How To Replace Your 2009-2011 BMW 3-Series Front Bumper Cover | DIY | ReveMoto Painted Car Parts

[@ReveMoto]

Thank you for watching our video! If you need a brand new high quality painted bumper: Where to buy: bit.ly/328iFrontBumperCover Check us out for any other painted parts you may need: Visit us at : www.revemoto.com

[@AugustDreamScape]

Thank you for this! I just bought my first 328i & it's the first car to really get me into working on cars, and I've loved watching tutorials on working on these cars.

[@ReveMoto]

We're glad we could help! The 3-series is such a nice car and there is so many engine and exterior mods you can do to make it looking so nice. Thank you for watching!

[@recovery116]

I liked video purely because there are no dislikes. Keep it up brother.

[@ReveMoto]

We're still trying to make these videos better, so we appreciate the encouragement!

[@lareinajoy]

This was a great video. Excellent work and directions and quick to the point.

[@ReveMoto]

Thank you Lolo! If you have any questions please reach out to us and if you need any parts for your car. Reach out to www.ReveMoto.com

[@TheDuffguy619]

Great video. I have to change the ambient temp sensor. Thanks!

[@ReveMoto]

Glad it helped

[@FahadKhan-fq4zw]

Hi , really good video , could you please post the link or picture for the headlight washer Nozzle cover. I have replaced the number but not sure what shape of cover I need for the headlight washer nozzle hole on the bumper.

[@ReveMoto]

So for that you need to supply the VIN number to dealership to get correct one. There is a few different options. Go to www.ReveMoto.com chat or fill out the parts request we will find it for you. We will also paint it so you don’t have an unpainted one

[@mickstick2830]

I hope you found that CLIP at 14:01 that fell into the bumper :D Nice video tho ! thanks

[@ReveMoto]

Yeah we did a little banging and heard it ahha.

[@슬가생]

This is the video I was looking for. Thank you

[@ReveMoto]

Glad it was helpful!

[@ozarkdaredevils]

Nice video ...... basic and simple . Great job !

[@ReveMoto]

Thank you for the support!

[@ozarkdaredevils]

@@ReveMoto Your welcome ..... best how to video I have seen .

[@ReveMoto]

@@ozarkdaredevils Appreciate ya!

[@ashereid2022]

What does the interchangeability between front bumpers look like based off year? I have a 2011 328ix but I know it can fit parts from other models/years. Can’t seem to find a handbook on what those parts are though. 😬

[@ReveMoto]

Hello Ashe! Please message us and we can try and help you out. Just mention you are from KZbin. Basically, if the fenders and hood are the same style/fit, then you can swap the bumpers out. Usually, folks will get the M-style bumper. I hope this helps and please subscribe, it helps us a ton! 🤘

[@laquitaboles3145]

Hi, the piece that holds the fog light do you carry that in stock?

[@ReveMoto]

Hello Laquita! There are two pieces, the bracket and the fog light itself. Unfortunately, we do not stock either. Please chat with us at www.revemoto.com and we can get you a fog light with the housing (one piece). The bracket (the piece the fog light screws into) seems to be part of the bumper and we do not have that. BMW may have the bracket but it looks to be part of, or glued to the bumper. Thank yo for watching!

[@artuditu4725]

Dude,your previous bumper doesn,t have a washing sistem for the headlights like a neweone?

[@ReveMoto]

Hello. This particular customer purchased the bumper online and chose the wrong bumper. He didn't have headlight washers. He opted to just get the covers on instead of getting a new bumper without headlight washers.

[@miraclejayyy9457]

Can the headlight be replaced with newer model ones ?

[@ReveMoto]

Yes, they can if the shape and plug are the same. There are a lot of different options to choose from. Just make sure the lights are compatible with you particular 3-Series. Thanks for watching!

[@daviddorado5632]

can I replace on a 2007 pre-lci put this bumper?

[@ReveMoto]

Sorry that I would not be sure as there might be holders that maybe needed.

[@l3bronthebeast]

i have a gap between hood and bumper

[@ReveMoto]

Hello! Try adjusting the hood bolts and moving the hood back. You may want to also check the bumper and be sure it's properly installed. Sometimes the rebar or headlights will stop it from sitting 100% snug. Please subscribe, it helps us a ton! 😃

[@bobbygarcia3595]

Will this bumper fit an 08 e90 328i sedan?

[@ReveMoto]

The BMW bumpers come with quite a few different options. If you can grab the part number, we can definitely send you the link to the one that's right for your car. Sorry couldn't be of more help!

[@BIGGEST786]

Cheers from uk

[@ReveMoto]

We are delighted we could be of help!

[@ericcoleman6281]

GREAT JOB !!!

[@ReveMoto]

Thank you! We're here to help.

[@danuttz749]

She

[@moneymusso6524]

ayyy i got the same color

[@ReveMoto]

It's a very cool color! Thank you for watching!

[@Sean_0109]

Pretty easy to do? I’m swapping my front and rears and putting new headlights let me know if I can do it myself so I ain’t gotta spend my life on it 😂

[@ReveMoto]

You can do it! It just a several bolts and some clips. The headlights are the same plus the wire harness. The rear bumper follows the same concept, except there may be a few bolts when you lift trunk. Good luck and thank you for watching!

[@Sean_0109]

@@ReveMoto thank you so much

[@karinbran3707]

Will a 2009 bumper for 328xi fit on the same model but 2011?

[@ReveMoto]

Yes, I believe it would. BUT, DO NOT TAKE MY WORD for it. Double check with the BMW forums and do you research. The adjacent parts look to be the same. You want to definitely see if the fenders and headlights are the same shape. Folks convert to the M-style bumper all the time with us. Double check and good luck!

[@karinbran3707]

@@ReveMoto thank you