How to Replace Window Regulator & Motor 2003-2011 Honda Element

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWR...
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 2003 to 2011 Honda Element.
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa/1AXA...
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Gloves 1aau.to/oa/1AXS...
• Painter's Tape
• Safety Glasses 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@thebadguy3764]

Just did my window replacement following this girls step-by-step instructions, she is bad ass!!

[@TRQ]

+The Bad Guy Thanks for watching our video, we are glad this helped you out! 1aau.to/m/Shop-TRQ

[@55chevyfish]

I was a mechanic for a long time. And around some of the best. This young lady is right up their.

[@rdrun51660]

I have watched a ton of how to videos for automobiles over many years. This has to be one of the best. Thank you very much!

[@bradrichardson8020]

I just finished putting a window motor drivers side on a 2008 Honda Element. Thanks to the young lady that showed this old guy how! My son will be happy I fixed this for him.

[@atticusharper]

Thanks to TRG i saved myself $450, I was able to order a regulator online, arrived in 3 days, installed in 75 mins start to finish. For a girl like me I'd say not bad!

[@yamanote1138]

Successfully replaced the regulator in my 2005 Element thanks entirely to this video. Excellent instructions! Made a tedious job feel easy :) Bought the part from their link, fit perfectly!

[@Sirach985]

Completed the job in maybe 45 minutes. Really appreciate the effort and time taken to show the process from start to finish. I remember watching you on another auto parts replacement video a couple years ago. You helped me a ton on that job as well.

[@zrex1244]

This video saved my bacon! Did the driver's side with no issues and now I'm on to the passenger side. Been driving around with my windows taped shut for far too long!

[@tonygrange9799]

Hey thank you SO much for this! I did it in a couple of hours, with no missing or extra parts! This is so SO f'in wonderful - you're the best!

[@lindafisher7731]

Your amazing! I’ll be watching this as I attempt this . Thank You!

[@rkardos4220]

Great video. Problem I had was I was going away and window opened but wouldn’t go back up, so I took everything apart and propped up the window. Came back and kind of forgot where all these screws went. So your video was an excellent lesson on the whole process. Thank you

[@omanstyles2449]

Amazing video and skills. Very clear to the point and no.messing around! Kudos to you girl extremely helpful!

[@vorpalskies]

Thanks for the upload, this video helped me replace my window regular in less than an hour. 👍

[@MrPterry]

Great video- Detailed start to finish but to the point. Saved me a lot of money thanks!

[@Valleyreb]

Fantastic step by step video!! Thanks for helping me save some $$

[@larryhickey4414]

Thanks to this video I did it!

[@andiman45]

its amazing how plastic becomes brittle with age. Expect to break tabs etc

[@patmurphy2687]

Just what I needed to do the job THANK YOU!!!!!!!!

[@emiljustian977]

Thanks soooooo much.

[@stephenbamford]

First rate! Impressive!

[@erin3506]

Great video- thank you for the instructions!

[@coconutswirlgirl]

Thank you, got it done with your help!!!! 🎉 I believe that this car i worked on was a different year, as some of the things were different. But still, this was so informative that I was able to figure it out. 🌺👍🏽

[@leahlapp3660]

THANK YOU for this video! So grateful

[@shawnstangeland3011]

Thanks

[@stevenlengua4179]

Really hard to line up the driver side door frame back up. The speaker mounting sticks out and doesn’t allow you to do it straight on. You have to sort of angle it to get it in. Really difficult. At least for me. Window is going down rough because of it. But all in all the job is done. Thankful for your video!

[@tommynorton8973]

You know guys go through step by step but to fast, i wish to commend on a job well done not to fast not to slow just right,thank you!!!!

[@frankfitzgerald4536]

Nice job. I detect a Massachusetts accent. Am I right? :)

[@mattfoley6082]

Apply lube on new regulator track and/or cables? My old failed one has a white grease lube on the track but the new regulator has no lube.

[@lokkju]

Is there any reason not to move the regulator down to the lower position to loosen it during removal?

[@davidboda1640]

so when windows is stuck in up position is it regulator need replace?

[@xotzinome]

I need help, I plugged it in to make sure that it worked before I attached the window huge mistake, the problem that I'm having is that it was working just fine and then it just quit. It worked the window went up but it won't come back down now nothing's working. The fuse is fine. I replaced it anyway and still nothing. So now I cannot attach the window to the proper part because it is all the way up so it won't allow me to line it up with the bottom of the window. It wont work regardless. I cant find any info online as to what this could be.