How to replace the boom on a Goosky S1

[@JakeBullit123]

Thanks.Just broke mine yesterday,so this will be very helpful when my parts arrive.

[@spockfpv]

Thank you for showing a tear down. You saved me loads of time.

[@michelpetrus]

Thank you for this video. Greatly appreciated.

[@kajuta240]

No matter how hard I try, I can never get that swash guide to snap into the notch. I tried to remove the boom and place it in, then as soon as I insert the boom, it pops out.I just learned to live with the gap. Thing still flies awesome.

[@simons6208]

Very helpful tutorial thanks .

[@digigarb]

If you don't have a new boom you can pull out the broken piece put a small hole in the leftover boom in the right place and just push it back in and put screw in. Have new booms coming but even with slightly shorter boom still flies just the same.

[@yakacm]

Yeah I thought that too, but I wasn't sure if it would still fly properly. TBH just the thought of having to do all this just to put the broken tail boom in, and then to have to do it all over again when the new boom arrives, nah, just going to wait till I get the new tail boom.

[@glenn4452]

I was thinking the same thing,too try and reuse the broken boom.

[@SujitMohanan]

What size Philips screw driver did you use / recommend for this repair?

[@hobotraveler4468]

What tools do I need to repair this heli?

[@yakacm]

I need to do mine too. A couple of things occurred to me looking at it. 1st you could probably take the broken bit of the boom out and just put the boom back in, OK it would be a few mm shorter, but still...Obviously I'm not being too serious here, as with the shorter boom it probably wouldn't fly right, and the tail rotor may end up hitting the main blades. Thew other thing that occurred to me, was whether it was necessary to unplug the tail motor from the flight computer, would it be possible to disconnect the tail motor at the tail end, like is it soldered?

[@andrewmammoliti2450]

how about a video for the front servo?? how to remove that one? tks

[@JJInvertedProduction]

Ok I’ll see what I can do. Why do you ask?

[@andrewmammoliti2450]

i need to change mine@@JJInvertedProduction

[@mirospool6992]

@@JJInvertedProduction Well, I don't want to answer for him, but I think he thinks that the servos are the biggest problem on this great heli, because I also looked into it. And here is another question if it is possible to use the servos from the OMP m1 evo because I think they are more affordable. E.g. in my country they are. Many parts for OMP but nothing for any goosky helis. And sorry for that but do you think the main blades from m1 evo can be used at S 1 ? Anyway, great video, thanks for the tutorial.

[@davidkredow1421]

Thanks for the video. Man those are really small screws.

[@JJInvertedProduction]

It’s like watch repair lol😊

[@johnwellons9239]

Ditto!

[@TheWeekendOperator-tz4cy]

I just did the exact same thing to mine… should have used cylindrical boom