How To Replace Water Pump - Chevy Avalanche, GMC Sierra 4.8l 5.3l 6.0L

How To Replace Water Pump Chevy Avalanche. Chevy Silverado, Suburban, GMC Sierra, Yukon 4.8l 5.3l 6.0l 1999-2005 Water Pump Replacement Step by Step. Thermostat Replacement On Chevy GMC Water Pump's. Step by Step Water Pump Removal and Install.
Water Pump - amzn.to/2EFeCTk
Thermostat - amzn.to/3b0QM0x
Coolant - amzn.to/32tR1NJ
Crescent Wrench - amzn.to/3hyOh8i
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases.

[@dalemoore7416]

Thank you for a straightforward tutorial. No intro to deal with, no 5 minute verbal explanation, just straight to it. This is the kind of KZbin tutorials that need to be out there.

[@backyardchevy328]

Thank you🙂 really appreciate it

[@bensonhedges5471]

Totally agree!

[@brianandcindy1]

And no stupid music to distract!

[@flex2125]

can i just replace the gaskets if nothing else is wrong?

[@chadfelmet6934]

Currently in the middle of changing my water pump using your video, but its already been a huge help, and watching it fully, I can tell I'll be able to complete it shortly, A-Z. Very thorough, not skipping certain actions here and there like some videos. Thanks for your help bro!🤜🤛

[@bensonhedges5471]

This is the BEST tutorial on how to replace a water pump....and I have seen a lot of them. Easy to understand, good clear video, and to the point. GREAT JOB!

[@backyardchevy328]

Thank you very much🙂 really appreciate it

[@robertbazaldua1627]

..

[@FaL0610]

Just saved me $500 bucks, thanks dude.

[@Patrick-er7xb]

How long did it take to complete this job? Was quoted 6 hours for 700$!!! Might do it myself instead

[@bradmcallister]

Absolutely the best instructional video on KZbin for automotive I have seen! After seeing this video on replacing the water pump, I decided to do it myself. Even the quality of the video (lighting, audio, and steps) were well done and I do video/film production for a living. I subscribed to your channel just because of this video.

[@uplatejay]

Hands Down This is the BEST INSTRUCTIONAL VIDEO for replacing the water pump.....PERIOD. Its Perfect!

[@h.camacho4800]

Best step by step video I've seen, and I seen alot, great job man thanks

[@backyardchevy328]

Thank you🙂

[@MolecularDrift]

Thank you sir! Of all of the “how-to’s”, yours is the best one and I wish I found yours first! The video step-by-step and your commentary is fantastic!

[@WUMA-WattsUp]

Excellent video. I'm confident I can permform a water-pump job on my Avalanche now! Thanks for sharing!!! New sunscriber!

[@Jaeko8041]

Iknow old 1976 chevy v8s butt it's all new know

[@dwreed63]

Very good video, thank you for posting 👍👌💯

[@boomersnflyers]

Great tutorial. Detailed, including the size sockets needed. Thanks!

[@backyardchevy328]

Thank you🙂

[@freddyblanco8990]

Thank you very much it was very helpful watching your video well perfectly explained step by step appreciate you

[@fish4fun354]

Man, I feel dumb paying $650 to have this job done, but all well I needed done right away and couldn't drive for how bad it was leaking. By the way how much oil does that motor use? That's a lot of cake on oil on the engine.

[@koryyyy]

A friend has a leak, he is far so he is showing what he can via phone and I'm pretty sure that the pulley seals are leaking like yours. its "only" 110k miles. It leaks when the van engine is not running. Thanks for the veri detailed video!

[@matthewwinters6857]

Brother THANK YOU! HELPED ME FIGURE OUT MY WATERPUMP AND REALLY WENT QUICKER THAN I THOUGHT. U DA BEST

[@FelixRosas10]

Man, thank you! I pretty much know nothing about cars, only ever changed tires, oil, and brakes. This video was the BEST guide I found. Got it all done pretty quickly. Thank you! Subscribed. 💪🏽

[@justinbingham6898]

Great video. Thanks

[@russellstewart5414]

Great job and the pacing of the video allows us at home to do the job basically in real time. Mine was a Ford but the same base process and it took about 1 hr . Keep bringing us great content, we appreciate your hard work

[@ChrisMan183]

The fan clutch was horrible to remove. Nothing worked so I just took the whole pump and fan out together. Other than getting the fan off it was an easy job, good video

[@ryandavis4689]

This was an awesome tutorial I really appreciate it, I'm saving it, I'm about to do this job this weekend, the only difference is is mine has electric fans, what was that pad that you used after the razor blade in before the blue towel to clean off the gasket area? Never heard of em i don't think

[@RazeX420]

Will this also work for the 2004 chevy suburban 1500 ls / it’s an 5.3 v8 vortec

[@Theorcman2008]

That belt is cracked all over the place. I hope you replaced it shortly after this video was made. In fact its good practice to replace the belt no matter what.

[@DavidDabbs-mz7ht]

My 2003 doesn't have a drain plug were it should be and what do L do? Has any one else had this problem?

[@gtownsend90]

Amazing step by step, I feel really confident taking on my water pump on my 04 avalanche. You are my new KZbin trainer sir!! Lol. I liked, saved and subscribed and look forward to seeing what other content you have on the chevy. Thank you!!

[@backyardchevy328]

Thank you i really appreciate..im sure u can do it..i believe in u🙂

[@gtownsend90]

@@backyardchevy328 got the old pump off!! Thank you so much again man, do you by chance have the part numbers of the pump and thermostat you used? My thermostat is a one piece. I was going to order online to save some cash but might just take it to the part store so I don’t have to return a wrong part.

[@backyardchevy328]

@@gtownsend90 thats awesome..great job..the one i got was 39787 murray..for the thermostat...and cp5104 murray water pump

[@megancoaker5775]

@@gtownsend90 just now hard was it bc I have to do the same....

[@gtownsend90]

@@megancoaker5775 it was extremely easy, took me maybe 20 mins to get the old one off if I remember correctly, then another 20 to get the new one installed. Replaced the thermostat and filled with coolant and was back up and running. I found a new Murray pump on eBay for around $60

[@yjandy7762]

Great job sir! I've done plenty of work on my older Jeeps but was a little unsure of working on my Chevy Avalanche I j purchased about a year ago but you've given the me the confidence to .This has to be One of the best and most thorough step by step automotive videos I've seen. I'm now a subscriber and will be recommending you to anyone else that may be tackling a project themselves.

[@backyardchevy328]

Thank you so much...i really appreciate it🙂

[@tonyb7748]

This video is amazing and well edited. I agree with the other reviewers as such. However I will be handing this repair over to the mechanic. As a small business owner and full time employee I cannot justify this amount of work for one part . I would also want the belt , tensioner and Rad/heat hoses replaced. Good stuff man ! If you have a patreon let me know.

[@backyardchevy328]

Thank you🙂 i really appreciate it..yea i see what u mean it does require a lot of time to do..but least u know whats involved..so they wont overcharge u

[@Token650]

Extremely helpful..I saw in other videos people put RTV and the gaskets. Is the RTV necessary? Or fine without

[@backyardchevy328]

They do that so the gasket doesnt move or fall off..if u can get away without using it..its best..i just use the bolts to hold the gasket

[@jenyminor]

Excellent tutorial video... amazing job! Thank you for posting!

[@backyardchevy328]

Thank you🙂

[@joebruiser7167]

Awesome content as usual. I send everyone to your channel for their automotive DIY needs. Thank You !

[@backyardchevy328]

Thank you so much, that really means a lot to me🙂

[@pcdetail602]

Great video. Would the process be the same for a 07 tahoe 5.3 vortex?

[@LOYALONESTILL]

Excellent clarity, explanation, shortcuts, which make it understandable to everyone. Nice job !

[@backyardchevy328]

Thank you🙂

[@db4652]

Gracias por la información muy buen video y muy bien explicado 👍

[@Gregasaki]

Damm dude, that’s one hell of a high quality how to video.

[@backyardchevy328]

Thank you🙂

[@mikegraham2929]

great job with the video, it showed me all I needed to know, thanks

[@sindelm7437]

Thank you for including torque specs

[@obatala721]

Bro thank you soooo mutch you took me step by step and I got it done you are the man

[@Ronald-rs1uf]

You are GREAT at what you do Sir. Thank you!!

[@derrickbick4066]

Did it with your outstanding video! Txs 👏🏽👏🏽👍🏽

[@AljPropertyServices]

Great job on the explanation, God bless

[@shadowopsairman1583]

Replace all those clamps with high quality worm gear clamps

[@Ferterpeep]

phenomenal video, ive never seen an automotive step by step tutorial done so well!

[@backyardchevy328]

Thank you🙂

[@EliasHernandez-ov2jz]

Thank you for the video I’m a moron but now I feel confident enough to be a confident moron. I’ll let you know here it goes 🤙🏽

[@dougarnoldi2332]

Bahahaha. Dont worry bro. You can be a moron. And still get it done right with this guys help. I know this. Cause i pulled it off. And im a moron to. Lmao. Just watch the video. If need be watch it several times and i have no doubt you will pull it off. Just like i did. Good luck bro

[@miketwilson]

Thank you very much for this video. I really like your style over some of the big brand store tutorials. I was just about to take my truck to the shop because I had to do the swap outside in 30-35 degree weather. It took me 3 hours with most of the time running in to get warm. Actual swap time was between 45 minutes to an hour. ( My fan was much harder to get off. ) Ordered Silicone radiator hoses with money I saved doing it myself. Thanks again.

[@backyardchevy328]

Great job🙂👍 thank you🙂

[@mikemartinez7135]

Great video man! I've watched a few videos and yours was by far the best. You saved me a lot of money thanks!

[@backyardchevy328]

Thank you🙂

[@JuanPereZ-ji1op]

Perfect video buddy just what I need it THANK YOU love youtube saves me tons of money 💴

[@dougarnoldi2332]

Wow. Just like all the other comments! This video was right on point very thorough i knew it was my waterpump going out. And looking under the hood was kinda overwhelming i was somewhat doubtful thatvi would ne able to pull it off. But with your help it really wasnt hard at all. You saved me a minimum of 600 bucks i cant tell you how thankful i am. And from now in i will HIGHLY recommend your videos to everyone. Again thank you so much your directions were very clear and easy to understand and follow. Great job buddy!!!

[@TheBirdandEagle]

Great video. Thank you. 😁

[@backyardchevy328]

Thank you🙂

[@rolsamaniego1894]

What if mine doesn't have a fan like that one does

[@josevelazquez5808]

Perfecta ilustración. 👍🏻

[@josephutuadoPR]

great job as usual

[@backyardchevy328]

Thank you🙂

[@bennymoyler4728]

Thanks for making this simple

[@jeffreya.657]

Yes Everything I needed to know. Nice Video Wrench sizes and Torque Specs. Awesome Sir.

[@johnnyconrad4859]

Good video I learned from replacing these pump to go back with gm parts. Aftermarket parts don't last and sometimes leak

[@morgansgames]

I will reitterate what others have said: thorough yet concise with just the right amount of details and demonstration with the important pointers and pitfalls to avoid. (I especially like that you included the different torque specs AS you explained the process of reassembly! Could I have looked them up, sure, but you were helpful and had them right there. Perfect!) Subbed!

[@martin81722]

I only have one doubt as i try my luck on replacing my water pump. Is there any glue used or lubricant on the gaskets?? Great video!!

[@kvkehoe7972]

Do you need to mix the antifreeze?

[@justinfisher8749]

Do you need to replace the thermostat with the pump or can you just replace the pump

[@backyardchevy328]

U dont have to..but they do wear out as well and no better time to do it...but u should at least replace the gasket though if u reuse the thermostat

[@justinfisher8749]

@@backyardchevy328 will do thank you for the quick reply/awesome tutorial

[@backyardchevy328]

@@justinfisher8749 thank you...anytime..glad to be able to help🙂

[@paul41770]

You give the best tutorials. Thank you

[@paul41770]

Thank you for sharing

[@backyardchevy328]

Thank you🙂

[@ronniehossain7500]

Very good video. Thanks

[@rogelioordonez777]

Thank you for making this step by step Instructional video Great job! Looking forward to many more. Again thank you & God bless you ✌

[@alexmata296]

Thank you bro! You just saved me a ton of time and money. I had had a mechanic install my water pump last but idk what went wrong. Anyways I decided to change it myself today and everything went as smooth as your video.

[@AcerArtsOfficial]

the only person to actually put part numbers!! thank you sir! I have a 1st gen ls water pump so I am double checking I'm getting the right stuff.

[@ChamuKING95]

Good video this was my first time changing this in my truck and I actually did it properly

[@jrfluellyn1077]

I appreciate you very much brother! Using your video, I was able to replace my leaking water pump. Peace & love to you and your family.

[@TheDragggg]

I was stressed because I’m suspecting my water pump has a leak, but with this video I’m confident I’ll be able to replace it successfully. Thank you!

[@AdrianHinojosa-w6f]

might be able to actually pull this off thanks to your video, watched every second of it

[@gaboi30281]

You didn’t mention the fan!!!

[@Pincheemoska]

Best video I’ve seen, thanks

[@kosydarskorner4833]

Thanks for the info. Ive found using a c clamp to hold the pully a very valuable tip!

[@jerraybrown1830]

This is the best video out on how to change a water pump hands down. I gotta give it a 9 out of 10 stars just because he didn’t explain how to put the serpentine belt back on lol but I figured it out. Gratitude

[@zeferinovega6450]

Great video thank you

[@nathanmrg2]

What type of gaskets did you use on this for the water pump? I see numerous metal ones with the acdelco kit. Is there updated gaskets?

[@thecuss6817]

Excellent video. I've done WP twice, on Yukon, same except had electric radiator fans.

[@scottstuart7847]

Great video and perfect tutorial! Also thank you for not using gobs of rtv gasket maker like most ppl do

[@roberttoomey1755]

Thanks , nice work 👍

[@juanbarrientos1588]

How many coolant is needed

[@paullancaster8877]

Nice job! Your video was informative and thorough. Thanks for taking the time and posting it!

[@Thankyou123-h3m]

Great help, thanks!!

[@fredjones1238]

like the clamp trick

[@pierremauge6734]

Thanks for sharing, great video !

[@backyardchevy328]

Thank you🙂

[@pgeraci]

Best video for this. And the clamp idea to remove the fan......wow. thats exactly why what i needed.

[@davidokeefe9303]

Thanks for this bud, gonna do mine tomorrow, wish me luck!

[@Jaeko8041]

Ya like step-by-step

[@davidokeefe9303]

THANK YOU SO MUCH FOR THAT C-Clamp trick!!!!

[@markknights7905]

Very nice video

[@tomference4618]

..very helpful!

[@exposethetruth2020]

The gaskets didn't need any silicone?

[@backyardchevy328]

No, i never like using silicone..if the surface is smooth and clean it works fine without any...but some people put it on the gasket so it can hold while u install the part..but it can lead to potential small leaks between silicone

[@brandondryer2172]

Thank you for the in-depth info you are a lifesaver I appreciate your work

[@haroldhamlin1172]

Great job😇👍

[@PNW_Wolfpack_Adventures]

Great video. I appreciate the bolt size and torque specs.

[@ryanwilliams1651]

excellent video

[@Soundafek]

Awesome tutorials, clear & precise Thank You!!

[@jacklyncipres1047]

Thank u

[@alejandrogaleana2555]

Exelente!!!

[@davidmendoza3746]

Does all coolant inside gets drained or just a portion of it? I believe my avalanche takes about 4 gallons of coolant. I want to make sure i have enought coolant to add once i decide to change the pump. Thanks for your video.

[@backyardchevy328]

Thank you🙂 no, unfortunately the engine will retain what's below the water pump level

[@davidpessina8099]

WATERPUMP REPLACEMENT. THANKYOU SO MUCH FOR THE VIDEO. AND FOR GIVING ME THE CONFIDENCE MOVING FORWARD. NOW IM GOING🙏TO SAVE FOR PARTS. BUT REALLY CALM APPROACH.WOW COME HAVE DINNER OVER MY FAMILIES FOR THE HOLIDAYS. WE NEED THAT CALM SPIRIT. T.Y.

[@backyardchevy328]

So glad to be able to help🙂 have a great dinner...hopefully all goes great on the repair

[@mikeneurohr27]

Very helpful and thank you for your time to help us out here. 👍

[@hanksta76]

Today I changed my water pump and thermostat. The thermostat came with a rubber o ring and a paper gasket. I used the o ring and there's still a leak. Should I try some sealant? Or the paper gasket?

[@backyardchevy328]

Well the thermostat housing that requires the o ring will have a groove in it for the o ring...while if the housing is flat then youll wanna use the paper gasket, you also wanna make sure that the water pump matches the housing ur using..some water pumps have design for the thermostat thats separate from the housing...so it may leak if thats the case