How to replace the blades on Wahl clippers #wahl #wahlclippers #clippers #bladereplacement #fullsend
Пікірлер: 85
@user-wz4vd4zk9c24 күн бұрын
Thank you! Couldn't have done it without your quality video
@maxmusclem24 күн бұрын
@@user-wz4vd4zk9c thanks for watching
@cocoemrick1903 Жыл бұрын
It came apart very easily, reassembled, not so much. Your tutorial saved me from buying a new clipper!
@iz-is2502 Жыл бұрын
Thnx this saved my butt. I lied to my barber told him I knew how to put the clippers back together for a free haircut lol.
@LandonTristenАй бұрын
You just saved me $40 thinking my clippers went bad but the whole time the spring just got loose. Thanks so much man
@maxmusclemАй бұрын
Thanks for watching
@JL-il6vk Жыл бұрын
Thank you for making this tutorial! Helped me a great deal when the spring popped and I didn’t know which way to put that bottom blade back in.
@maxmusclem Жыл бұрын
Thanks for watching
@markbahouth2713 Жыл бұрын
thanks Max. the WAHL user guide never explained how to disassemble and most importantly how to REASSEMBLE the blades. you did a good job and it was a good thing you kept the original screws or you might of been SCREWED. P.S. the replacement kit might of been more expensive than buying a new clipper. excellent DIY video . thank you.
@maxmusclem Жыл бұрын
@@markbahouth2713 Thanks
@robinrobijns121511 ай бұрын
Omg.. that spring.. it drove me insane for a couple of times😂
@maxmusclem11 ай бұрын
@@robinrobijns1215 I know it’s a real pain
@angelabell5087Ай бұрын
I had to buy clippers because Alopecia took my hair out. It took me over two hours trying to figure this out until I came across your video. Thank you so much!
@maxmusclemАй бұрын
Glad it helped
@phyllisjohnson29147 ай бұрын
Thanks for the tutorial. It helped me tremendously. I never would have replaced the blade without your help.
@maxmusclem7 ай бұрын
Awesome . Thanks for watching
@jobrown8146 Жыл бұрын
Thank you very much. Very clear images and instructions. My clippers are the Wahl Color Coded ones (bought during the pandemic because in Australia the hairdressers were closed) and when I put it back together it seemed that I didn't have to adjust them at all. One thing that I didn't realise is that the lever at the side is an adjuster for the blade closeness. I've had issues shaving the left side above my ear and usually go too close (I'm right handed), so changing the closeness might solve that issue.
@rrobles9453Ай бұрын
Thank you for this video! 🙌
@craigladeroot6424 ай бұрын
Thanks for making this video. I know how to change the blades now.
@deelord2854 Жыл бұрын
Thank you I took apart my razors to cut my own hair and I watch several videos and you help me I appreciate this video
@maxmusclem Жыл бұрын
Thanks for watching
@janerobin40604 ай бұрын
Nicely done! It was taking me forever to align my new blades
@nkhensanisimango48882 жыл бұрын
Only video I could find that helped me
@JL-il6vk Жыл бұрын
Same here. The wahl video wasn’t as good.
@Evan........4 ай бұрын
Right he actually also started from the beginning when the blades weren't even uncrowded yet other people post KZbin videos with the clippers already taken apart and that's just useless so I think I'm just subscribe to this channel since this is my first time seeing this video and channel
@verily3607 ай бұрын
Thanks saved my life even though mine was a mini clipper this helped me to reassemle!
@TjitjikutuaraMbazuvara3 ай бұрын
Thanks this helped me alot
@maxmusclem3 ай бұрын
Thanks for watching
@user-th1bb6ri7b Жыл бұрын
Thank you for posting this. I was struggling to put mine back together.
@amandafrost938310 ай бұрын
Thank you! I was going crazy trying to figure it out.
@curtissheppard19967 ай бұрын
Thank you thank you thank you. Having this trouble just now. Excellent video man.
@maxmusclem7 ай бұрын
Thanks for watching
@killuminatimaccabee811 Жыл бұрын
Preciate it fam. I reassembled my clippers in no time thanks to you.
@maxmusclem Жыл бұрын
Thanks
@tonysolino3131 Жыл бұрын
Thanks. This was exactly what I needed.
@sheargr8ness208 Жыл бұрын
I literally had to go dig through my trash for that little plastic peace 😅 THANK YOU
@SUZY552 жыл бұрын
Fantastic tutorial! I have really, really struggled with this - now I finally know the right way to do it!
@BRoxane1 Жыл бұрын
I agree! I couldn't find the plastic piece. It was still stuck to my clippers! Now if I can only find a replacement blade for my set. Went to the Wahl site and they have not been available for months. Thank you for the video!! Bless up! ^i^
@myalaynaangel Жыл бұрын
Thanks so much for showing what side the bottom goes on. I knew it was supposed to go a certain way and could not figure it out
@user-wc4zu4pt1sАй бұрын
Thank you!!
@jamesmcrory3419 Жыл бұрын
Love Roxy music :) Bryan ferry
@jaytmartinez Жыл бұрын
Very helpful; thank you.
@maxmusclem Жыл бұрын
Thanks for watching
@goldeneagle994 ай бұрын
Amen brother!
@brendakreuzer94985 ай бұрын
Thank you so much!
@maxmusclem5 ай бұрын
Thanks for watching
@unwrangler113 ай бұрын
Thanks!
@user-cn5tv9fg2m8 ай бұрын
Thanks for the video.! ❤
@alpha_echo7 ай бұрын
this video saved me, thank you!!!
@maxmusclem7 ай бұрын
Thanks for watching
@jamesprice6381 Жыл бұрын
LUBE the plates! :)
@maxmusclem Жыл бұрын
Yes the blades were lubed . Thanks
@meldavis28606 ай бұрын
Thx!!!
@kandeywilson5264 Жыл бұрын
Thank you so very much.
@maxmusclem Жыл бұрын
Thanks for watching
@Evan........4 ай бұрын
How can we 0 gap the clippers if I'm not able to? I think I'm going to get a bigger and different blade probably use the same screws like you just did and I'm going to need the cutting blade still blade and the gray metal part that had the holes 🕳 for the screws to go into to be able to 0 gap? Is that possible with the clippers that i have?
@maxmusclem4 ай бұрын
I just push the blades as close together as possible and tighten screws
@meg2115 Жыл бұрын
I use Wahl Pros for my dog and really needed new blades and no other tutorials explained the spring and I was so afraid to break it.
@maxmusclem Жыл бұрын
I hope this helped
@tagkiler41 Жыл бұрын
when i took off the screws i got a second spring out, how to and where to replace it please ?
@maxmusclem Жыл бұрын
At 3:40 you can see the 2 spring arms . Align to the 2 slots on the plastic piece attached to the blade . Are your clippers the same model ? I don’t recall any more springs except the 2 arms
@tagkiler41 Жыл бұрын
@@maxmusclem the blades are same, the look like U spring and ➿.
@maxmusclem Жыл бұрын
@@tagkiler41 I don’t remember seeing another spring
@tagkiler41 Жыл бұрын
@@maxmusclem sad for me, thanks and i wish you more success.
@funny573ff Жыл бұрын
Zero gap it in the process
@Eddie24255 ай бұрын
Do you, or anyone else know how to get the little plastic piece that’s inside the smaller blade? That part is worn out on mine. I need blades, but I also need that plastic piece as well. Also, anyone know what that piece is called? Any help would be greatly appreciated!
@maxmusclem5 ай бұрын
Look up wahl accessories on Amazon . They have parts
@Eddie24255 ай бұрын
Thank you for the reply! I looked up the parts, but I can’t find any plastic pieces that look like the one that came off of yours and mine. We have the exact same one.
@maxmusclem5 ай бұрын
@@Eddie2425 I’ve looked at every website for clipper parts . Can’t find that plastic piece anywhere .
@Eddie24255 ай бұрын
@@maxmusclem Thank you for looking! I’ve looked everywhere myself. I don’t understand why they seem to sell pretty much everything else except for that!? I feel like it should come with the blade set in my opinion. Mine has become so worn the clippers sound like a chainsaw now!
@maxmusclem5 ай бұрын
@@Eddie2425 They should have a full replacement kit . They do that so we have to buy new clippers
@ddhill61 Жыл бұрын
It took me forever to get them back together….but no that side lever won’t work. What am I doing wrong…. Bout to throw in the towel and buy new ones. They are less than 2 years old!
@maxmusclem Жыл бұрын
Try putting some oil between the blades . Maybe they are so dry they won’t slide . Also maybe the screws are too tight just back the screws out a tiny bit
@maxmusclem Жыл бұрын
Do the clippers seem to be working correct besides the slide not working ?
@ddhill61 Жыл бұрын
@@maxmusclem initially they wouldn’t even turn on, so took them apart and put back together, then they turn on but the lever on the side won’t work. I’ll try your previous suggestion to oil between before re-assembly. I know it’s me, terrible at these things. Tryin to save money by grooming my own dog, which I also learned how to do on youtube. Already had to buy a special screwdriver just to get the blade off; mine did not have a regular Philips….some fancy star thing
@maxmusclem Жыл бұрын
@@ddhill61 I know I saw the new screws not normal . I’m not handy at all but I just took my time and figured it out . Let me know . You’ll get it .
@ddhill61 Жыл бұрын
I’m throwing in the towel….i have tried and tried to get them back together and cannot. Another $60 to replace….ugh!!
@ao7837 ай бұрын
Ugh my wahl clippers are just slighly different and I cant find them anywhere else on YT and none of the ways you guys do this work on my clippers. Extremelyfkn frustrating