How to Replace Upstream O2 Sensor 07-12 Toyota Camry

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@nicoledevous9304]

I cannot thank you enough for this video. When I heard that it was going to cost $428 to replace my oxygen sensor at the Toyota dealership, I about gagged! I went and bought my own part, installed it with the help of your video and saved myself $250! Thanks again.

[@1AAuto]

+Nicole De Vous Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@lemonyskunkketts7781]

I have an 06, the exhaust manifold should have a heat cover bolted over it. Also, there is no need to mess with the air intake.

[@Yogangster1995]

Where is the sensor located for the 3.5 V6 model?

[@seanmalone7920]

How do I know if my 02 sensor is bad or my catalytic converter is bad . I loose power during acceleration past 3000rpm or 3rd gear

[@tomjrg1997]

Does this procedure work the same for a 2007 Camry XLE? My engine bay is very different?

[@tenzackyogi1742]

I saw 2 torque setting on O2 sensors. 1. M12 sensor torque= 13-17 ft-lbs.(avg=15ftlb) 2. M18 sensor torque= 26-33 ft-lbs. (Avg=30 ftlb) According to NTK brand suggested info.

[@oceano_drive241]

once replaced, when does the check engine light comes off?

[@alphonsotownsend8208]

Thanks for your time and effort.

[@manoylangmalakas7296]

after changing the o2 sensor need to restart the Ecu or no? cause the engine lights still on??

[@1AAuto]

+Tng Ina Yes, you should reset the ECU. Thanks for the question.

[@oceano_drive241]

@@1AAuto How do I reset it?

[@1AAuto]

+Oceano_ Drive Thanks for watching! With O2 sensors the light will typically go away after driving at least 50 miles. If it doesn't you can try to disconnect the negative battery terminal first. If that does not work then you will have to clear the code with an OBD-II code reader.

[@gr8dfender742]

I have a 2010 SE. 2.5 ltr. My sensor is on the side about 7 inches below the sensor shown here.

[@caramellohoney]

Could a bad Oxygen Sensor cause rough idle, more rough idle when AC turned on. Had: New Air filter, spark plugs, oil change, New Alternator, Battery check ... Rough idle still there. More so when car has come to a stop and just running. And when AC switched on. Could this be one thing even though I don't have error code. Haven't cleaned throttle body yet?

[@alfredocanto9901]

I should be fine using a wrench like you did? I don't need those special oxygen sensor tools ?

[@rajupreti0000]

Was this B2S2 oxygen sensor replacement? Is it the same for Camry V4 and V6 models ? Thank you

[@msb9582]

Thank you very much! very nice video

[@bradholder]

Thanks so much! Helped me out big time!

[@1AAuto]

+Brad Holder Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@francigonzalez9798]

Hi, I'm fixing a toyota camrri, I also want to confirm if that is the same sensor that I had, because I put another one on it. from the same camrri likewise but that uses it a little more for bass and you have the shorter cable and it threw me the code p2238.

[@McGuinness89]

I’m getting Ho2s bay 1 sensor 1 code on my 2007 Camry 4L. Is this it?

[@1AAuto]

+Brian McGuinness We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@tovis_bratsburg]

Is that a factory Catalytic Converter or aftermarket?

[@josemejias6343]

I have 07 camry 4v same manifull catalytic...i need manifull catalytic can you send me link to buy please 🙏

[@KONAgoDigital]

Is this a bank 1 sensor 2 on a V6 Camry?

[@trumpdoanld7720]

How do i find that clip for the wire harness from the O2 sensor

[@trini_boi2414]

The new o2 sensor wires is too short can I splice the wire with the old o2 sensor wire to make it longer?

[@robertjohnson779]

no, won't work if spliced

[@tk2255]

What is the code appears for Upstream sensor? Thanks

[@kollak01]

bank 1 sensor 1

[@GmaFctr]

P0420

[@Mightymorphinforeskin]

My 2009 Camry SE has a P0031 code. Would that be the upstream oxygen sensor?

[@1AAuto]

+Carmello Heights A faulty upstream O2 sensor could be the possible cause for a P0031 code.

[@joseglez57]

Will it work on Solaras? (2004-2007)?

[@1AAuto]

+Jose Gonzalez This will be the same part for the 2004 year with the 2.5L engine. It will not be the same one for the 05-07 years. 1aauto.com

[@vieboi5483]

This is bank 1 sensor 1???

[@tk2255]

What it S the code for upstream sensor? ThNks

[@ikennaonyeneke5841]

I loosed the sensor when it was still hot, i think i got the bolts worned out 😢

[@NewYears1978]

My code said bank 2 sensor..where is that one?

[@Rockefelleryoo]

i know my oxygen sensor is bad..but i m not sure it's upstream or downstream ? how should i do?

[@mywonderfultoys]

Computer for code

[@niegireiareddix]

What is the part number?

[@shawnthaxton9182]

Replaced this in our 07 camry today had a p0031 heater circuit code now with new sensors have a p2238 🤷‍♂️🤦‍♂️

[@roonbopp]

dont think you need to take the intake off personally.

[@theguymaxqc]

wow you should see where the o2 sensor is located on my suzuki grand vitara lol i need to cut my hand in half

[@chrisjones8944]

What next if that doesn't work.

[@carlosbetancourt6389]

P0171. P0174

[@TA-op3vn]

Who cares about easy job on 2.4 !!!! Show on 3.5 !

[@emmanuelv3702]

u really don't have to remove the whole air filter.🤦🏻‍♂️