How to Replace Transmission Mount 2001-2005 Ford Explorer Sport Trac

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/103/H/transmission-m...
This video shows you how to install a transmission mount on your 2001-2005 Ford Explorer Sport Trac. Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens.
This process should be similar on the following vehicles:
2001 Ford Explorer Sport Trac
2002 Ford Explorer Sport Trac
2003 Ford Explorer Sport Trac
2004 Ford Explorer Sport Trac
2005 Ford Explorer Sport Trac
Tools you will need:
• Pry Bar 1aau.to/oH/1AXAA00020
• 15mm Wrench 1aau.to/oG/1AXAA00010
• 18mm Wrench
• 13mm Socket 1aau.to/oaK/1AXAA00015
• 15mm Socket 1aau.to/oaK/1AXAA00015
• 19mm Socket 1aau.to/oZ/1AXAA00043
• 3/8 Inch Impact Gun
• Socket Extensions 1aau.to/oaK/1AXAA00015
• Torque Wrench 1aau.to/oam/1AXAA00044
• Liquid Thread Locker
• Jack Stands 1aau.to/oN/1AXAA00065
• Rubber Mallet
• Wire Brush 1aau.to/op/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Ford Explorer 2002-2005 3rd Generation: • Ford Explorer 2002-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@hondaslave-kd6hi]

Awesome. In depth and excellent step by step video. Nice job

[@jamescurrier5828]

Great video! One question though. The only bolts that get threadlock put on them are the 2 that go in the transmission, that hold the mount to it?