How To Replace The Power Steering Gear Box On A Jeep Wrangler Tj

[@treacherousshark]

7 years ago and still relevant . Thank you so much friend .

[@kurtblackwell6214]

2007 is a JK, totally different gear box. In fact 2003-2006 use a different gear box too. Basically the same process, but you can access the lines on the box by simply removing the sway bar cover. As for bleeding, you can simply jack the front end up and turn the wheels all the way left and right WITHOUT starting the engine... this helps prevent fluid starvation if you don't keep close eye on the level while bleeding.

[@jessesward9429]

Whenever I’m doing a job and you have a video about it I feel a lot more confident doing it. Good video

[@Iam_Yu627]

Video is years old but still relevant. Noticed the box leaking and contemplated taking it to a shop. Now i see this is really something i can do myself. Thx!

[@juanmas4574]

Great video. I’m a novice and new to Jeeps. I noticed my power steering box is leaking. You made me feel confident in doing this myself.

[@bkell1011]

Thanks for making this video clear and concise, Brian!

[@HowtoAutomotive]

bkell1011 thank you for watching!

[@haselbw]

Thanks for posting this, very helpful. I also replaced my hoses, so I installed them before installing the gear.

[@ForceBuilt]

97-06 Jeep Wrangler TJ. Very good video! Thank you!

[@dmthompson44]

pretty sure power steering boxes changed to the Mercedes box in 02

[@WPF465BMAGA]

Excellent video, clear and concise, thank you.

[@mikes4307]

Great instruction. I especially like using your leg to raise the jack.

[@HowtoAutomotive]

Glad you like the video. Thank you for watching!

[@zeeune]

Thank you sir, my 1997 looks the same. I'm always working alone so this helps.

[@VapidToast]

Looks like you're helping me with my weekend project haha thanks for the video man

[@HowtoAutomotive]

Awesome glad video is going to be or some help. Good luck and thank you for watching!

[@MK-jf2te]

Thank you for this great video! As soon as the parts come in, I’m going for it. Hella appreciate the help!

[@JeepTJWheelin]

I have an '05 TJ Rocky Mtn and the steering has been an issue for a while now. It only has a 2" lift, 32" KO2's with 22lb alloy baja rims. Not even 70lbs total with the tire and rim. I have the Currectlync tie rod and drag link, Fox steering stabilizer and M.O.R.E steering box brace. I know these Mercedes gearboxes are not as good as the Saginaws but would it fail with this modest set up? I had the gearbox tightened between an 1/8 - 1/2 turn about a year ago. It helped but went off road recently and now the steering is starting to get a bit sloppy and wonky again. It has never leaked any oil that I know of, I'm the second owner.

[@stephenbelser6318]

Great video very helpful. One question what size / where did you get the new o-rongs? I cant find the part number

[@ludwig-vi6pi]

Good job to the point and no BS 👍🏼👊🏼 thanks for sharing

[@dcolenutt995]

I laughed pretty good when you used your leg, I have done the same thing many times. But love the video, it saved me a ton of time and headaches.

[@ljschannel3226]

Wow so fast and easy earned a subscriber

[@Purinelz]

Best how to video. Super job man!

[@garyconover4422]

Great video!! Thank you for providing this. It was very helpful.

[@lukasrudolph6544]

Best video I have seen on this yet! Thanks

[@Jursaw]

Great video, I like how you show that milwaukee tools are a time saver. I do that in my videos as well

[@HowtoAutomotive]

Jursaw nothing more important than saving time.

[@Jursaw]

How to Automotive I don't like lugging around an airline either

[@HowtoAutomotive]

Jursaw me either. These tools to make automotive technicians mobile

[@chrisduhaime5689]

When the Pittman arm puller starts bending get the torch it doesn't have to glow red just start smoking a little to get it give up but this is extreme cases. Like a last resort.

[@douglascountygenealogygrou1169]

Great video. But I can't seem to find the link for the tool needed. Would you send me the link. Thanks

[@EdwardC-rf9xu]

The new input shaft flat spot doesn't align exactly with the position of the old one. Do I turn the new input shaft slightly? What will be the impact on the pitman arm alignment?

[@larrynoname9340]

Big thanks for the very helpful video. Can I ask where you purchased the orings for the power steering lines?

[@michaelkies4224]

If you bought a new steering gear, the new o-rings should come with it.

[@kevinskillin9340]

I was looking at buying one that comes with a pitman arm attached, so would it be easier to remove the arm from the drag link instead of the box if it's already attached on the new one??

[@ErnestoMorales-t8b]

Where do you buy a new steering gear box? I live in Miami Fl Thanks

[@33ad1]

Great Job .

[@TonySaprano]

Awesome Vid.. You got mad skills :) I got a ZJ that I need to do and I'm sure it's the same procedure.

[@zuca9]

GreAt video keep up a good work 👌💪

[@HowtoAutomotive]

Thank you!

[@markremillard5135]

Is this a Milwaukee commercial? My DeWalt work pretty good

[@helenwisniewski664]

How long did this take in actual time? Nice video!

[@Cchilders70]

I i stalled mine on my 00 tj and i tried your bleeding method and it does not work. I also got a vacuum bleeder kit and i am getting air out but it seems like its air locked. Tonight i am working on it again and going to break the lines and try to get the air out and try again. Any suggestions on what to look for

[@allmycarsisbroke]

Your comment is super old at this point but for anyone else who comes along and reads this thread--you're supposed to fill up the PS reservoir to the fill line, then turn the steering wheel lock to lock 10-15 times BEFORE starting the engine, and then top off the reservoir to the fill line again, THEN start the engine and lock to lock another 5-10 times or so, then check fluid again and make sure there are no bubbles.

[@karlarsenault988]

Hi ! Nice video ! What is the socket size for the pitman arm nut that connects to the steering box, thanks?

[@HowtoAutomotive]

If I remember right it is a 1,5/16 And if you don’t have SAE Sockets a 33 mm should work

[@jerm4336]

Just did my steering gear box. Takes two people to do it. It’s heavy to handle. But can’t find a single video on how to fix the backup light switch on side of transmission. Impossible to get to or unclip the plug.

[@weaversbustedknucklegarage7696]

Mine is a 97....is it the same steps or is there something different? Thanks

[@HowtoAutomotive]

It’s going to be the same thing.

[@nathanbaker5053]

What size socket is needed for the nut holding the pitman arm on?

[@Crimsondust083]

Did you ever find out what size?

[@-___-19zs]

@@Crimsondust083 32-33mm for metric and standard size is like 1 1/4 or 1-5/16 or something like that

[@russloetscher7280]

32 mm is a hair big but worked for me

[@russloetscher7280]

A good sized pipe wrench will work too.

[@sunaJH]

Thanx a bunch-helped me out a lot:)

[@HowtoAutomotive]

sun Tao glad the video helped. Thank you for watching!

[@terryschaefer940]

i disagree. there is not much room to loosen them. i always drop it down with my trans jack with the jeep on the lift. great video. kristopher hill work smarter not harder

[@HowtoAutomotive]

terry schaefer I agree thank you for watching!

[@richardgarcia3016]

Great work up!

[@HowtoAutomotive]

Richard Garcia thank you!

[@frankn4618]

Thanks!

[@quintenmurray6881]

Is this doable without power tools? Want to do this myself to save $ but doesnt help if I need to buy a whole lot of gear

[@HowtoAutomotive]

Quinten Murray you need power tool to remove the Pitman arm and Pitman arm puller. The rest of the job can all be done with hand tools.

[@quintenmurray6881]

Bugger Thanks

[@HowtoAutomotive]

Quinten Murray glad to help. Thank you for watching!

[@nathanhayes1982]

Quinten Murray you do not need power tools, just muscle.

[@weezfan25]

half inch drive with breakerbar might work on the pitman arm/puller

[@boldlionpro2814]

Excellent

[@HowtoAutomotive]

Thank you!

[@robertfoilesjr1337]

Thanks

[@jeremy8715]

Its 1997-2006

[@rudyroman5192]

97-06 homie

[@jonathanhight3678]

Says that part wont fit an 03 wrangler

[@dmthompson44]

03 changed to the Mercedes box

[@unnimoyitk7945]

Mahindra 1997 how to make power steering wheel

[@briankelley9742]

How the hell you all gonna make help videos and not mention socket sizes?????

[@HowtoAutomotive]

Something I’ve added to my newer videos..

[@ryanmaya8685]

Service data doesn’t even provide that information and that’s something you pay for

[@elchikis7530]

hello can you help me get a steering box for a jeep wrangler tj 2004 4 cylinders

[@HowtoAutomotive]

I don’t sell or ship parts sorry.

[@kristopherhill2740]

nooo. everyone knows you break the lines loose before anything. as someone who works on rusty jeeps all the time I would know. and secondly if you don't unbolt the steering shaft first you wull hate yourself later. and if you cant hold the gearbox with your muscles maybe you should have someone else do it.

[@dennismilligan6000]

Hey big shot. The whole idea of lowering the steering gearbox is to get a wrench on the lines. 2000 TJ this is necessary. Disconnecrt the steering shaft not necessary.

[@TheNoobComment]

Thanks

[@HowtoAutomotive]

Thank you for watching!