How to replace the front shock absorbers Peugeot 2008 mk1 ➿

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Multi-purpose grease
- Suspension strut support bearing : maclede12.co/strutsMK382en
- Shock absorber : maclede12.co/frontshockabsorb... and maclede12.co/frontshockabsorb...
- Penetrating oil
- Copper grease : bit.ly/coppergreaseen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Peugeot 2008 1.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your 2008 1 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- Big flat head screwdriver
- Socket wrench
- Flat head screwdriver
- 7mm Allen key
- Sanding paper
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS... or maclede12.co/torquewrenchCLAS...
- 16mm socket
- T-handle wrench
- Snap ring/ Lock ring
- Wire brush
- Spring compressor : maclede12.co/springcompressor... : maclede12.co/springcompressor... or maclede12.co/springcompressor...
- Shock absorber head removal kit : maclede12.co/shockabsorberhea... : bit.ly/springcompressoren
- 36mm socket
- Crowbar
- Wiper arm Puller : maclede12.co/wiperarmpullerCL... : maclede12.co/wiperarmpullerCL...
- Adhesive tape
- 21mm Offset wrench
🔝💪Safely lift your 2008 1 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
- Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.
Usetool's infos
- During this operation, you will work on the steering system of your car.
- When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
- How to replace the sway bar links Peugeot 2008 1 🚗 : • How to replace the swa...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:15 Remove the shock absorber
6:06 Set the new shock absorber up
9:05 Replace the shock absorber

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@truth501]

You didt show how to set up the top mount offset

[@p--n]

Stub nut is a 35mm hex socket

[@mohsensoltanie9831]

Is the fastening torque in Nm or ft-lbs?

[@UseTool_EN]

Hi! It’s in Nm.

[@frankselling6874]

Super video, but annoying music!

[@slef2003]

Lose the fecking annoying music!