Replacing the the transmission mount and passenger side engine mount. I did not do the driver side because it was impossible to get to.
Пікірлер: 17
@shark700070002 жыл бұрын
I was actually here to see the driver's side mount put in.
@gregorytaylor8622 жыл бұрын
Thank you for the tips, although I ended up having to remove the top bolt exclusively through the very tight space in the engine bay. I did get the driver side out. What I did was lift the engine with a hoist as far as it would go without breaking stuff, and then ratchet strapped the engine towards the passenger side to give me enough clearance to get to that bolt with a modified pass through socket wrench (I made it a stubby by cutting off half of the handle) and it all came out. I had no choice but to do the driver side as that mount had torn clear in half. I sliced the living shit out of my arms. One of my buddies told me to go in through the wheel area and remove the fender linings, but there was nothing there but metal, so that didn't work.
@901Babyboy3 жыл бұрын
Great video if not the only video that someone actually cares to show the process
@bayarbuyan844 жыл бұрын
How about the driver side of the engine mount?
@mymechanicfriend6017 Жыл бұрын
You got that lift up in your house man... That shit is cool as hell👍🏾
@JoesGoldenGarage4 жыл бұрын
Gotta do this today on my 07 e550 sedan. Should be the same. I hope. Your video makes it look fairly straight forward
@furkatusa10923 жыл бұрын
Thank you for you posting this video.
@Ulxmas4 жыл бұрын
This really helped thanks a lot
@tombiondi99692 жыл бұрын
Whenever I remove a part, I always place it down exactly the way it came out. Also, always have a sharpie on hand if it requires more detailed reference points.
@badkid732 жыл бұрын
What about the driver's side engine mount? was it as easy?
@coreyjoe16653 жыл бұрын
Torque specs for trans and engine mount screws?
@sonnylewis58802 жыл бұрын
So when I’m driving down the road there’s a noise under my glove box that sounds like my transmission is slapping it i replaced rear trans mount but it’s still their any ideas? It’s 2002 Mercedes’ Benz clk 55 amg
@gregorytaylor8622 жыл бұрын
If it happens under hard acceleration, that's the front motor mounts, one is snapped off. I experience the same issue... if I accelerated hard and let off the gas, it would feel like the transmission just smashed into the body of the car and you could actually see the shift knob move. Turns out, its the engine lifting off the cradle and dropping when you let off the gas.
@ArabMobn3 ай бұрын
Did you get a change to record the drivers side. I plan on doing this job next week. Also should I jack up from the bottom or use a cherry picker from the top?
@portugeepride3 ай бұрын
Never got to the other side. It was super difficult. I used a jack from under neath on a lift
@ArabMobn3 ай бұрын
@@portugeepride that’s scary to hear. Did you ultimately give up or you didn’t need to do driver side. My driver side mount is completely shot so have no choice. Starting to get worried, any information would help. Truly don’t want to pay $700-1000 for the labor cost.
@portugeepride3 ай бұрын
@@ArabMobn I gave up. It seems impossible at the time