How to replace the Inner and Outer Tie Rod 2009-2018 Dodge RAM 1500 🚗

Find the parts used in the video on CarParts.com just there carparts.solutions/RAM1500
⚙️ NEEDED CARPARTS AND PRODUCTS
- Inner tie rod : carparts.solutions/InnerTieRo...
- Outer tie rods : carparts.solutions/OuterTieRo...
- Penetrating oil
- Silicone grease
💪 TIGHTENING TORQUES
- Inner Tie rod : 125 Ft-lbs
- Tie rod end adjuster clamp bolts : 45 Ft-lbs
- Tie rod end holding nut : 78 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
- carparts.solutions/ToolBox
List of the tools we used to replace the outer tie rod on a Dodge RAM 1500 :
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Wheel lug wrench
- Marker
- 24mm wrench
- 23mm wrench
- Wire brush
- Ratchet
- 21mm socket
- 13/32” socket
- Ball joint puller
- Hammer
- Caliper
- Pliers
- Flat head screwdriver
- Tie rod removal wrench
- Breaker bar
- Adjustable wrench
- Torque wrench : carparts.solutions/TorqueWren...
- 7mm socket
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Dodge RAM 1500 safely : • How to jack your 2009-...
⚠️ CARPARTS.COM'S INFOS
- During this operation, you will work on the steering system of your vehicle. A professional alignment check should be performed to ensure that your steering system is once again perfectly adjusted and functioning.
- The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 How to pull up your RAM 1500
0:55 Remove the locknut
1:26 Remove the outer tie rod from the steering knuckle
2:24 Remove the outer tie rod
2:44 Remove the inner tie rod sleeve
3:03 Remove the inner tie rod
3:34 Put the inner tie rod back + tightening torques
4:08 Put the inner tie rod sleeve back
4:51 Put the locknut back
5:07 Replace the outer tie rod + Tightening torques
6:38 Tighten the locknut
6:50 Put your RAM 1500 back on the ground