How to Replace the Spark Plugs on a 2012 Chevy Equinox

[@ba7tow1776]

Pro tip! Take the ratchet off the extension when reinstalling the plug. Less likely to cross thread the plug when finger tightening by hand with just the socket and extension. Then tighten with the ratchet.

[@AdamMT1618]

I didn't think about that so ty.

[@Mrbluebas]

good advice always begin threading by hand and use anti cease compound sparingly. I went ahead and replaced coils after 90,000 miles. when you can buy new denso-ac delco coils for 25.00 a peice it just makes sense. also replaced vvt solonoids intake one was bad already so i replaced the exhaust as well for about 25.00 a peice at ROCK AUTO you will pay double at local chain auto parts stores.

[@donsmith9478]

It might be good to turn the spark plug backwards until you can feel it 'drop' into the groove for tightening it.

[@supra-bt2sl]

For those who don’t know the socket is a 5/8 deep socket

[@jessejames3988]

Thank you I was trying to figure that out

[@mashahyasharahlaphx4286]

Thank you

[@jasmorabb104]

Thats what I needed to know thanks

[@korst1k]

It could be also 16mm metric socket. And it preferably be magnetic, otherwise you need to use coil to get out the unscrewed spark plug.

[@josephhertello1314]

thank you! I just replaced my spark plugs in 45 minutes because I watched your video first. everything was exactly as pictured and described.

[@edtrainum2260]

Great job pointing out all of screws and attachments to remove the air plenum and engine cover. Saved me a lot of time tugging on them and figuring it out.

[@1973chevycar]

watched your vid, only took me 22 mins to change all 4 of them. thanks

[@yichuanniu1851]

Hello, I changed the spark plugs on my Equinox today following your video. Thank you so much for making the video. It is very useful and explanatory!

[@AdamMT1618]

Worked well using this video on a 2012 Equinox LT AWD. One piece of advice is do not use a socket and an extenion as 2 pieces, instead use a socket that has the extenion as one piece. This way you won't deal with the extenion becoming disconnected from the 5/8 spark plugs socket down the hole.

[@eaglescout9901]

What a great training video, I had to use Chilton manuals since 1968, I love the internet and the people who share on it. Now I don't have to do one for my son. Thanks

[@nhudson77]

Thank you so much because of you I changed my spark plugs with no problems at all

[@rbert1829]

Great video!! Thanks for making such an understandable step-by-step outline of what we need to do. I have a 2014 Equinox, with the 4-cylinder engine, and will be giving this a try next week!!

[@KennethArnoldarnoldservice]

Great Video! Now I have the confidence to change the plugs on my grand daughter's Equinox! Thanks so very much for your time!

[@BillOfAllTrades2016]

For those who are wondering, spark plugs require 15 foot pounds of torque. If you are working on your vehicle it’s important to have a torque wrench. Don’t just “tighten snuggly”

[@shanaeH82]

Thank you. Your video saved us 400 bucks.

[@DauidaYah]

Same quote I just got... I'm doing it myself!

[@divacupvampire4716]

Is that what the dealer charges?

[@paulgoddard9627]

Great video. Simple and to the point. Changed my plugs in 15 minutes.

[@josel8623]

Hi, thanks for the video, I was able too change the spark plugs on my 2013 equinox LT after watching your video. However upon removing the plastic cover with the hoses marked ECOTEC I noticed what appears to be small amount of oil and now I notice my check engine light come on along with notifications about emissions problem as advised by on star. any suggestions? thanks.

[@Chunographx]

Hi I know it’s 2023 , I was here to ask 🗣️ do you disconnect the battery before you do the tuneup, I’m going to watch this video and try doing it myself following instructions from you

[@jrzzrj]

didn't even know you could get to the plugs these days.....nice to know....thanks

[@bricklayers88]

Use to torque wrench for final tightening to the specified value. Anti-seize compound is a must on these heads. You have 2 different types types of metal and a chemical bond will form preventing future removal.

[@dapdynasty2314]

Hey guys i have a 2012 equinox same engine , this will be my first attempt to change them myself , what kind of extension tool do i need

[@warrenwallace2]

there are 2 compounds to use on the sparkplugs you only used 1 the 2nd one is electrical gel compound to put on the top where the boots push back on you put a thin coat on the top stud of the plugs to get a solid contact with the boots that way you won't get a miss fire so use 1st compound anti seize on bottom threads and 2nd compound electronic gel on top stud of the sparkplug for a solid contact.

[@divacupvampire4716]

Followed your video! Took me about an hour! Thanks.

[@Anonymous-it5jw]

Thanks for the video. Have you considered using a torque wrench to tighten the plugs? The spark plug torque specs are fairly low for this engine.

[@Altoelder]

That's not a bad idea. I had just hand tightened them, but a torque wrench would be a good idea.

[@karlt10]

1. You should put some high temp (copper) anti-seize on the plug threads. 2. You should put dielectric grease on the tip of the plug before pushing the coil onto it. If you have a torque wrench, 15 ft lbs is a good setting for plugs in an aluminum head.

[@mapmtony]

Is this same steps for a 2011 Chevy equinox spark plugs?

[@Altoelder]

Yes, this should be the same for 2010 to 2014 model years.

[@mapmtony]

@@Altoelder thank you sir

[@georgecyros6754]

Please use thread compound to save engine threads. Use torque wrench to spark plug specifications.

[@nickdavis8199]

Do I have to use a torque wrench when installing plugs

[@DerekEvan]

Same steps for a 2016 Chevy Equinox 4 cylinder? I can’t find another video for it.

[@donsmith9478]

Should be the same for 2010 through 2017 Equinox.

[@dyunior22]

mine are hard to come off.the thread is rusted.i might break it if i force it.anything i could use to help them loosen up.thanks.

[@christophermathern6796]

Thanks. I've replaced spark plugs a dozen times but I couldn't figure out how to get to the damn things on my Nox. Once I got the air box off it was gravy from there.

[@tonebonebgky2]

I used to put plugs in my old cars with my dad but he is older now and it's been years since I attempted to replace plugs should I attempt this or leave it to the pros?

[@bricemiller2644]

That thing covering the spark plugs is an ignition coil

[@danim1017]

Did you gap the spark plugs?

[@wickedness9866]

Thanks, I just bought 2012 equinox, I want to do my own tune up. And I usually use NGK for my chevys.

[@tsande1424]

Sorry for you. Please research the excessive oil consumption issue. It effects the 2.4l Ecotec engines.

[@kushsosa4209]

T Sanders bro the oil consumption is a fucking joke it goes from 5 quarts to 2 by the time you gotta change it what type of bullshit is that smfh

[@nickheroux7135]

What is the socket size I need to remove the sparkplugs ??

[@dyunior22]

pls. do a diy tutorial for engine coolant replacement. thank you.

[@fasteddie0318]

Just so you guys know, direct injection spark plugs are indexed so that it points dead on injector for optimal performance. A believe it or not, not indexing a spark plug can cause engine damage. Plus torque them to specs .

[@justinrahn4386]

Does any one know what the spark plug needs to be gapped to if you don't buy the ones that come pre gapped.

[@TheJaimecasado]

I just installed this Spark Plugs, I see that you linked NGK instead. Did you had any issues with them? The guy from Advance AP told me not to use the Autolite. How was your experience with the Autolite Iridium? Thanks

[@Altoelder]

The autolite iridium have been in there a year or two and have been running great.

[@skybluefeather397]

what is the torque spec anyone thanks... btw I use a needlenose plier to pull out the loose plug and to insert the new one... (for some reason I dont have the fancy type of socket with the rubber insert...)

[@cj599]

Should always never seize steel plugs when installing them in an aluminum cylinder head

[@CALICOAST805fishermanlopez76]

Thanks i like the way you explain everything made it easy for me to do this on my own.

[@chalaman2804]

Saved my ass $140 dollas!!! God bless!!

[@dannyhubert5722]

I have the same year as that one but burns oil pretty bad i change the oil i put 1000 miles on the oil 2 guarts low change plugs too need help please

[@Altoelder]

The engine in this car has had some serious issues. I believe Chevy put out a recall a few years back. You may be able to take it in to a dealer and have it repaired at no cost.

[@donsmith9478]

@@Altoelder My 2012 was bought used at 13,000 miles in 2013 and now has 70,000 miles. It does not use oil.

[@mcmelvinfourteen14]

someone knows what number of dice I have to use

[@MrJcbear89]

Good straight to the point vid. Thankyou

[@dustinkuebler5450]

Bro. Those black things you keep calling spark plugs are ignition coils.

[@Altoelder]

Ha! Your right, that's what I get for trying to film and narrate at the same time. Sometimes I no talk good...

[@BIGMOE007]

Is it the same for Chevrolet Equinox 2015

[@Altoelder]

It is definitely the same for model years 2010 to 2014. They may have changed it slightly on the 2015 model, but I think it is probably very similar if not the exact same

[@BIGMOE007]

@@Altoelder Is it a 10mm socket?

[@Chris-zi9bb]

Always hand tighten it in without the ratchet first! Then put the ratchet on and gently snub it up....

[@AntonioRodriguez2013]

Ok tech you make good work. Only you need one lhigts to see the video mor clear good work

[@grandman04]

Best quick guide bud 👍🏾👍🏾

[@michaelq1301]

What or why didn't you gap the spark plugs? Anyone know the specs?

[@Altoelder]

With these spark plugs, they did not need to be gapped

[@rickywindsor8393]

@@Altoelder ALL PLUGS NEED TO BE GAPED

[@donsmith9478]

@@rickywindsor8393 Didn't the plugs come pre-gapped? As long as you have not dropped a plug, it should be set. However, it would be a good idea to verify the gap. Good luck finding the specification for the plug gap. My owner's manual says 0.035 inch for the 2012 2.4L Equinox. Torque is 15 lb-ft.

[@bernadettedavis6466]

What tools I need to remove plugs. And sizes

[@christophermathern6796]

10 mm socket for the bolt holding down the coil pack and a 5/8 inch spark plug socket. You can use a 3/8 inch drive for both. They're not that tight.

[@09tigerkid26]

Awesome video, thanks

[@Chop_Chop_Biggums]

Gah which cylinders are which? I need to fix my misfire in cylinder 2. Gonna change the ignition coil

[@jasmorabb104]

Change one plug and wire at a time

[@donsmith9478]

Standing in front of the vehicle, the cylinders are 1-2-3-4 left to right. You might need to change all ignition coils at the same time, depending on the mileage of the Equinox.

[@SIRBULLPLUME]

What size wrench do you need? By the way great tutorial.

[@AdamMT1618]

5/8 spark plug socket and 3/8" wrench is sufficient.

[@mikee.319]

Torque spec?

[@T5X_THX]

Did you have to gap the new spark plugs?

[@Altoelder]

These particular spark plugs came pre gapped, I did not have to Gap these ones. Depending on what spark plug you get, you may have to gap them.

[@rickywindsor8393]

@@Altoelder No such thing as a pre gaped plug all plugs need to be set to the proper gap.

[@laloavila5045]

Thanks for the video i will use this video today👌

[@tre2472]

How many miles would you recommend changing them ?

[@emmanuelalcantar4170]

Trey K vi sas,chistosas

[@elmarito007]

Trey K rule of thumb is every 30k miles, but your owner’s manual should specify actually when to replace them

[@dannymartin5058]

Thank you for sharing this video! Very helpful!!!

[@mcmelvinfourteen14]

someone knows what number of dice I have to use

[@zofaa1252]

Could bad spark plugs be why my car is idling rough?

[@jasmorabb104]

Yes

[@kellysobaski9239]

2011 GMC Terrain check engine light

[@taylorwood1196]

Does the 2012 with a 2.4 have a coil pack?

[@divacupvampire4716]

Each "plug" above the spark plug is a coil.

[@newstart49]

If you don't use anti-seize compound on those plug threads, you will break the plug off in the head the next time you try and remove them and your torque on the plugs will be off too. CORRECTION. I could be wrong. anti-seize, I'm told is not required with ac delco iridium plugs. ??

[@cj599]

newstart49 always on a steel pug in a aluminium head

[@DJblake33365]

U should always replace spark plugs and coil together

[@bradlutz8516]

Finger tighten all the way down to snug... your gonna have people cross threading plugs left and right

[@equipolosantrax57]

Great video very helpful thank you 👌

[@cheyenne2003s]

Ac delco are better and recommended for chevy

[@morear15s]

Manuel 22 S I agree! I learned from experience that deviating from an AC Delco spark plug on a GM vehicle especially on the newer stuff that it is a bad idea. I put an Autolite plug in my father's blazer and it ran terrible. Never changed an AC Delco plug without replacing it with an AC Delco

[@nickdavis419]

So I should get ac Delco plugs rather that a ngk

[@leviathonthegreatone1477]

Actually NGK are the best for chevy motors yes Delco is oem but NGK is alot better plug .

[@nickdavis419]

I got the ngk and My truck running nice I can feel it got a Lil faster too in acceleration. Gas mileage improve by a Lil also

[@mike-smoke868]

nice video kind of dark though!

[@joshsimpson79]

Very helpful. Thanks so much.

[@vnnavyseal7567]

thank you 🙏 your video is helpful and easy! !! : to change spark plugs.:compared with huynhdai tucson 2005 6cyl

[@kirkbrown3243]

Never use autolite plugs in a Chevrolet always use A/C Delco and always use anti seize

[@Alle6575]

Thank you very much!!

[@nydeerhunter5166]

Hitting the spark plug didn’t make the gap wrong 🤔

[@Bull53]

Thanks!

[@samuelporter5245]

Thank you!

[@trooper326]

Coil pack.

[@johnjack5647]

"That's what she said".... Classic!!!

[@elpoky3830]

Thanks broo 👍🏼

[@johnames6430]

Use AC Delco not Autolite

[@nickdavis419]

Why ac delco

[@johnames6430]

Just use whatever it came with. There is no point to use a different plug since the engine was designed to be used with a certain plug.

[@nickdavis8199]

So how I find which plugs are oem on my 14 equinox

[@johnames6430]

Nick Davis quick call to the dealership will confirm, they should give you the part number as well, make sure you have your VIN handy before calling

[@tonebonebgky2]

@@johnames6430 unless the OEM plugs are terribly expensive and the aftermarket ones are cheap as dirt (seen it happen before).

[@derekbradford8271]

You can tell that he do not know what he is doing PLEASE DO NOT CHANGE YOUR PLUGS THIS WAY

[@robsharpe9248]

Tip #1 - Never buy one of these POS.