Рет қаралды 36,734
Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ib/1AEV...
This video shows you how to install a valve cover on your 2008-2013 Nissan Rogue.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar 1aau.to/oRs/1AX...
• 10mm Wrench 1aau.to/oT4/1AX...
• 14mm Wrench 1aau.to/oT4/1AX...
• 10mm Socket 1aau.to/oa5y/1A...
• 14mm Socket 1aau.to/oboF/1A...
• 16mm Socket 1aau.to/oboF/1A...
• 18mm Socket 1aau.to/oady/1A...
• Air Compressor
• Trim Tool Set 1aau.to/o8e/1AX...
• Needle nose pliers 1aau.to/oCh/1AX...
• Needle nose pliers 1aau.to/oCh/1AX...
• Pliers
• Torque Wrench 1aau.to/oaz8/1A...
• Block of Wood
• Gloves 1aau.to/oW9/1AX...
• RTV
• Safety Glasses 1aau.to/oQj/1AX...
• Sandpaper
• 5mm Hex Wrench
• Floor Jack 1aau.to/oZX/1AX...
• Rubber Mallet 1aau.to/ogw/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.