How To Replace The Battery a Rado Diastar Ceramic Watch | SolimBD

[@jjp6975]

Merci beaucoup .. Super ! J'ai la "Rado" de ma maman (1985 ???) ? Jacques.

[@SolimBD]

Thanks

[@360VideoNetwork]

For anyone who needs to change their battery - I purchased a Renata 315 (also known as an SR716SW). I purchased a Beco Technic 7 piece watchmaker screwdriver set for £35 which I would recommend. I used the grey screwdriver which is 1.4mm. Don’t use cheap screwdrivers as they are not precise enough to fit and will just damage the screws. The Beco 1.4mm worked well for me. I also used plastic gloves and a carbon fibre watchmaker tweezer to avoid shorting the battery and getting skin oil on or inside the watch. It was awkward to get the battery in. I slid it under the two gold battery clips and I then pushed down gently on the other side. It didn’t go all the way in (and I was worried about applying to much force and snapping something), but when I screwed the back down, it seemed to push it into place. I didn’t remove the strap and didn’t find this a major inconvenience if you position the narrow strap extender piece over where you are working rather than the ceramic strap, but the curved face is awkward and I was careful not to push down on the watch too hard in case it put too much pressure on the glass face.Not sure that this is the right way to do it, but it worked for me. Proceed at your own risk. Good luck.

[@SolimBD]

Thanks for longer comments

[@360VideoNetwork]

Thanks for the helpful video. I think watchmaker screwdrivers come in various sizes - 0.8mm, 1mm, 1.2mm, 1.4mm etc. Do you know which one this watch needs?

[@SolimBD]

All sizes needed

[@hc2865]

Thanks for the tutotial. What size screwdriver dit you use?

[@SolimBD]

Search online "Watchmaker screwdriver " thanks for comments

[@wenmil05]

What was the item used on the gasket before putting it back in

[@SolimBD]

silicone grease

[@wenmil05]

@@SolimBD thank you

[@zosothezephead837]

Lol glad I read that, I was about to drag a blu-tac ball around the edges 😂

[@jeffomspaugh6691]

What size battery does it take so I can have it on hand before I open it?

[@SolimBD]

The battery size is SR716SW

[@riefahmad6660]

what type of movement is this?

[@SolimBD]

ETA256.111

[@rosadatep1728]

When you install new buttery do you have to change anew seal too

[@alexscacashipa]

???? i would like to know too please

[@hc2865]

Thanks for the reply. What size did you use ?

[@SolimBD]

Normal Watchmaker screwdriver

[@Dondaddyh]

Job done👍

[@davidjunior5773]

My watch looks exactly like this one however no screws on the back. How do I get to the battery? I must have a newer model

[@SolimBD]

Don't try DIY; replace the battery at an authorized service center.

[@gogosnah]

does anybody know what type of battery fits in my rado diastar 963.0409.3? Many thanks~

[@SolimBD]

It cannot be said without opening the back cover

[@siliconsugu]

Super. Hat's off to you

[@mdsoiyodabuhanifsohag2835]

You have to like this watch I need one watch send

[@SolimBD]

where is your location

[@SanthoshKumar-wd2vh]

Price

[@SolimBD]

1000 to 1500

[@AC-en2oz]

Sorry pls don't mind but earlier background music was soothing unlike the present one. But as always another well learning video

[@Sickone1029]

I need to get to my face my little diamonds fell off from a fight I had

[@Sickone1029]

How can I get to the face