How to replace the fuel pressure sensor 2004 Ford Explorer

[@frankcarrascal]

YOU JUST LECTURE TO MILLIONS OF PEOPLE.. YOU ARE REALLY A GOOD TEACHER ..JIM..THANK YOU VERY MUCH.

[@nicholasmarino17]

Jim as a technician in training its great to see a guy as passionate about this trade as you. Most people I work with cannot wait to retire.

[@Joy-hh6cl]

Thanks to you making the steps very easy to follow, I can now do this on my own. Still learning here :)

[@sammyhooligan803]

I have the 2005 Ford explorer, and it has an emergency fuel shut off switch under on passenger side wall by top door hinge by glove box. I'm not sure if that model your working on had this but, before I shut off engine I pressed The fuel shut off switch of a minute and that removed fuel from line before I removed fuel pressure sensor switch. Ford put this feature to shut off fuel in case of accident that involves fuel leaking after an accident. But I used it for repair purposes also.

[@m.shannon7838]

Will a bad fuel rail sensor cause the engine to stall? I have a 2003 Ford Sport Trac (same engine lay out as the vehicle in this video)that stalls out in heavy stop and go traffic yet runs fine on the highway. Shop had it for two weeks and couldn't find anything wrong. Stalled out on me the next day. This seems to be something I could do myself. Thanks

[@m.shannon7838]

@The Mythology Turned out to be a short in the inertia (fuel) cutoff switch. Replaced switch ,(melted) plug and fuel pump relay. It was getting hot and shutting off the fuel pump.

[@douglasphillips5420]

Thanks. I'm grateful for you sharing your knowledge!!

[@jaymerjaymer]

Thought this vehicle has an anti-syphon screen. How did you drain all the gas before dropping?

[@sarahbeaird9541]

Two questions: Why was that sensor in a different place than other fords? Is it the model (looks like an EB edition) or had it been moved for that specific vehicle you were working on? And, how much is a repair like this?

[@brownman9060]

What would cause this to give out?I change this exact part a few months ago and this code pop back up

[@KennethCMcCoy]

Great video. Is it the same process for the 05 expedition?

[@Playstation5-d9u]

Ford ranger 4.0 2005 code p0452 fuel pressure sensor low circuit? Maybe that my problem or I need fuel pump?

[@semco72057]

I have not had that problem with either of my vehicles, but know what to look for when I do have that problem, and how to replace the part. Thanks for the information and hope you and your family have a nice weekend.

[@jimthecarguy]

Thank you Sidney you also . Don't forget to watch Sunday Night at 7:00 PM Live stream.

[@michaelmorales3049]

Thank you Jim mine is a 85 Ford Ranger 4×4 lite truck w V6 2.8L.your first video I found immediately greatly praiseworthy. Now my fuel gauge works ran both 9 volt tester on both connectors and ohm. Check .how do I remove the Sensor on this just behind the seat or at the fenderwell ? Getting purty good at this 😎

[@RevolutionarySeth]

Great video. Thank you for the instruction.

[@jorgeemilioperezfernandez4662]

I have a 2005 ford Explorer 4.0 liter and I have p0182 code poping up... I been told that it's the fuel temperature sensor.. I've been have so much trouble... any opinions ?

[@Poohdaddymagic]

Is this the same as a pressure regulator?

[@deloisrichardson6054]

Where is the fuel rail pressure sensor, on a jaguar x type 2005 ?

[@xviper03]

Thanks for the video Jim. Jim I own a 2007 pontiac grand prix I do smell gas in my car time to time but I'm not getting any codes. Is it possible that my fuel sensor might be the cause

[@markking2310]

Thank you for the video!!! Took about 10 minutes to fix my parents '04 Explorer Sport Trac. Easy easy to do.

[@jimthecarguy]

Glad it helped!

[@markking2310]

@@jimthecarguy didn't just help... It's the only video I found that gave me the confidence to do the job. Seriously, you are a gift to KZbin, keep doing what you do!

[@morrisw7227]

You neglected to say what engine size?? My 4.0 2004 is different. You neglected to mention where you attach your Snap-on diagnostic instrument. Is there a valve to attach a fuel gage?

[@fred306801]

QUESTION 2003 Ford Sports Trac. 4.0. I think my fuel pump is going out. I cycle the key, turn it on then back off without starting. The first time or two I can hear the fuel pump kick on and run. Then I cycle the key again and hear nothing. Is this because it has built up pressure ? Or is the fuel pump starting to fail ? It acts as if it is not getting any fuel. Sometimes it is a hard start. Once started if I let it run for a few minutes it will start up and run with No problem. The longer it sits the harder it is to start. So I have been taking some starting fluid and giving it a short blast. It fires up and runs rough for a few moments then smooth's out. The truck sat over night, this morning I went out and disconnect the MAF sensor. It turned over a time or to and started right up. I let run for awhile then turned off the truck and reinstalled the MAF sensor. IF I reeve up the engine above 3000 rpms it starts cutting out really bad. The same way it did when the catalytic converter's went out. The truck was running fine until I had to change out the Thermostat housing. Afterwards it starts this. Is it possible that one of the new sensors I installed, on the thermostat housing was either the wrong one. Or I screwed up and switched the wires around ? Because it does have two.

[@samrugtiv5563]

good job jim,well done ,sam

[@steves3730]

T-30 bolt torque spec is 53 INCH pounds, or 4-1/2 foot lbs.

[@jimthecarguy]

Thank you for your input.

[@rolandolucas3764]

i been watching you for a wild and i got to tell you the best

[@jimthecarguy]

Thank you Don't forget to watch Sunday Night at 7:00 PM Live stream.

[@gbolahanphilipsobadimeji1932]

My Ford sport trac 2004 been giving me problem. I have changed the fuel pump three times.I really don't know if fuel pressure sensor is the problem. Sensor is expensive and I want to be sure before changing it

[@josephscott5309]

Did you check the plug that goes to the pressure sensor for corrosion? Try cleaning the electrical connector, it may be turning the pressure sensor off and on erratically if there is a bad connection.

[@gavinvalentino6002]

So you replaced a fuel pump X3 instead of reading the CEL code and buying an $18 sensor to cure the actual problem? Genius.

[@gbolahanphilipsobadimeji1932]

@@gavinvalentino6002 Ford is a useless vehicle. Not reliable for long journey. Always disappointing. I can not advice anybody to buy it again. I sold the car after giving me problems upon ploblems.

[@BigDog50001]

Thumbs up Jim, excellent job!

[@jimthecarguy]

Thank you for stopping by .I hope everything is going good

[@BigDog50001]

jimthecarguy Going great Jim, thanks!

[@damianrussell7862]

can the pressure senor be used if the tip of the probe is cut off?

[@gavinvalentino6002]

Sure genius, using 3/4 of a part is probably close enough. Most parts are just made for looks anyway. *M O R O N*

[@everzamora9031]

Could one have lean issues with bad fuel pressure sensor?

[@injectorplanet4306]

most issues are due to worn out orings and seals, after 10 years everything rubber is shot

[@gavinvalentino6002]

That wasn't his question, idiot. The answer to his actual question is YES, a bad fuel rail pressure sensor can easily cause a lean mixture, especially under hard acceleration.

[@iship9705]

i have a 2004 ford exp 4.0 , what could be clicking in the back area of the truck ?

[@jimthecarguy]

Thanks for watching. The noise is it in the back of the truck by the fuel tank or is it in the back of the engine?

[@lebeckchris]

@@jimthecarguy I will answer for him! In the back of the truck by the fuel tank, i have that going on right now. What is that from?

[@gavinvalentino6002]

It's the belt buckle of the guy you ran over, scraping the pavement.

[@ghostfacep4]

hey sir is this sensor same as fuel temp sensor? po183 code

[@CubasAutomotive]

The one sensor does indeed have a temp circuit as well. 4 wire... 5v ref, then 1 for temp, 1 for pressure, then signal return.

[@cjcoolmoed]

My fuel pressure regulator isn’t so easy to get to and it’s a 04 explorer v6.

[@glenharper3136]

Never saw that type of fuse before Jim.

[@brycemumford9172]

Can you do a video on one with the SOHC set up?

[@redacted2025]

That's what I need lol

[@jpraz5381]

@@redacted2025 Did you find one?

[@stevebaca5389]

zmy 2003 ford explorer sport trac doesn't have one , I looked all over.

[@LA_Commander]

Skip to 9:00 to watch the actual job itself lol

[@normd4643]

how can I contact this guy? Have question about vw Passat heater fan

[@samuelgarrett3469]

Have a 94 Ford escort. Have power to multifunction switch and fuses relays, but no power at the headlights

[@bodgitandleggitgarage]

Nice job mate

[@WilliamBush1967]

why didn't you move the hard vacuum line right in the way those lines get brittle and break very easily from the engine heat and it's easier to not have to work around it and that was an easy one to move out the way the EGR value was right up top. remember most people watching or DIYers

[@jimthecarguy]

Thanks for watching. Don't forget to hit the bell for notifications when a new video is posted

[@cjcoolmoed]

Be advised that a bad fuel pump will make all kinds of sensors give false signals. Over 100k might as well change out. This is a good outcome of what most will see.

[@gavinvalentino6002]

"Be advised" the CEL code referenced is specifically for the Fuel Rail Pressure Sensor; hence, THE REASON TO REPLACE THE SPECIFIC PART THAT THE ENGINE-MANAGEMENT SYSTEM IS TELLING YOU IS THE PROBLEM.

[@samrugtiv5563]

see you Sunday night.

[@joebrann4612]

Good job

[@haug0099]

Perfect

[@mindiseverything5036]

I got a p0191 fuel pressure sensor

[@billy18773]

My 04 explorer is different from the one he's working on...

[@jimthecarguy]

Thanks for watching.

[@phillipbremer7715]

myself it po453

[@armandomunoz6518]

Smile nasty gas on my ford sport truck 2004 closeer to gas cap @ found later between cab on bad., run almost year like that one day stop and checked. Dropped gas tank down gas pump damage seal and replace all pump cost my like 260 dlls auto zone labor o due by my own job time 6 hra labor aprox...tame my breaks ..

[@injectorplanet4306]

and dont forget to change the injector orings & filters, for Genuine Ford Motorcraft fuel injectors & rebuild kits check us out www.injectorplanet.com/collections/ford-lincoln-mercury-motorcraft-fuel-injectors thank you -Bryan

[@SaiNtSmYli3]

[@Magnuss0724]

Mine melted

[@billknighton8778]

Wow too much talk and no action,almost talked us to death had to rush to er yakety yak don't talk back

[@jimthecarguy]

>

[@rickyjohnson9594]

O5 u got take off manfoil plastic top just get to the thing