How to Replace the Rear Wheel Hub Bearing on Your Honda Odyssey Ridgeline Pilot

[@incapabledub]

in fact i bet everyone that watches these is a true level A viewer they just love watching these vids brian.thanks so much

[@St0icst0n3r]

I love how you are unprofessional in your videos, makes learning what i didnt know fun and hearing what i already knew interesting Keep it up brother!

[@briansmobile1]

You're awesome! Don't let any body tell you any different. I'm happy to see you in the comments section- thanks for stopping in!

[@porsche558]

Back in the day before pressed bearings I thought you used to be able to just replace the bearings and races themselves without having to replace the whole assembly. At least the job isn't too difficult thanks for the vid Brian. Also I was surprised to see a mini van still using drum brakes in the rear this day and age.

[@tonistarks2874]

Dude I hit that big lug nut from the hub assembly with my Dewalt 20v max impact drill n came out like butter... That impact drill is so freakin nice n takes out any nut that's giving trouble.What I did was take out the hub assembly and popped out the old bearing with my 10 ton hydraulic press I got from harbor freight. Put the new bearing back in the same hub n done. Good video👍

[@wedreamtogether]

Thank you for all the great videos! Guys like you, Eric the car guy and real fixes real fast have helped save my family countless dollars. Thanks.

[@briansmobile1]

I agree on the drum brakes. I did another mini van hub today on an MPV that took some POWERFUL pressing. It took about 9 tonne to get it to crack!

[@briansmobile1]

Currently I have 500 videos on all kinds of helpful stuff. If I did it the other way, I'd have about 50 videos on only the most basic things. When you do it the way you describe it's ENORMOUSLY time consuming to stage and edit. That being the case I prefer to get information out there in mass because it helps the most people including me and then I can still spend time with my family too. ; ) Thanks for the input.

[@truckdriver4323]

I was thinking where is my jack go? Until I saw this video. Please don't say that you didn't steal it from my garage :) Very helpful video. Very good explained. And of corse the jack same as mine. Love it

[@ryansauto93]

Congrats on 500 videos Brian! They're awesome, keep them coming.

[@Eman52223]

I just found your videos and now I'm addicted to them haha thanks for the vids

[@Agathright1]

This will be my first comment on any video...ever. You are flippin' hilarious man. I'm going to watch you say "you bet your sweet mustache it will" for years to come. Instant favorite.

[@GerryJ08]

WOW Brian, super crisp video. HD ? Another great tutorial. You know, I think I can feel myself getting smarter. Go figure !!!

[@ManicMechanic007]

Congratulations on reaching 500. Beauty, eh? Keep up the good work Brian.

[@briansmobile1]

Glad you liked it! Thanks for joining along in the fun

[@Blackbirdintelgroup]

I very much enjoyed this. I'll be working on a pretty famous lil Honda fit tomorrow and I just watched for a refresher. Keep up the good work man! Keep those filthy hosiers out

[@KhmerBoy82297]

Just to let people know out there it might be a little different on the pilot and ridgeline because they are awd and a drive axle will be integrated in the process. good video man......

[@watuzi]

Very nice video, don't you wish every repair was as easy like that.

[@briansmobile1]

Thanks for watching along!

[@briansmobile1]

Those are to be pressed in and out. You can either remove the knuckle and press it in a shop press *(once the circlip is removed that's hiding behind the wheel stud flange) or you can buy an on-the-car bearing press.

[@killman1971]

Ditto to cracking the spindle nut on the ground. You can put on the spare donut or steel rim wheel and lower it back on the ground to make things easy. Note that if you spin and weld the inside bearing to the spindle that Autozone rents a $100 Posi-Lock hub puller that works well. KZbin a few BMW wheel hub videos to see how it works on these.

[@OPTIMUS6LTR]

Congrats on 500 vids brother looking forward to 1000

[@killerguitars52]

I LOVE your vids. Keep them coming! You are unbelievably humble and intelligent and I recommend all channel to everyone I know for advice. You are a true artist. I know this sounds like Im about ready to propose to you but dont worry Im not :p

[@spanermantim]

Happy 500th video Brian

[@curtis9188]

hey brian i did your eclipse method to align my car, it was so quick and easy. and pretty much nailed it. riding great :)

[@briansmobile1]

You caught that eigh?

[@briansmobile1]

Blocked exhaust, bad EGR valve, blocked air filter, or blocked fuel filter. Is check engine light on?

[@precopster1]

Happy half millenia (vide posting wise) Brian. Well done again!!

[@spelunkerd]

So, I'm assuming you just go to the autoparts store and buy the whole hub? Or, can you press off the bearing and swap over the speed sensor etc, and that way just replace the bearing?

[@wilson3707able]

thx for the videos. great sense of humor, its definitely your style. and you can bet your sweet mustache i will continue watching your videos.

[@briansmobile1]

I'm open to suggestions. I've thought about that before, but nothing seems to catch my favor.

[@briansmobile1]

You're welcome! Thanks for watching. We can always use more smart people in this world!

[@briansmobile1]

Great comment though. I wish I didn't have to sleep and could make the videos as cut and polished as I like my work to be. I used to be an accomplished little artist back in my school days. I got to skip school to represent my school for my sculpture and drawings. My teacher who I had HUGE respect for told me "Perfection robs creation" which means in that instance don't be so worried about your work being so perfect that you never get anything done. I really have had to apply this to vids.

[@N-Scale]

Very well done video and I really enjoy your humor. Thanks , Mike

[@hp11208]

Hey Brian i think you should come up with an intro or ending words,like scotty says rev up ur engine,eric close with stay dirty and 1pug says dont let the watchers get ya.What do you think ? it would be nice lol.

[@juanyboo12345]

YOU ARE THE MEN BRO HAVE A GOOD DAY THANKS FOR ANOTHER GREAT VID YOU SHOULD HAVE A TV SHOW BRIAN JAJAJ GOD BLESS

[@incapabledub]

hi brian, id figure this out for my self but i just love your videos, keep making them :)

[@GarrettJDB]

Do you want to put any anti seize on the threads of the shaft?

[@tubejim101]

Is this the same for a 99 Civic Dx?

[@fooey88]

how much was the replacement bearing for that vehicle? my front right one is going bad.. i believe ('03 acura tl). i hear grinding sometimes whether i'm turning or not

[@bryantrn]

@briansmobile1 i like to use the e-brake to hold the wheel in place while I loosen/tighten the lugnuts

[@briansmobile1]

hella beauty! Went out for steak lobster and cheesecake to celebrate with the Mrs. I got my hide tight on the tastes right!

[@watcbd]

Holy crap, this was your 500th video!!!

[@rwbishop]

If doing the job without an impact wrench, I 'crack' the spindle nut loose with the vehicle on the ground as well. You don't want to pull the car off the jack or jack stand messing with tight fasteners. Same deal for the final tightening when putting it back together...

[@briansmobile1]

I didn't even notice- should have done something cool- I DID get my best Google check today so far too! Cool deal- cool day!

[@KillerZero259]

brian you're the greatest. made me smile and laugh in the beginning of the video : - )

[@robinsonsauto]

great job like always, love the humor

[@xxdemasterxx]

Is this the same procedure for my 1997 honda accord?

[@kradius2169]

0:39 ... M8 x 1.25 bolt to push the drum off. Check. Thank you, thank you.

[@5thof6]

Brian: Fantastic video. How about changing the front bearings on a 2006 Honda Odyssey?

[@briansmobile1]

It's different but i'll be doing a video on a Acura TL soon. Also check out Eric The Car Guy's videos.

[@spazotis]

what to do when the inner bearing race sticks on the spindle??.... got to take brakes off to pry it off ...??? any easier way???

[@hp11208]

Are you the moustache guy in 1puglife video lol,cool video as always nice.

[@briansmobile1]

Holy crap! It is! Thanks

[@jorgepina4838]

I'm working on it now but as I pulled the hub out half of bearing casing is stuck in there. any advises for me to get that piece out.

[@ccd5068]

Is the Ridgeline the same? It has rear disc brakes and some kind of internal drum parking brake.

[@yheng4553]

Hi Brian, I was just wondering where can you get rear wheel hub bearing assembly (bearing pressed already)for my Honda Pilot 2003... I've been looking all over Internet couldn't find any... Only available is bearing is not pressed yet on the hub.. It cost me $70 each to press bearing here in NY. Are there any available or they don't really comes with hub assembly with bearing pressed? Thanks in advance...

[@BrockDunlap]

@Yheng Hey I am in the same boat. What did you end up figuring out?

[@iamthecvman]

Thanks Brian, looks like a good DYI job to me. I appreciate the instructions. Thank you:-)

[@briansmobile1]

lol Thanks brotha! I feel the love.... brotherly love!

[@MrScoobieman]

Will mine be the same? I have rotors all the way a round 2002 odyssey

[@peterbradshaw8177]

Came for the technical advice. Stayed for the bad jokes. Lol

[@pcgarlick13]

prolly the funniest repair video I've seen lol

[@afsecaira]

hey there! a friend has a kia 01 sportage and it wont accelerate! what could it be?

[@SteveRobReviews]

Thats a good safety habbit of leaving the tire under the vehicle should it want to fall.

[@briansmobile1]

Thanks Mo!

[@briansmobile1]

Gracias mi hermano!

[@MoneyMarcMes]

Hey Brian, I know you like Eric the Car Guy and I was wondering if you can actually show us the wiork your doing as your doing it in a step by step process. It would be so much more easier to understand that way. Thanks... Marc

[@whitecrow8140]

great vid bro straight foward info

[@smileyrod11]

can you do this job on a 2006 honda accord let me know thabks

[@briansmobile1]

Thanks Agath!

[@briansmobile1]

Thanks man!

[@incapabledub]

brian youre cool, it'd be great to work or ride dirtbikes with you, youre a true grade A

[@briansmobile1]

Good call!

[@briansmobile1]

Thank you! You're kind

[@briansmobile1]

Thanks

[@briansmobile1]

It's done as a whole.

[@oneilottey9498]

Thank you Jo, My wife to be her left side is making this crazy noise.

[@afsecaira]

Hi thanks for the help! it was a bad mass air flow sensor! :p

[@killman1971]

I recall hearing that the early Sportages had a problem with the air intake tube collapsing somehow causing this problem.

[@jbuilds1]

Great vid!

[@DesertRida9]

Wheel bearing for subaru wrx?

[@briansmobile1]

You're welcome!

[@MisterMattyMo]

Brian you're effin' awesome

[@spelunkerd]

The problem with repeating channel introductions is that regular subscribers need to watch it over and over and over again. If you choose an intro theme, it needs to be really short.

[@007Cornhusker]

funny and a top notch mechanic

[@briansmobile1]

de nada!

[@briansmobile1]

Ya, me too!

[@AngelHernandez-zd4ff]

for honda ridgeline 2006 Wich is measure of the cup

[@briansmobile1]

كنت دائما موضع ترحيب هنا. قد نعمة الله خير صلى الله عليك وعلى عائلتك.

[@briansmobile1]

Doesn't need it. I'd just rock it the way it is. If this was Michigan I might- just not on the spindle nut threads.

[@briansmobile1]

You bet buddy!

[@speedtime2834]

Would this work on 2001 acura mdx?

[@bigboyindaho0d]

Did you find out on how to fix it???

[@briansmobile1]

They're coming. I had to go to Mexico for a week. I'm back now.

[@briansmobile1]

Thanks!

[@Dadokjoey]

Brian thank enjoyed the video sure was a lot of help thanks!;

[@colbalt95]

For clarification, this is definitely not the process for the 02-08? Honda Pilots. The wheel bearing is not attached to the hub. It is attached to the whole casing that holds the suspension together. If you do not have a way to press the new one in or two jacks, dont bother DIY. You basically have to strip it down to the axle. You'll have to get a slide hammer and take out the hub. Because That hub is pressed onto the inner side of the bearing You will pop out the inner race upon disassembly. You'll have to disassemble the brakes and the parking brakes, take off the whole plate and disconnect the ABS Sensor. It is probably best to have anti seize as it was a whore to get off. A few big tips. Before removing the bearing casing, remove the tire rod at the back end so you'll not be too far out of alignment... the tricky part is Once you can take apart the casing, youll need to manipulate the weight of the car on two Jacks, a main one and a bottle jack because that bearing casing holds the frame to the everything rear end and the car will twist some to where you cant put it back on. Preferably you want to get a die grinder to clean up the inner bearing casing. It took me a few hours to get this complete.

[@anonymoususer1824]

Yea he's misleading people who have disc brakes in the rear with a press in bearing

[@briansmobile1]

I aint never had too much fun!

[@briansmobile1]

Provide low cost, high quality, and do it quickly.

[@briansmobile1]

Bad distributor- specifically the ignitor.

[@279spirit]

ok i know this is off subject but i know u do some electronics stuff my ps3 contoler wont do squat