How to Replace Water Pump 2007-2013 Chevy Silverado

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEW...
This video shows you how to install a TRQ water pump in your 2007-2013 Chevy Silverado. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar 1aau.to/oM3/1AX...
• 10mm Socket 1aau.to/oaWH/1A...
• 15mm Socket 1aau.to/obfk/1A...
• 24mm Socket
• 8mm Socket 1aau.to/oaWH/1A...
• Serpentine Belt Tensioner Tool 1aau.to/ocA/1AX...
• Stretch Belt Tool 1aau.to/om/1AXA...
• Trim Tool Set 1aau.to/o3J/1AX...
• Hose Clamp Pliers 1aau.to/oeN/1AX...
• Ratchet 1aau.to/obqo/1A...
• Socket Extensions 1aau.to/obfk/1A...
• Torque Wrench 1aau.to/oauz/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ozw/1AX...
• Drain Pan 1aau.to/ovM/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@angeredmonkeman7094]

What was the purpose of taking the bottom belt off?

[@gregoryyerkman1032]

Removing belt around AC compressor is pointless and use RTV sealant to hold gaskets in place

[@loganwyatt1614]

He probably removed the compressor belt so the radiator fluid wouldn’t dump all over it. Smart.

[@ronaldscott781]

Thank you for including torque specs.

[@sHaLeMoNeY87]

I’ve learned a lot from these guys videos but, taking off the A/C belt was a waste of time and unnecessary…

[@NickT1861]

I’m convinced this dude purposely makes things more complicated so we’ll pay mechanics like himself for the work😂

[@jorgetrevino5757]

Thanks with right tools is super easy recommend get a Milwaukee power ratchet and a digital torque meter

[@bjrnmagnusun9750]

If only all how-to videos were as clear and easy to follow as this.

[@JulioLaraLovo]

What was the reason for changing. Leaking. Noise or bearing damage???

[@joshuasanchez9851]

I have one question..I have a 07 2500hd 6.0 that is fluctuating on the tempature.. would that be a thermostat going out or the water pump?

[@MikeSmith-nu9wt]

That's a nice looking green belt , do they still make them ?

[@maurice5155]

How are people watching a tutorial and telling the teacher their wrong in one of their steps, excuse me but you came here for help not them😂

[@Deleting-xk3su]

The thread part where a fan would go should it be rusty or no?

[@Bluecollarlegends5280]

Thanks for the video guys .

[@josegalvan8765]

Is there a way to remove the water pump pulley itself. Im going to replace my 2007 yukon denali intake camshaft position sensor, but the harness has another bolt behind the shaft pulley?

[@user-hm8ch1pc2n]

DO YOUR RUN IT WITH THE LID OFF SINCE IT AINT HOT YET SO IT CAN BLEED OUT THE AIR OR JUST ADD THE COOLANT ,CLOSE LID AND THEN RUN IT ??????

[@ajaxflores279]

No glue or seal thing for gasket?

[@peggycastro5941]

I guess I'll be hiring someone. 😮‍💨

[@visionvlogs4131]

Do you need to bleed the coolant system ?

[@andyvolk2796]

Don’t you have a fan clutch you need to unscrew from the treaded shaft on the end of the water pump pulley?

[@capitang2229]

i did everything on the video put it still gets hot i cant find out what’s wrong

[@viperdane22]

Wait, I think I missed a step…..what about the fan??? I skipped the bottom belt, hope that wasn’t important 😳

[@Nicks_Mobile.Mechanics-service]

WAIST OF TIME TAKING THE LOWER BELT OFF I DONT UNDERSTAND WHY YOU DID THAT. TEACH THERE OWN . THESE ARE CRAZY EASY TO DO

[@thomasmcnicholas8656]

One step missing ….. fan removal 🤷‍♂️

[@JayFuentes-gs2bl]

Hahahahahha ac belt was useless