michelle-yt7qr]

I changed the starter and when I put the battery back in it was starting to spark. Do you think I put the starter in wrong??

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. What exactly was sparking, was it the starter itself or the battery? If it’s the starter, you may have the wiring connections reversed and if it’s the battery, you will want to ensure that you put the red cable on the positive lead & the black cable on the negatively lead.

[@michelle-yt7qr]

@@DIYwithMichaelBorders a washer from the new starter fell off before I screwed it in. I had to take everything out and retrace everything. Now everything works perfectly! Thank you 😄

[@DIYwithMichaelBorders]

@@michelle-yt7qr Awesome job & that’s great to hear. A rewarding feeling indeed. Hopefully many stress free days ahead for you michelle.

[@hughkoontz2166]

Battery terminals need some cleaning. Good video

[@DIYwithMichaelBorders]

Hugh Koontz True, thanks for sharing. We appreciate you watching. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩

[@coreyglatfelter3058]

This was really nice. My 2005 is different. Must be engine size? Anyway great video.

[@DIYwithMichaelBorders]

Corey Glatfelter Thanks for watching & sharing your comment Corey. We are happy to hear the video helped. Let us know if you have any questions as you work through your DIY project. Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@folakea7361]

Yeah I have 2005 Toyota Camry too and my starter just went out today

[@user-hr2yd5qi2w]

Great video

[@DIYwithMichaelBorders]

Hey, thank you. We appreciate you watching J, hope all is well. 😎👍🔧🔩

[@joesmith6524]

Yea easy on the earlier years like most cars,the newer ones are a nightmare!

[@DIYwithMichaelBorders]

Thanks for watching, older cars are definitely a bit more friendly to work on. 😁👍🧰

[@joewhatsup]

Come on man, thanks a lot, great vídeo!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your thoughts. Hope all is well. Let us know if you have any questions, enjoy your day. 😎👍🔧🔩

[@LuisSanchez-dy5vl]

THIS WAS AMAZING

[@DIYwithMichaelBorders]

We are honored to read this, thank you. 😁👍🧰

[@darrylwright4641]

Great job

[@DIYwithMichaelBorders]

Thanks Darryl, we appreciate you watching. Let us know if you have any questions. 😎👍🔧🔩

[@beohoh]

You sir, are a God.

[@DIYwithMichaelBorders]

Thanks, happy to read this. Feedback is greatly appreciated here. 😎👍

[@malcolmpurnell3905]

Awesome example, my kind sir.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you sharing this. Us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you. Enjoy your day. 😎👍🔧🔩

[@christoperthomas5523]

Thank you

[@DIYwithMichaelBorders]

You are very welcome Christopher. Hope all is well & thanks for watching. Enjoy your day. 😎👍🔧🔩

[@DrSagaciousone]

Thank you! Great job@

[@abr.magallon2134]

I have a 1998 camry i notice sometimes when key is turn to start my car no noise or crank. After second or third time turning key is turn my car fires right up. I have to repeat same proces every time i turn off my car. Can this be the stater. Thanks

[@DIYwithMichaelBorders]

Ab R.Magallon Thanks for watching & sharing your question. Your symptoms are exactly what will happen when your Starter is failing. It will work sometimes & then all of a sudden...it will stop working forever. 😲 Replacing your Starter will fix your intermittent starting symptoms. Keep us posted on your DIY project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jessemorales7264]

Thanks a was really wonderful help

[@DIYwithMichaelBorders]

We appreciate that & thanks for watching Jesse. Sounds like you’re back up and running. Let us know if you have any questions. Enjoy your night. 😎👍🔧🔩

[@michelmillette9218]

Very good vidéo! Thanks...

[@DIYwithMichaelBorders]

We appreciate that Mike, hope all is well. Thanks for watching. 😎👍🔧🔩

[@turtleman6281]

Thanks bro that was helpful

[@DIYwithMichaelBorders]

Alberto aka Turtleman Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩