Good video. If I may. I personally would not even take off the flex cables connecting the screen to the motherboard. I have a tool that holds up the existing screen at a 90-degree angle. On one end is a spring-loaded set of jaws to grip the lower end of the screen and the other end fits into the charging port. The tool can be posed so as to keep the screen up at the desired angle. Once I do that, I can use a set of tweezers to slowly peel off the glue strips at the charging port end of the battery, basically spinning the stretchy onto the end of the tweezers. Once you get the battery hold-down adhesive strips removed, you can replace them with new ones that come with a battery kit. Before inserting your new battery adhesive strips, connect your new battery to the motherboard so as to get the right fit before you mount the new battery. I install the new battery tape onto the battery just like they were when you opened up the phone. Then it is simply attaching the battery flex cable to the motherboard. Test by turning on your phone. After testing on/off function, install your new double-faced adhesive frame strip all along the perimeter of your phone pressing into place with the pointed end of a plastic spudger. Once you have done that, remove the translucent tape backing. Close your phone, replace the screws on both sides of the charging port and you're done!
@TG-nh9jx5 жыл бұрын
Is this guy a hot plate salesmen?
@davidgsanchezc53635 жыл бұрын
Hi, afer this process is done, do you have the battery healt data restored, I mean, do you have battery Health at 100% agin ???
@deronsworld53842 жыл бұрын
Did you get the battery health to show after you change the battery?
@bumingdeath5 жыл бұрын
If you have the effort to replace that battery. Why you just dont replace the new adhesive strips and the screen seal? Otherwise its a good tutorial.
@CH-pv2rz3 жыл бұрын
Yes he should have simply peeled back the adhesive strips when he wanted to remove the old battery and then used new ones to install the new battery...
@jakubmazanek97455 жыл бұрын
nice job
@kasebuchanan48904 жыл бұрын
All you have to do is pull the adhesive strips if your gonna replace the strips
@Figjamxlaststar5 жыл бұрын
Should start a drinking game, take a shot every time he says hot plate!
@martinmck5053 жыл бұрын
Ha ha ha ha ha 😂
@Andreaskep6 жыл бұрын
Not waterproof anymore
@saeoce47945 жыл бұрын
andreas stavrou resistant*
@joanneazeez99383 жыл бұрын
Think it only stays waterproof if apple Replace the battery if you Do it yourself it won’t be waterproof anymore