How to Replace Steering Angle Sensor 05-10 Chrysler 300

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@beardsbucks2365]

How much I need one for a 2005C

[@skylerkohen6957]

Sorry to be offtopic but does anybody know of a tool to get back into an Instagram account? I was stupid forgot my password. I would appreciate any assistance you can give me.

[@sat_sonic]

Hands down the best steering angle sensor / clockspring replacement videos. Thanks!

[@DK-tl1cr]

Best professional mechanic that i have ever seen on you tube.

[@1AAuto]

+D K Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@chrismoody4594]

This is exactly the same for 2010 Challenger R/T. This video is spot on and saved me about $450. Thank you!

[@1AAuto]

+Chris Moody Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@cristianrodriguez8556]

@@1AAuto I have 3 lights on the abs, esp and the traction control lights on the panel. Will the steering wheel sensor erase all the lights? My car is an 07 Chrysler 300c awd hemi.

[@rockybutler]

Very good video, comes with a few tricks of the trade. along with electric connection remove instructions. most videos don’t show this level of details.

[@AvinashSharma-wc2yn]

Can you please tell me if the same procedure will work on dodge durango 2013 citadel model?

[@1AAuto]

+Avinash Sharma We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@noelwellstead8744]

Why did you not address the problem of re fitting the steering wheel back on the spline, you obviously encountered it but cut that part out and now I have the same problem and do not know how to fix it . Thanks 2B Auto

[@md11hud]

Excellent video. I just followed along to replace the SAS in my 2009 Challenger. Thank you.

[@codyfordyce7357]

You need to include the t30 driver in the tool list

[@mikevrino]

Is there a reset or relearn procedure that needs to be done after the installation of the sensor? Or is it ready to go after reconnecting the battery ? I appreciate your time. Thanks again!

[@lololucero1]

Can you tell me the issues you would have that would require you to need to do this part replacement? What warning lights and car performance issues would you be experiencing? Thank you

[@JoeySkoots27]

The esp bas light

[@jeremybeverly7913]

Doesn't the SAS need to be calibrated after installation?

[@faisan162]

thanks for the video, a very practical and easy to follow tutorial

[@elifire4147]

Followed your link in description and cant find the part. Steering Angle Sensor 2008 Charger.

[@scatsam7566]

I replaced my steering angle sensor and my esp Bas light is still on? I had it scanned before I changed it and it said steering angle sensor. Any suggestions what I should do?

[@chickenhawkchickensanderss1239]

Would this cause Code c121 A? And also having this code would it disable the remote start? Or does it just need to calibrated by a scan tool?

[@chickenhawkchickensanderss1239]

U guys around?

[@Srt8Driver]

hi. did you fix the code with steering angle sensor ?

[@jhonphil2177]

do you know where to apply the grease that comes with it?

[@lexdrewthorgaming]

What does the white connector on the clock spring control?

[@wingersoncaquias5163]

What DTC appear in the pcm to dignostic the steering angle sensor ? Thanks

[@KyleGreenhow]

do you need to calibrate the new angle sensor after putting it back together?

[@lunnonsears7577]

do I need to get a calibration after replacing sas

[@SkoobyDoo420]

2005 Dodge Magnum ...ABS light, BAS light and traction light on....my turn signals do not disengage after turning plus horn not working....I replaced all four abs speed sensors first... haven't went further than that yet....heard clock spring could be the culprit and SAS sensor too....seems to me both probably need to be replaced....and suggestions or help if u know what the problem is. Thanks

[@1AAuto]

+SkoobyDoo420 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@SkoobyDoo420]

@@1AAuto I went ahead and disassembled ...its the clockspring from what I see...4 of the teeth in the center circle part of the clock spring were broken off.

[@gyver471]

Is it all set after you finish is there a reset you have to do?

[@adamtrombino106]

I wanted to know that as well. On GMs there is a relearn procedure...Chrysler?

[@mr.sinister1279]

Why didn’t the steering wheel lock?

[@dominickgovernali3152]

Great video I just change my clock spring and ABS light and traction light are still on and my horn does not work any suggestions please thank you

[@ricardocampos2697]

would this be the same procedure for a 2007 Jeep Laredo?

[@MrMar1000]

I believe so I have 08 laredo Gm brand similar

[@patriotproportioners7364]

Would this sensor cause the ABS traction control & ESP BAS lights to come on ?

[@1AAuto]

+Miles Bentley It is possible. Thanks for checking us out!

[@PickleballBrand]

Really good instructional video

[@choloivan8334]

You guys don’t sell them anymore?

[@MrTitans83]

Would that sensor cause my traction light to be on

[@WisconsinMoparEnthusiasts]

yes

[@Chrispy100]

Would it cause my blinkers or cruise control not to work

[@sat_sonic]

Crispy Curve - likely not. Check your battery

[@jaimem4362]

PROFESSIONAL!!!

[@dangerousfreedom4965]

How difficult is this on a 2005 Jeep Grand Cherokee?

[@Dragonesa41083]

I have the same question as you except I have a 2008 Jeep Grand Cherokee.

[@thadonofdetroit7679]

Would that sensor be in the same location on a 2009 Pontiac G6?

[@1AAuto]

+Donald Walker If the vehicle is equipped with one it might be a different process to repair it. 1aauto.com

[@robertocarlosarechiga6435]

Can you put some info about the pacífica 2007 4.0 please

[@BdeJJG]

Will this work with 2011 model?

[@trillvinci-raazul-negasi1115]

U forgot the t30 torq screw driver in tools needed but good video

[@Revrev-i6q]

How long does it take to complete

[@secretsquirreladventures7778]

100% satisfaction guarantee with a 30 day timeline…great videos but trash parts

[@everardocamacho5063]

Great video guy,

[@1AAuto]

+Everardo Camacho Thanks for checking us out! 1AAuto.com

[@shermanmarshall2544]

Thank you

[@dermet12]

I have this problem and code said speed sensor cables so i replaced them but lights stayed on and code reader still saying speed sensors🤷‍♂️?

[@1AAuto]

+demmy01 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@pono321]

I have ABS light, traction control light and Bas light 3 total...? Anyone else with this problem 06 Chrysler 300 ??No check engine light either. Just got an alignment done and lights still on, Tire shop said the rear tires could not be aligned and that's why all those lights on. Is that true!??? I don't know what else could be wrong.

[@darickymeister]

I have a 2009 Chrysler 300....I replaced the clockspring... problems went away...the lights always came on when turning left.

[@Dragonesa41083]

@@darickymeister, same problem here except they come on when turning to the right. So when you replaced the ClockSpring did it fix the issue with those lights?

[@evelynlopez669]

HI GUY HOPE U CAN POST THIS CAUSE I AM COMPUTER CHALLENGED. 2009 CHALLENGER MANUAL TRANS. ESP BAS LIGHT CAME ON WHEN TIRE CAME OFF CURB OUT OF GAS STATION RAMP N TIRE SPUN.ESP (ELECTRONIC STABILITY CONTROL)BAS(BRAKE ASSIST PROGRAM) I DID ALL THE TRICKS ON U TUBE. SPIN WHEEL ALL THE WAY TO RIGHT THEN TO LEFT. TURNED LIGHT OFF TEMPORALLY. TURNED CAR OFF WHILE IN NUTRAL WHILE GOING 20 MPH N RESTARTING IT. TURNED LIGHT OFF TEMPORALLY. LOOKED INTO STEERING ANGLE SENSOR N FOUND THAT IF THIS HAPPENS TO U , IT SHOULD RESET ITSELF AFTER ABOUT 100 MILES OF DRIVING OR SO.IF NOT,THERE ARE CODE READER DEVICES THAT HAVE SAS ON THEM. THIS RESETS YOUR STEERING ANGLE SENSOR. DO THIS BEFORE CHANGING IT.ALSO WHEN U DO CHANGE IT IT SHOULD BE RESET TO CENTER.

[@madpeddler8263]

easier to simply disconnect the ground from the body in the trunk.

[@jaygames1980]

Is the guy in the ad the owner

[@arnon-jaya]

thanks