How to Replace Window Regulator 1992-1996 Ford F-150

Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ib/1AWR...
This video shows you how to replace both the window regulator and the motor on your 1992-1996 Ford F-150. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
1992 Ford F-150
1993 Ford F-150
1994 Ford F-150
1995 Ford F-150
1996 Ford F-150
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obhH/1A...
• 11mm Socket 1aau.to/obq2/1A...
• Trim Tool Set 1aau.to/o9e/1AX...
• T20 Driver 1aau.to/oDn/1AX...
• Socket Driver
• Socket Extensions 1aau.to/obq2/1A...
• Drill
• Gloves 1aau.to/oZM/1AX...
• Painter's Tape
• Safety Glasses 1aau.to/oSV/1AX...
• White Grease
• Chisel 1aau.to/okA/1AX...
• Hammer 1aau.to/oS4/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@armandoortiz7079]

Thank you for the clear and straight tutorial.

[@miltonjones8264]

Thank you so much for the help. I love watching this female mechanic! She is one of the best out there! Bar None! However, what size are the pop-rivets used to re-attach the window regulator? Thanks. MJ

[@geosynth7371]

Nice work, very thorough presentation.

[@itsmeagain8518]

A quarter inch drill bit or larger takes out those rivets fast. I always punch out the rivet studs 'first' to make drilling easier. I worked on Fords since the late 60's. Also, those regulators are spring loaded and can remove fingers if you happen to try to disassemble one!

[@lanethomas2037]

Tools needed needs to be updated to include rivet tool and rivet sizes

[@zjtr10]

Good job