HOW TO REPLACE THE CHANNEL FADER ON THE PIONEER DDJ SX2 (SX,SR) DJ CONTROLLER

[@hungchung2726]

You cant make any mistake inserting the fader as it can only go in one way. Thanks for the video still.

[@Cjthasticman]

My Man This Video is a big help. I am a tinkerer and yes i have the balls to do this but don't have the time. I gotta be back on the air TODAY so Im Breaking the Mixer and 1200's back out till i get a new controller. I'll Sell this one for cheap and put that money towards getting a new one!

[@FastestMobileDataSIM]

Thank dude been waiting for someone with balls to make a tutorial 👌

[@DJROCKCEEENTERTAINMENT]

Mickey C lol 😆 you said the balls 🏀 you welcome bro !!!

[@djstatyk1540]

This guy looks like every other DJ I know lmao I mean that with smiles on my face! 😂😂 Excellent tutorial. I scratch so much, my mixers never last

[@burnyabad]

thank you for this. I needed help with a ddj-sr2 i bought used and in need of all fader replacements and this showed me what I needed to do. Keep up the good work.

[@djnomnom2008]

Holy shit where were you a year ago when i wore down 2 of my volume faders. I was going to do it this summer without these instructions and praying that my electronics knowledge was good enough. If this repair goes through i'm definitely dropping in an innofader and putting this shelved controller back to work.

[@DJROCKCEEENTERTAINMENT]

DJ NOMNOM lol 😆 Thanh you bro !!

[@djtorresz9260]

Gracias hermano por gran video!! Saludos desde culiacan sinaloa 🫡

[@DjGurov]

Thanks, man. Great description. Ever tried to find the reason why ch fader goes down? In my case 2nd ch fader stopped to respond correctly from time to time, like I push the volume to the top, and in the highest position the fader in gui starts to go down slowly

[@TJJasso]

im having a similar problem, the physical 2nd channel fader is isnt responding, but nothing related to the app.

[@brettkaye5201]

Great video. Would have been good if the ribbon cables had been clearly shown to disconnect. Iv managed to pull the whole terminal away from the motherboard, as I didn't know how fragile they were. I hope it doesn't cost the earth to repair.

[@rodswanson1505]

DJ ROCK-CEE AKA DJ SURGEN YOU ARE THE MAN

[@DJROCKCEEENTERTAINMENT]

Rod Swanson lol 😂 thank you 🙏🏻

[@davidblaze2184]

Dj Rock-Cee I have a question, the knobs like Bass .. Mid...Hi....can they be sprayed out (serviced) it do they need to be replaced? My bass knob is shorting out, so I would like some advice?

[@AZTECHSOUL213]

Can you do this with the DDJ-SR2? when I try to buy the part, they tell me its only sold on a PCB for about $110.

[@iamdjmaze]

Dam, you really just went all in ! Awesome video. I feel I’d forget once you got down to the ribbons lol

[@TheDafunk909]

Hey DR ROCK-CEE, can I add lube on my channel faders from the top? I had put some DeoxIT cleaner and now it's supper gritty so need to add few drops of lube, but I don't want to disassemble the controller. THX!

[@rodrigocesar5848]

Hello Congratulations. a question. can either side put the channel's pitch and fader on either side? or do they have the right sides?

[@robertw.1499]

I am having an issue with my DDJ SX2. The music keeps on dropping out. When playing a track, the music stops for a split second and then carries on. The jog wheel doesn't stop, just a break in the music. Sometimes, the main output indicator doesn't even register a signal and I have no sound at all. I have checked all the usual stuff, including buying a high end USB A - USB B cable. Please advise 🙏

[@realo5905]

Thanks man......I was struggling with this, great video.

[@DJROCKCEEENTERTAINMENT]

thank you bro !!!

[@JustDJJoseph]

Sup Legend , hope u are well , need to know if the faders of the ddj sx and that of the sx2 are compatible to change??? Thxxx

[@geraldfer]

Great Job 👏🏿👏🏿👏🏿🏆🏆🏆🏆

[@ruddyrascon7282]

I could be able to replace some of the Faders on my ddj-sx thank to your video.......thanks a Lot man!!!!

[@DJROCKCEEENTERTAINMENT]

I’m glad my video was a help to you my brother !!!!!!

[@paulosilvestre635]

Can you make a tutorial explain how to replace a play and cue botton on ddj sx? Please?

[@JayxJay]

I have a traktor kontrol s2 mk3 I'm trying to replace the pitch fader. Do you have any idea where would I find the replacement fader? Thanks for any help! 🙏🏾

[@SILVAA951]

Do you have a video changing out the tempo faders for an SX ?

[@TheDafunk909]

Awesome tutorial man, you deserve more views

[@amthedjlaro]

Hey nececito ayuda Pana.. my cue n play on my deck don't Wana work any tips on that I have open the sx yesterday but dint see that the soder was mess up I only clean the surrounds back and front again bc maybe some one spill a drink there

[@kennydigital938]

what about the rotary knobs for the filter/ eq? are they as simple to replace?

[@DJROCKCEEENTERTAINMENT]

Kenny Hawthorne same process

[@tmXDumleee]

wow this is awesome! Thank you!

[@erashio6702]

Hi DJ ROCK-CEE ENTERTAINMENT I wonder if you can advise me I have tried to change my channel fader on my Numark mixtrack pro its basically similar procedure all went well until i tested it however it plays both ways ends up and down?Can you help or tell me what i'm doing incorrectly please.....its the correct channel fader your help would be most appreciated my friend.

[@jameskelleher2596]

This was awesome man thankyou, full mission but got it done!!

[@rootsnculture9729]

Would I hv to open it this same way if I wanted to clean the eq and fx knobs? Right now they're flickering on their own from dust and dirt.

[@anthonyjacob5539]

hey dj rock -cee do you know how to factory reset the pioneer ddj sx2 ?

[@stephaniefraser8574]

Ok so I need advice... See the pioneer ddj-1000, well on the mixer where the clear screen shows you what beat fx your using... Yeah that clear screen is broken.. and wondering if that's an easy fix. And what part would I need?

[@djluminol]

You need to be more specific. There are several models of 1000. Can you post a link from a retailer with your version? Or just download the (service) not user manual if you can find it. There should be somewhat detailed disassembly steps in there that will help you narrow down what part is bad or what you need to do. If you mean the digital display inside the jog wheels that is most likely a part within a part. On my DDJ-SX2 there is a central electrical display inside a larger housing. Part # 29 in this diagram. Upper left hand side. instrumentalparts.com/content/pdf/ddjsx2.pdf You need to find the ddj-1000 version of that picture, find your damaged part and replace it if it isn't caused by something else. Otherwise your just guessing and maybe it's that part maybe it isn't. At least find the parts diagram though. That should help.

[@stephaniefraser8574]

@@djluminol thank you for your reply it would be much easier of I could send a picture .. the manual for the ddj-1000 manualsfile.com/product/m4l3swnud.html and it's the mixer... Part number 10.. it's like the LCD screen on the mixer that shows what effect your using that's broken... I mean it still works and all but worried incase anything gets into the system.. 😭 it's the effect section display that's smashed 😭

[@djluminol]

@@stephaniefraser8574 Oh ok I see what you mean. If everything but that screen works than it seems likely its the screen that's broken. If the FX sections electronics were bad the FX would be dead and the screen would probably as well. Also the Unit may not even turn on. I'd bet if you replace the screen it will fix you issue. Although pay someone if your a novice. The insides are very complicated. I've taken mine apart three times and still fucked up and had to come here for a quick look at how to put it back together. And your is more complex than a DDJ-SX

[@stephaniefraser8574]

@@djluminol thank you so much... I managed to find a repair centre where I am... So now it's just getting it there... Yeah it all still works fine,still lights up ect hoping it's a quick fix and doesn't cost too much

[@djluminol]

@@stephaniefraser8574 I'd guess a couple hours labor plus parts. It's worth fixing for sure. It's resale value is twice the repair cost probably so even if you wanted a new one you get a third or quarter of a new one's cost.

[@shieldyourselfmusic8567]

hi bro is this the same process to loosen my faders?? they are way too stiff for my liking

[@RobertBrooks-u3g]

I have one of the pioneer ddj sx2 can you help me plzzz my mother board key are going bad you can help plzz

[@RobertBrooks-u3g]

Pizza man

[@shattanines1883]

hey good day bro can you do a video fixing sx3 and can you tell me where can I find sx3 crossfader replacement to buy online my sx3 crossfader is leaking bad need a replacement and a video on how to replace it

[@ElooVision]

Do you have the link to where you bought the faders from ?

[@djsnave_Kenya]

9:27 GENIUS!!!

[@jlaneaux1]

How do you get the volume sliders off? I tried pulling but I’m afraid of breaking something

[@DJNEALRAIN]

Hi There I have a Pionner DDJ SR2, I need to change the cross fader.. When I open the back it looks much more complicated that I expected. Please can you assist with a video?

[@DJROCKCEEENTERTAINMENT]

DJNEAL BuddhaFunk i change a Crossfader last week on Ddj SR, is very easy. But next time I have another one in the shop I will do a video

[@DJROCKCEEENTERTAINMENT]

kzbin.info/www/bejne/rpyni6OJr9GgbaM

[@mishanusound]

Nice job Dj Rock-Cee. Great tutorial. Not many videos online for controller repairs. Hey i have a question. The tip of my 1/2inch headphone jack adaptor broke off in my SX2. Is that possible to fix without having to install a new one? I tried pulling it out with a q-tip and a little bit of super glue but that didn't work. The local repair place mentioned sometimes the head phone jack has an open back so i was wondering if you remember if the sx2 had a closed or open headphone jack. If thats true i will take on the repair myself. If not i will send it in for repair because i suck at soldering...lol. i really appreciate what you do and thank you for any info you can send my way. Ps. i live in South Florida but i had a destination wedding in NC a few month ago and wish i knew of you then because my friends who got married needed a dj/sound service for their event after their cousin (who is a dj with equipment) had an unforeseen emergency. I was their emergency backup so they asked me to bring my controller which i did but i was amazed because they couldn't find a dj or sound company in the are that didn't suck. We ended renting some low budget gear from a low budget wedding company. anyhow i will pass on your info to them because they are young and hip couple with lots of friends that might need dj services in the future. the wedding was in Sugar Mountain but they live in Wilmington. Thanks & Repect - Misha

[@DJROCKCEEENTERTAINMENT]

Nu Sound Entertainment I have a new board on ebay that I have posted, you can just replace the board. Or you can send the board you have to my shop and I can repair it for you. Let me know what works best for you.

[@qwazi9054]

The black wire from the front PCB assembly was attached to where?

[@djanonymous6870]

I'll just get a new controller or ship mines out to get fixed,I think I'll mess mines up even more if I tried to do all of this 😳💯

[@glendeeken99]

What all Tools do you need pls comment. My DDJ - SX2 Power not working. Smoke came Out where the Lock Icon beside the Power button

[@vibes718]

Can The Sx2 audio board be replaced and what is part # ?!?

[@E.M.Center]

Thank you for your video i have ddj-sx the master level and all channel level meter led are not working < no control for all middle ( channel fader ) unit also an audio output from the headphone & out master , i tested power voltage 5 v. 3v . -15 . +15 are OK what is the problem thanks

[@mountainmusika]

check the front that its actually on PC for each channel .

[@E.M.Center]

@@mountainmusika Everything on the laptop works fine But on the ddj-SX device no LED indicators work and the volume keys do not work In addition to any of the headphones outlets do not work I Think the controller ( IC 29 DSP56724 ) is problem Thank you for your response

[@MrJaespun]

So this will work on the DDJ-SR2?

[@DynMarkMusic]

Where can I buy a Browse Knob Replacement?

[@djjandellx9959]

hey bro i been having a problem with my sx2 i wanna change both tempos they are fucked up and i bought them already but i dont know how to put them because when i open my sx2 the tempos are in the down side part and i dont find a way to take all those pieces off can u please help me?

[@vibes718]

Im trying to get my Sx2 fixed im getting distortion thru headphones any help ?!?!

[@59djatom]

Coucou superbe vidéo juste une étape n’est pas détaillé. Les bouton capuchons doivent être enlever entièrement même celui centrale très dur à enlever. Sur chaque potard bouton il y a un écrou et une rondelle il faudras les deviser entièrement car j’ai bloqué à ce moment là, pour pouvoir enlever carte avec les faders. Bon courage à tous n’hésite pas!!!

[@timasalomon1]

Thanks dude! Could you show how to replace play/cue buttons in DDJ SX?

[@djdeethekingoffire4408]

can the sx2 cross fader works in the sx3..?

[@shawngravatt2785]

I broke a Chanel fader on an sr2. You think it’s the same fader, because I can’t find one to purchase

[@DJROCKCEEENTERTAINMENT]

Shawn Gravatt www.instrumentalparts.com/704-djm250-a032-ha.html

[@shawngravatt2785]

DJ ROCK-CEE ENTERTAINMENT ok sweet. So the Channel faders are the same as the crossfader?

[@DJROCKCEEENTERTAINMENT]

Shawn Gravatt no sorry I send you the wrong link, this the link to the channel fader www.instrumentalparts.com/418-s1-701-ha.html

[@anthonyjacob5539]

he i will like to no how to reset the pioneer ddi sx2 to it's factory settings?

[@kenotv3047]

Ok can someone answer a question for me . I have a ddj-sx that the USB port that is at the back of the unit got broken and damaged.so the serato software would not split into two decks when connected to a laptop.. 3 days ago my other unit which is a ddj-sx2 had a accident and a beverage fell over into the mixer area.. so the first two channels are unresponsive.. my question is .. can I swap out that center mixer board from my ddj-sx (which I'm 100% sure is working perfectly) and put that board into my ddj-sx2?

[@djnickryan4562]

thank you man you really helped me out by making this

[@oyedokunabayomi2059]

Hello sir my DJ light I am also engineering I have a problem with one ddj sr2, it ON but it not connect please tell me the solution

[@garrytorres1]

How do I replace the Tac switch for the Play/Pause button

[@JustJoeMag]

At 1:24 you skip a step in removing the silver panel. Why?

[@silverado523]

can u do a video on how to fix one side that's play louder then the next side are should say channel

[@TheGadgetklinik]

Hello pls can you help me to get pioneer xdjrx crossfader complete

[@BassBunnyMusic]

Thank you SO much!

[@DJROCKCEEENTERTAINMENT]

You're welcome!

[@izzzzzz6]

Bro. I've just ripped the ribbon connector up off of it's solder pads! What do you mean push back the clips? Why didn't you explain that part in detail :(

[@DJROCKCEEENTERTAINMENT]

izzzzzz6 bro for you to ripped that ribbon connector off you had to be really handled it ruff, this kind of job you have to take your time. I do his video on your own risk, I don’t get paid for this shit, I do it to help people but I guess I should just keep my information to myself

[@izzzzzz6]

I thought you had to flip the white part up, id didn't see that the black part slides out from underneath. I don't think i damaged the connectors but now that side is mostly dead, looks like a new board at $200 @@DJROCKCEEENTERTAINMENT

[@duncangregho1986]

How to remove those ribbons? I don't want to mess with'em, thanks

[@joemarston-onlineentrepren5285]

is this similar for Sb2's? thanks man amzing vid.

[@djluminol]

I would skip this if your new to soldering. If you have some experience though it's not so bad. I've replaced 3 boards on mine and a few pots. I now have enough spare parts to never have to order parts again. Just take DETAILED pictures of each step with your phone before you start because assembly and disassemble is rather complicated and the repair manual is not to good. There are a few different types of screws but many look very similar and you can't replace lost screws at the hardware store. They are a metric size not available in most places in the US. They may be some proprietary size but I doubt it. I think you just can only find them at electronics suppliers. Probably online which means if you lose more than a couple screws your waiting a week to fix your controller and by then you will have forgotten how it came apart and you'll really be wishing you took those pictures. Thanks of the vid though. I forgot the order to install those staircase shaped grounding sheet metal parts earlier so this was a big help because I didn't catch that part in my pics but I could see it clearly in your disassembly. Like I said, DETAILED pics. And I'm not new to this and still f ed up.

[@eddeline132]

Awesome tutorial man...but... More focus on the hands, not in your face!!!

[@kemarseaton5578]

My ddj rb not lightning up when plug in USB cable places help me

[@moltenpros]

If I got to do all of that, then I might as well buy a new one.

[@DJROCKCEEENTERTAINMENT]

Molten Pros lol 😆

[@djabsolute6117]

i'm with you bro. i spilled a drink on my sx and now the channel fader that got affected acting up. I think it's time for an upgrade anyway so i just gonna cop the sx3

[@arieltambis2087]

thanks man!

[@djpeluca]

I would sugest that if you dont know what you’re getting yourself into leave it to professionals. cause there’s no trial and error here. make sure you know how to disconnect those ribbons if you dislocate one of those conectors is game over as those circuit boards are very expensive to replace , I tried to fix mine today and broke one of those conectors now I’m parting out my unit cause the circuit board is $300.00 and up. plus the hustle...

[@TecNickelSwag]

Thnx

[@dennisberry2456]

I need one use one to buy

[@algoo36]

Can someone please help mi to find a Ddj sx2 power board

[@miiqo1738]

So this is why they charge for a three hour job! They sure didn't make it easy.

[@accesshype8297]

Yo

[@diddy2790]

does anyone think this tutorial will help me replace mine on my ddj sb2

[@oscaratherton]

Redline have you replaced yet? Mines broken

[@jayroberts2758]

sb2s are just as easy as these

[@80-two]

Probably cheaper and easier to just send it off to someone who knows what they're doing..

[@njrealestatevideography5197]

Wow, that's major surgery!

[@dexxnik]

Your soldering abilities need improvements

[@JustJoeMag]

You’ve skipped the trickiest parts of this video. The removal of the first board inside is difficult and you skip it, undoing all of the cables and this video fails to show you the near impossible part of putting it back together. BEWARE PEOPLE: this ain’t no easy job.

[@djluminol]

Seriously. I take a f load of pics so I remember what goes where and when. Even then I missed one little thing in my pics so I came here to see. And I've disassembled mine 3 times. I would avoid this if your not mechanically inclined or new to soldering.

[@Fireproof_0_0]

@@djluminol hey would you happen to have any of those pics still available. there was a flash sharknado and i lost mine

[@djluminol]

@@Fireproof_0_0 I probably do I'm out at a friend's house right now when I get home I'll check and get back to you