How to Replace Valve Cover 2007-2012 Nissan Altima

Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ib/NSEV...
This video shows you how to install a new valve cover gasket in your 2007-2012 Nissan Altima. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/objI/1A...
• Phillips Head Screwdriver 1aau.to/objI/1A...
• 10mm Wrench 1aau.to/oVE/1AX...
• 8mm Wrench 1aau.to/ohS/1AX...
• 10mm Socket 1aau.to/obaK/1A...
• 14mm Socket 1aau.to/obuG/1A...
• 16mm Socket 1aau.to/obuG/1A...
• 18mm Socket 1aau.to/oagX/1A...
• Trim Tool Set 1aau.to/oabD/1A...
• Vacuum
• Needle nose pliers 1aau.to/oDu/1AX...
• Needle nose pliers 1aau.to/oDu/1AX...
• Pliers
• Ratchet 1aau.to/obAP/1A...
• Socket Extensions 1aau.to/obuG/1A...
• Torque Wrench 1aau.to/oaED/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oB7/1AX...
• Gloves 1aau.to/o6T/1AX...
• Marker / Writing Utensil
• RTV
• Safety Glasses 1aau.to/oX7/1AX...
• 5mm Hex Socket
• Jack Stands 1aau.to/oTy/1AX...
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/oja/1AX...
• Sanding Block
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@slumerican_rich]

How long do you wait, after installing the new valve cover before starting the engine back up??

[@rhonnice]

I wonder how much does shops charge for doing this..tgeres no way I can do this kind of job in my car

[@jammer5166]

You had absolutely no reason to take off the injector wire harness. That was a waste of time. You are the only one in their videos that does that.

[@marilynlee6284]

How do i do that if i don't have that kind of tool with measurements of tightness?

[@meftv8364]

Wonder who designed this engine...🤔

[@choccolog]

don’t show a Tory speck for the York strut side bolt

[@choccolog]

Tork Strut side bolt ….. seems like my computer is making up words for me

[@Subbannn]

I changed my head gasket 5 years ago and also changed my valve cover gasket while doing so. Found that my valve cover is leaking already, only did 30k with the car... seems like a redundant problem on these engines

[@ricardoauralebronperez5110]

Nobody shows how to change the seals for the coil packs 😂😂😂

[@charlies6546]

excellent video, airbox slides into 2 grommets not rubbers, rubbers r a whole different story...

[@oaxacolopez266]

Thank you very much for explaining how to change the mechanical parts, it is interesting, thank you..

[@loganpond6603]

Yo this guy has really nice arms 😮

[@irwincarter2820]

B +