How to replace the thermostat on a Chrysler 200 2016.

[@grantpickering6577]

It have a blown head gasket. Oil is mixing with your coolant.

[@yobalema64]

Turns out the issue was the oil cooler, had to change the thermostat, and the whole coolant system because it was compromised as well, also replaced the radiator, it was clogged

[@joseantuna1995]

Same thing happened to my 200 milky oil mixed in water reservoir, tried to drain the radiador and nothing came out tru the lower drain plug ,so you recomend changing the thermostat and oil cooler

[@zachr4088]

Instead of all that tape to limit your swivel, try putting a small rubber O-Ring in the joint of it. Works like a dream!

[@DanielMunoz-hy6ir]

Thank you

[@geobarr1926]

Bub you have a blown head gasket a thermostat is not gonna make your coolant mix with oil

[@yobalema64]

It wasnt a head gasket , turn out the issue was the oil cooler , after changing the oil cooler , I then took the car to the mechanic to get the whole coolant system flushed. I have been driving the car for month now no issue

[@GuillermoQ510]

I agree Chryslers are crap & I hate when I have to fix something on my girlfriend’s Chrysler 200. Cheap plastic everywhere

[@juniorcarrillo874]

Me too my girlfriend has one im having trouble with it

[@steveo1584]

"I hate when I have to fix something" 🥴 Tell your girlfriend she needs to find an actual man lmao quit your bitchin

[@bryanzarate-hx7cu]

Hablaste demasiado , mas de lo que enseñaste

[@TheBeard42]

This video is no help. Thank u

[@yobalema64]

This video shows you how to replace the thermostat, and what tools to use to replace the thermostat, I might of say a little too many words maybe because I am not a youtuber , I try to find a video on how to perform this task , and couldn't, thats why I made this video

[@Jc-he2fi]

You have water in your engine🤦🏻‍♂️

[@yobalema64]

Engine was fine just a leak on the oil cooler , I thought it was the head gasket at first, but car only has 50000on the dash ..

[@steveo1584]

Did you replace the factory pipe bands? If so, how did you deal with those? I replaced a coolant hose with one from a dodge Durango, just had to cut it down 3 inches or so. Those bands are tougher than the car itself 😂

[@yobalema64]

Yeah man I used pipe clamps , very easy to use , and they work like a charm, I think the factory one , you have to have a special tool for it 😀

[@smrtngup]

Your head gasket is gone man. That's why the antifreeze looks milky. Your wasting you time changing the thermostat and flushing the rad, it'll still over heat and the oil is still going to seep into the coolent system.

[@yobalema64]

The thermostat wasn't the problem I found out later , the problem was the oil cooler in all things . It was leaking by, so after changing the oil cooler we did a coolant flush problem gone , never came back

[@danielsantiago1102]

U talk to much

[@taegee1951]

He definitely do.

[@yobalema64]

Lol thkx I made this video to help out not to make money or anything else , also if you feel that way then don't watch it😂

[@tasloc]

I came to the comments to see if I was the only that was slightly irritated by too much talking and skipping through the video to see some actual hands on lol