How to Replace Transmission on Commercial TopLoad 38165P

[@Martin_Entertains]

This video really saved my hide. I have three of these machines in my apartments and I've been replacing them with used machines when the transmissions go bad. I can't get used machines anymore (at least when I need them) and this video inspired me to do the job myself. Between this video, it's seal kit companion video, and the kind support of the folks at parts4laundry, I was able to get the job done in about the same time as the appliance guy would have taken. Thanks so much parts4laundry! I'm actually looking forward to my next transmission job.

[@erwinvalks100]

thank you for learning how to change the transmission of a speedqueen washmachine

[@omaralvarez508]

Excellent video!

[@t.dionmccormick3425]

Excellent vid, well put together like the machines I repair, thanks on the instructional video...👍

[@folcran]

Hi, thanks for video. Can you explain how to release the brakes? My brakes stucked.

[@DMahalko]

Although they show tearing out and replacing the seal at the bottom of the tub, it looks like you don't HAVE to do that if it's only the transmission, as it just slides out of the tub bearing. I expect it is recommended to do both because the extensive under-frame disassembly to replace the tub seal and/or transmission.

[@61SGman]

I've done this procedure on a speed queen washing machine, 3 year, the machine appears to be operating correctly but has a slight grinding noise on wash cylce and spin before it reaches peak rpm, is there any reason for this, the only thing I can think of is the 2 washers on the brake (plastic and metal) may be around the wrong way, any ideas?

[@Morgan-if5zt]

Did you sacrifice a virgin before undertaking this project? That could by why....

[@markpasieka]

again, how do you gofro turning off the water to the tub tabs?

[@GoodMemoriesToRemeber]

can you help, why i see my speed queen TC5 Tub Cover Assembly look lit it had a plug and some kind of liquid in it like radiator color liquid, any one have any idea, pls help me, should i drain it or just leave it like that. thx

[@education9135]

Why do u change the transmission what happened to the washer

[@mattaustria2530]

What oil is used for the transmission?

[@jeromedavis8575]

What gear oil does Speed Queen use?

[@GoodMemoriesToRemeber]

Thx

[@monaviv3402]

Does anyone have any idea why when draining spinning water spills from top between balance ring and cover???

[@bigpun761]

It could be a bad tub ring seal or Rust has made a hole under the tub ring.

[@TheSrklop79]

This washer is brand new try this on one that has been in service for 15 to 20 years.shit dont come apart

[@SnickasBah]

Russ Polk yeah I cracked up when he just lifted that hub off the transmission shaft.

[@marc2797]

Yeah i got a good laugh out of this as well !!! And he did all this in 14 min's

[@cleansebob1]

"If it was easy, anyone could do it..."

[@danielorozco8046]

What brake are you taking about?

[@dioniciomoralesadorno7520]

Si m pueden ayudar con esta marca para el cambio d baleros

[@tripjet999]

Held together with GLUE? Thought they were better built.

[@timokkers1346]

Is this guy using a fake drum for demonstration purposes.

[@TheGoldpiston]

Koblenz top loader are identical to this one

[@kenmorewhirlpool7077]

This is not very clear....

[@cuervo2588]

Una pregunta

[@manuelzambrano3207]

Amana lavadora

[@newbean96]

or buy $299 washer at kmart

[@SnickasBah]

newbean96 every 2 years

[@applianceman6009]

They are only going to last 7 years. Whirlpool washers are made in China and Mexico and finally have a drilling done in the USA. Assembled in USA

[@applianceman6009]

The old Whirlpool direct drive washers were made entirely in America.

[@MIGASHOORAY]

So complicated compared to a Maytag MAT 12

[@robertlyman9789]

Do this on an old nasty dirty stinky rusty machine