Honda Element-- How to Replace Window Regulator Motor 2003-2010

Step by step how to replace the window motor regulator track in a 2003, 2004, 2005, 2006,2007,2009,2010 Honda Element.
Driver Side Window Regulator --- amzn.to/358soIZ
Passenger Side Window Regulator --- amzn.to/3k97fCS
Door Panel Clips --- amzn.to/36tZ935

[@paulwies4442]

I found this video to show clear, step by step instructions on how to replace your front window regulator on a Honda Element. Tools need: 3/8" ratchet and 10mm socket, flat blade screw driver, phillips head screw driver. There is nothing complicated. This video relieved all of my worries of "what am I gonna do because my window fell down inside the door" Thank you for taking the time to make this awesome tutorial.

[@DIYHonda]

Glad I Could help!

[@64arguz]

I fixed mine following your indications , excellent video, thanks !

[@glendepasse7490]

I replaced this unit on my Element today and watched four videos just to make sure I knew what I was doing. DIYHonda was the best. Everybody else totally missed the step to plug in, power up.. then position the window holes, unplug, bolt the window in, secure the door panel pieces and relax. Thank you DIYHonda!

[@davidhayslip4688]

This was so well done. Whoever you are, may all the gods bless you.

[@DykeHensen]

Excellent DYI video- thanks - saved me a lot of time

[@todayu]

Life saver! I was halfway through a 10 hour road trip when my motor decided to give out...while the the window was ALL the way down. No way I could drive 5 hours in that condition. Thankfully, I was parked at a Flying J so I was able to buy all the necessary tools inside. "Fixed" the window right beside the gas pumps as the sun went down. And by fixed I mean gorilla taped to the frame haha. But hey, at least I don't have to worry about things flying in my window while I'm driving. Can't thank you enough for this excellent tutorial. Alrighty, time to get back on the road. Wish me luck! PS - I am not handy at all. This tutorial was just THAT good :)

[@edyoungblood6826]

Solid video! Made the replacement super easy and I felt a lot more confident going in!

[@DIYHonda]

Thanks so much! Much appreciated! 🤙🏽

[@Golyamkur]

Good job, finally someone not yapping for ten minutes before starting the actual job and doing a nice job narrating. Comprehensive, precise and detailed! You're hired!

[@dannydebonis]

Removing that connector @5:30 was a real doozie. Thanks for the video.

[@feralcatbox]

This should be the gold standard for tutorial repair videos! Thank you so much! If you need to pick up this part locally, I used a Dorman Window Regulator #748-132 (for the passengers side, #748-131 for the drivers). Hopefully your window regulator fails on a sunny day. ;)

[@OkieBobby]

Fixed the drivers side window regulator today. I watched about three videos before finding yours. Glad I kept searching, since yours was the best for my situation. All I had to do was just follow your lead. Many thanks! FYI: Dealer quoted $500. Thanks to you and others like you, it ended up only costing about $50 in parts.

[@TommyMondayz]

Thanks! Made my life a whole lot easier. Excellent, helpful, nice camera work. Very well produced.

[@NymeriaDT]

Excellent video! I just had to do this for my car, and followed your video.

[@edyoungblood6826]

Really well done video! Thank you you for putting it together. I ended up getting some double sided trim tape to reseal the vapor barrier - 20 year old car. Used #2 adhesion level.

[@DIYHonda]

Great idea! 🤙🏽

[@JasonNewmarch]

Saved me 300! Thank you so much- it really wasn’t that hard at all

[@jbuss357]

Saved me $300, probably the best walk through of how to replace a part ive seen

[@jasonsanders8202]

Thank you for taking the time to film this.

[@kaylynn143]

Just used your video to help me through changing out the window regulator. Excellently done! Saved me about $350 and a lot of vivid language.

[@jeffreydebos3788]

Needed this video the other one I watched was for the passenger. This one is so much more detailed.

[@williambranham6249]

I had to replace this regulator about 3 years ago so I needed a refresher course. Yours is excellent. My wife and I did the repair this morning and we're still speaking. We work differently in that she likes to use a ramrod to put things together and I'm more a look at the parts king of guy and carefully then put them together without force. Of course on occasion some force is needed. I'm always amazed how much design and engineering goes into car manufacturing to make things fit together in such a compact package. I assumed the motor in the regulator was bad not the fact the cable had failed. Again thank you.

[@shawnbrauch2424]

Very impressive directions! Could not have done this without you! Well done! Thanks

[@ibloodbender]

thank you, you’re the only video i found that actually mentioned how to fix it if the window was stuck up and not coming down 💯

[@lydiay5532]

Thanks a million for the walk through! The hardest part about the whole thing was doing it in 100 degree Texas heat. ;-) Honestly, I’d rather sweat than shell out the $300 to have somebody else do it. Cheers!

[@brotoriousone5735]

Nice move taping the window up, wish I would have watched your video first before I got as far as I did

[@gugorinousa]

I just want to say thank you for your videos. It just help me changed the window regulator on my Honda element 2006. I appreciate it. Your videos are the best ..... You saved me 550 dollars.

[@ChefMatthewWeber]

Great tutorial!! ITS ALIVE!!!!!!

[@yal100]

Best replacement video for this out there. Thank you So annoying that the default fail is down 😢

[@jaimesalvat5464]

excellent description of the procedure

[@nahmean7036]

Thank you for taking time make this video sir.

[@2SixString]

Thanks so much for posting! This saved me over $300 in relation to having it done by a pro mechanic.

[@rossbannister8411]

Done and done. Great video. Thank you for posting.

[@DIYHonda]

Welcome!

[@morgasmic83]

Thanks for your thorough walkthrough. You saved me a good bit of trouble!

[@evil_hugh]

absolute legend. saved me so much $$

[@StarkeBill]

Thank you so much! I’ve never done something like this before. Your clear, easy to follow instructions made it all go most smoothly for me. Again, thank you!!

[@tomw5318]

Thank you so much for this video! You saved me time and money, and I want you to know that you’re truly appreciated!

[@kevindwyer6618]

Just wanted to say thank you saved me a ton..did it myself..great video

[@prestonphelps8497]

You were very detailed . Thank You very much for this info. May you prosper.

[@MichelePollock]

Thank you for posting this video!

[@DIYHonda]

You’re Welcome :)

[@MrRogerCorby]

Just complete the repair. thanks

[@jacobgeoffroy6914]

Hey, I just wanted to tell you your video on how to replace a '17 or '18 honda side mirror saved me $700 so thank you. I was wondering however if you could make a video on how to replace the mirror's cap?

[@MS-ot2cz]

Great video. I’ll be doing this as soon as I receive the new regulator. Thanks!

[@MS-ot2cz]

Thanks again! Just finishing up the install. Other than the California heat this wasn’t too bad at all! Way less daunting than I assumed it would be.

[@fixcar111]

Excellent tutorial, getting ready to do this. Thank you!

[@jacksonhoboken]

Good video, thanks for making this

[@tjliebmann2177]

Absolutely TOP quality work

[@tuckedandtruckin]

Awesome Ty Just finished

[@barbaralallegranzi3791]

Excelenté! Thank you!

[@vwscottvw]

Well done!

[@elizabethgillespie1716]

About to attempt this. By far I feel the most confident after watching your video. But am I correct, 10 mm wrench is what I need besides screwdrivers? Thanks!

[@airplanemechanic5561]

Thanks bro!

[@JUDDLILIHA]

THANK YOU....

[@TheMike941]

Good job bro!

[@alohabychoicefa9968]

Would you be able to show how to disinfect the AC system or location of the blower on 16 civic

[@barbaralallegranzi3791]

Will let you know when complete...