How to test your Pioneer DDJ SX, SX2, RX.

How to est your controller before you send it in for expensive repair..

[@ast9281]

Thanks for the help I just want to add download Java that's what solved my problem after 2 days

[@nero-one]

funny one of the right deck ligh stays on when no track is loaded and when loaded track is on, color blinks on and off but i guess if it works lol nice vid...

[@djwachez]

you did not comment on testing the cross fader my cross fader does not cut the deck 2 sound ...how do i test it before taking it for repair

[@chillerinthemix1]

that's cool " thank you

[@dwaynecampbell622]

Yow Dj, great vid. I have a small question. What do you do if your mixer on sending audio only on one side. I have a older mixer which is a DDJ SR.

[@Itryeverythingonce]

Do you know why my bpm says 95bpm on my serrato dj but my controllers ayas 95.4?

[@steadymanos]

Is it off my a little for all the songs?

[@djluisangeldj9662]

Does this work an a SR1

[@steadymanos]

Not sure

[@wizentertainmententerprise9923]

I am having issues with the master volume fluctuating by itself, not sure if you have any insights. I’m playing and the volume is just jumping up and down either as soon as I start or after some time.

[@steadymanos]

Try unplugging your usb to the controller. Blow it, clean it, and plug it back up, but if you have another usb, replace it. If that doesn't work, it can also be your speaker cables.

[@steadymanos]

It could be so many things. Causing your volume fluctuating

[@wizentertainmententerprise9923]

I doubt it's the XLR or any other cables because I have used different cables and even up to this morning I've tried and it started to fluctuate. And the issues is, it drops lower and then takes some time then increases. Also noticed that channels 3-4 are louder than 1-2. I have a gig tonight and this is hella stressful. Ongoing issue for 3 weeks.

[@steadymanos]

@wizentertainmententerprise9923 try a factory reset, unplug all your cables to the controller except the power. And follow the video. Then, afterward, you can test the volume led like in my video. You can even see if it fluctuates. If you have another USB cable, try replacing it. I also lube my knobs and faders. They get dirt and sometimes cause problems. I spilled a sugary drink. I wiped the top, but it got in between the fader and getting sticky hard. kzbin.infog8QscJn5DSU?si=AOfjyexQyBOWVXxA

[@steadymanos]

@@wizentertainmententerprise9923 you can also try updating your firmware to the controller.

[@DJ_OUTLAW268]

Does this work with the ddj sz2?

[@steadymanos]

I don't know

[@colinedghill5872]

Yes this works 100%, all my lights went dead. Deck 1 & shif. Hold down. 3sec. Booyaka MR C

[@steadymanos]

@@colinedghill5872 so is your controller all good? If people don't know these trick they send the controller to get repaired and spend money.