How To Reprogram Keypad For Garage Door Opener

[@raykohnert2588]

I spent a minute and a half reprogramming, (most of it climbing a 15 ft ladder),but probably 20 minutes looking for a simple, quick, to the point video like this one. I don’t know why there are so many long winded videos for something so simple.. Thanks

[@paulweston8184]

You must have a really tall garage.

[@ChrystianGuy]

Thank you! My wife spent 2 hours on this and I fixed it in 5 minutes. I was a hero for a few milliseconds ;)

[@nathandodge1004]

The simplest way to reprogram your key pad I’ve seen. Worked and I’m ecstatic

[@liquidsteel8131]

It took me longer to get the ladder out than it did to fix my opener. Thank you for this video!

[@thesaxist02]

Works like a charm. Keep in mind that you must firmly and slowly press the numerical buttons one at a time (on my model at least).

[@johnspears8686]

😊

[@luiscotto8405]

Boy! The instructions on the key pad were driving me nuts! Then I found this video. So simple n to the point! Wonder why the manufacturer makes so difficult 🤔 n it doesn't work anyway! Thank you sir! Keep up the good work!

[@ginariehl6039]

Thank you so much for this video. We accidently cleared the code and I wasn't sure how to fix is. God Blesd!

[@tomsut123]

I think there is something inside the motor keeping it from receiving the code the light will not flash on the motor after entering the code but the remotes work great and the sensors are lined up! what can I look for inside the motor to make it accept the key code? THanks

[@RrR-qb9cs]

Thanks for the video. Bought a house where the previous owner did not know the code. Better then buying a new one!

[@starlynn1214]

Thank you! Your instructions worked on the first try! And I have a Liftmaster, not Craftsman. So easy to reprogram the keypad and remote.

[@juliestrier]

Totally worked for adding my garage door opener and changing the outside code. Thanks for the tips!

[@vednar99]

Thank you! My programming stop working after 18 years! I added MYQ and the keypad stopped working. And MyQ works great, except for when I leave at 4:30am in the morning! So to fix this fast was nice. Much Appreciated!

[@generalwashington978]

Evening do you know if I program my keypad on my garage door would it interfere with my MyQ that I have now

[@Spaciousness1]

Thank you for your clear, concise explanation. Worked perfectly.

[@quadtos857]

LOL!! "For anybody who is a thief, I am going to change that code." Love it!!

[@jltaviation]

Short sweet and down to the point. Your technique worked for me ready to go thanks a lot

[@GreekLightningGirlDad]

Thx 🙏 this was easy and worked. How do I program the garage for a loaner car?

[@DevinAK49]

Thank you. I didn't expect it to be that easy. I popped a fuse and had to reprogram all of them.

[@barbara8802]

2024 …..Why couldn’t the written instructions be so simple!!! Thank you!

[@rh3263]

Hi there. I just change the code as you said step by step but now after 10 minutes the new and old code is not working sound it has been not save can you tell the reason why or am I missing any steps? Please advise

[@nicksayan8631]

This guy is the goat

[@roun0016]

Thanks. Worked like a charm on my chamberlain

[@LeeTaiKwun1668]

After setting a new pin, will the garage door opener works on the new pin too ? Please advise. Thanks

[@HouseImprovements]

In this video I am showing you how to make the opener recognize the new pin.

[@angeladavila7305]

Thank you! Simple and straight to the point!

[@GromeMoose]

Awsome vid thanks so much just fixed mine. Stay healthy and safe.

[@Ric-Roze]

We bought a camera system from a local store back in 1998. It put a stop to most of the deviant behavior from the neighbor's that cant keep their hands off of someone else's stuff. We discovered that we were being watched, our going to and from work ect.

[@ELKASIDAV]

Hope all is well for you and your loved ones, I am very grateful for this tutorial , it is very simple and helpful ! Jesus Loves You!!

[@basharatnazeer4697]

Thanks buddy, by your video i was able to set up garage code today.

[@Maxid1]

1:18 Plot twist, while you're pressing the remote and learn button in the garage, the toaster and microwave begin planning the next break in....

[@dlg521]

Great video and I got mine to work but NOW the garage door opener button in my Grand Cherokee no longer opens my garage door. Any idea on how to have them both work with the same door opener?? :)

[@HouseImprovements]

You will have to look in your user jeep manual on how to program the vehicle buttonbut it will be similar steps to this.

[@anthonytran7131]

Will this resets all my other stuff that is already programmed?

[@HouseImprovements]

it should not

[@HouseImprovements]

it should not

[@sammibyrd6131]

Thanks! It literally took me less than 30 seconds to reprogram my remote.

[@johnstern6676]

Question - if you change the battery in the keypad, do you have to re-program the keypad?

[@HouseImprovements]

no not usually

[@mecca9818]

Took me less than 5 mins, thanks to you ❤️❤️

[@MargaretWilson-z7h]

Hey I changed the code on my door and both the old code and the new code work, how do I get rid of the old code? Thank you

[@HouseImprovements]

kzbin.info/www/bejne/p3a0lKptnb5leqM

[@DanZCoffeeWithKenobi]

Great help!! Thank you!

[@Nate-Turner23]

What if you don’t have an enter button?

[@Allan-et5ig]

HouseImprovements - Dude, immensely helpful and money-saving. Immense thanks!

[@vivinthomas1]

Can you pleasse tell what is the opener Id# for a legacy overhead garage door. I am having a difficult time trying to program my keypad to legacy door

[@HouseImprovements]

sorry, I do not know.

[@sweetenuf2007]

Can u have both the box and the key fob set at the same time and if so how is that done? Do u just have to do then at the same time?

[@HouseImprovements]

One at a time

[@NDWoj]

Need to reprogram pad. If I reset, will it affect the car openers?

[@gmamabear3619]

It did mine. Trying to figure out how to get them to work without interrupting the keypad. Ugh!

[@leighpotter8735]

Thanks your video. Simple to the point and it worked.

[@whoareyal]

Hi, I have a quantum, the clicker remote can only open the door garage but can't close it. Please help me. Thank you

[@HouseImprovements]

The problem is usually due to one of these: the safety sensor eyes are blocked, dirty or have loose or damaged wires near the sensors themselves or where they attach to the motor , or faulty motor control board. I would start with looking at those things.

[@whoareyal]

@@HouseImprovements thank you I'll try what you said

[@StinkyPony34]

Thanks for being quick

[@TomL3grandsons]

Thanks. Your video helped me fix the problem

[@patribtr]

Thank you for your video it worked perfect! Where would I be able to get a cover for my outside code box.

[@HouseImprovements]

No idea

[@wendy833]

Home Depot or Lowe's sell the remotes and outside code with cover assembly.

[@oskardogrushfan]

10th, woo hoo! The ones integrated into the cars are a real pain, especially the Ford system.

[@godsforces1776]

Thank You , Keep Up the Good Works

[@robertberin4872]

Program the key pad: 1.Hit the purple button 2.enter 1234 (if not been programed before) 3.light on opener flashes 4. Repeat steps1-3 to program you own code replace 1234 with your own.

[@LeeTaiKwun1668]

After setting your own pin, will the garage door opener has learned a new pin is in place ? Please advise. Thanks

[@Rowzek]

Hey man, what camera are you using? It is incredible clear!

[@thebigmann81]

What if key pad doesn't have a button that says enter ?

[@comehere8334]

This guy is awesome! Everything he said is complete success!

[@Kelowna_Kevin_Snaychuk]

Moved in to a new house and the old owner never told me the code or anything about the garage door. Will this still work if I don’t know the current code!?

[@HouseImprovements]

Follow this video first kzbin.info/www/bejne/p3a0lKptnb5leqM to remove all codes from the opener and then re program all buttons or key pads using this video you commented on.

[@ediewilson9279]

Do you know why using an overhead door keyless entry will cancel your remote? And the same reprogram the remote and its cancels the keyless entry?

[@HouseImprovements]

Sorry I do not

[@bsrok2]

Hello! Not sure if you'll see this but I have a question. I was looking up how to reprogram my garage door openers because my garage door keeps randomly opening, I think because one of my apartment neighbors has an opener on the same frequency. Something I found said reprogramming all my openers will fix this. But now I'm seeing other sites saying this will not fix it because you can't change the frequency. Any ideas?? I'm extremely lucky nothing has been stolen from my garage because it has been left open for hours and possibly overnight!

[@HouseImprovements]

Use the "learn " button on the head unit in the garage to change the remotes. If this does not work you may want to switch out the head unit for a different one and sell the old one?

[@bsrok2]

Thank you!

[@MrPlunto]

Simple but informative thanks 👍

[@HouseImprovements]

Glad it was helpful!

[@mikeroberts4858]

Great help! Worked immediately. Thank you!!

[@jonathanclarke9005]

Great help - thanks man!! 😊

[@shill7848]

How do we set multiples cuz it knocks out one remote that was already set

[@HouseImprovements]

once you delete all remotes just follow the relearn steps for each remote you want to add.

[@shill7848]

That worked! Thank you very much for your reply & video!

[@shanesigler359]

Great video worked the first time I tried

[@ntomlin5336]

Worked liked a charm!! Tjx you

[@johncapista]

You forgot to mention the troubleshooting where your press each number to see if the light turns on. As I did, I realize the number 5 did not light up so instead buying one at Amazon like you suggested. I changed the code and replaced the 5 with another number. Add it your videos.

[@Quinterotheis]

How do you set the one button close feature on liftmaster

[@junezalukmoore]

There is an inside button on the door to the kitchen. Once setting up the outside keypad, what about the inside button. Can I do that separately next or does it need to be done?

[@nicoleruiz8924]

What do I do if the old code still works? How can I delete the old keypad code?

[@jbucks166]

Original remotes lost. Adjacent opener in garage remote attempted to be used (3 button remote) main button opens one door and I'm trying to set the second button to open the door I lost the other remotes for. I'm able to reprogram my remote/second button to open n close the door but it disconnects from the keyless entry pad. I reprogram the entry pad and it disconnects from the remote. Both will not connect at the same time.. Any ideas?

[@HouseImprovements]

Try programming both at the same time

[@simpalpreetkaur4435]

Confused should I get a wooden garage door or insulated door ?

[@hayyanah1980]

I will try this today as we do have this keypad in our garage but never used it and i am hoping it will work. Btw if i did hold the reset button does it will affect my garage holder transmitter? As i am afraid it might affect the transmitter which i amnusing if i am inside my car.

[@HouseImprovements]

it should not clear your other transmitters

[@hayyanah1980]

@@HouseImprovements I end it up replacing the older one coz it was actually rusty and super old. I manage to follow your instruction and work well. Thank you so much.

[@ladykreme7433]

I have the exact same garage opener as you do. And I can’t seem to program my original remote and replacements. Does the garage door have to be open or closed while or framing the remotes?

[@ladykreme7433]

Programming**

[@HouseImprovements]

should not matter.

[@HouseImprovements]

change the batteries in the remotes?

[@perimbieclarise5696]

Works perfectly for me, thanks

[@Gale4ce1]

So after doing this will the visor remote continue working?

[@HouseImprovements]

You will need to reprogram it also. Most are just like the key pad i did.

[@simpalpreetkaur4435]

Can we put a led bulb instead regular bulb in the craftsman

[@Iisidjenejiirjrkgawdcv9888yyyt]

So the one my grandparents have, the sprocket on the stop snapped off. I would do a check on that every couple of months. This is a 1999 model, not surprised.

[@sherirsunshine]

Thank you!! Worked like a charm

[@MrXxanthonysxx]

You might want to add to add a keyless entry to program w the over head door closed on some garage doors

[@cinditoledo1160]

My garage door keypad doesn't have an enter button. Usually the "0" is what makes it close, but the 0 didn't set the code. Any suggestions?

[@HouseImprovements]

Sorry ,I'm not sure?

[@Healthyhamms10]

So will this work if you don't know the master code? Neither my realtor nor the owner knows the pin code .

[@alirE2904]

Just what i was looking for

[@furtalance_x]

Thanks for this. Il have to try this with mine. It wasnt stolen or anything but it definitely has forgotten my code. Made me question my sanity the last time i tried 2 million times the same code that worked up until 2 days ago.

[@averagejane09]

sigh...I don't know how to locate the learn button on the unit with the lights in the way on both ends and I hate heights so I can not stay up there long to try to figure it out. Yours is already exposed. I wiggled the light cover and it didn't budge....which end anyway? Update...I pulled the light cover downward like a hinge but naturally checked the wrong end first....ugh.....I dislike even small heights....but there it was. pushed it back up and it was pretty quick. Glad that is over with.

[@lilihernandez8754]

I actually don’t have a keypad for my garage it’s just a button would it still work

[@chriszimonick413]

Thank you! Thank you! So easy 😊

[@acunchevy54]

Fast and easy. good video.

[@HouseImprovements]

Thanks 👍

[@SunSimLord]

Thank you so much Sir. Excellent job. Just Subbed 8.4.21 ✅

[@EmmyS247]

Great video, short and sweet. It worked for me, thank you!

[@solangebarretto8105]

wow, I will try it. I need a key pad for my garage door

[@withoutpassport]

You ate all the fricking chips Kip! …Gawd!

[@Chuwks1991]

You are the man !

[@gilbertopatino2616]

Thank you very much 🙏 great video!!

[@torilee27]

New home owner. Need to change all. Which do you do first. Press hold for 6 seconds erases both remotes and code??? Help!!

[@241troystreet]

I’m a new home owner need that answer

[@jdmchickkustomz9417]

So why did this and it didn't fix my problem the old code is still working and now my new one works too

[@HouseImprovements]

You are correct there is a separate video for clearing the old codes , this video was just for re programming new devices. Here is how to remove devices:kzbin.info/www/bejne/p3a0lKptnb5leqM

[@jdmchickkustomz9417]

@@HouseImprovements thank you and do you have a video on how to clear old garage openers because one of mine was stolen as well as the code

[@CarlosArias-qn1or]

Thanks man good tips

[@motheroftwo2288]

Thanks; fingers crossed that this works for me. Going to give it a go this afternoon.

[@eagl0215]

How do you reset one that has no star or pound key?

[@edwinwalker2723]

I have a craftsman opener that I'm trying to program a keyless pad. Everytime I do the code the light blinks 4 times after about 30 seconds.I don't know if this is some kind of code. I tried the instructions on the keyless pad and I tried this way. No luck. Help

[@HouseImprovements]

Hmm not sure. Usually you would press the learn or program button on opener then enter code into keyless pad and press enter. The light should blink right away to confirm programming.

[@edwinwalker2723]

I'm going to talk to a tech at Over head door. I think it's some kind of code. It might be a defect in the opener. Thanks for the help anyways.

[@brad3201]

I have the same keypad and garage door opener! Thanks

[@joey5952]

What a life saver. Thank you so much!

[@peterpizzo4732]

What if you don't have a enter button

[@jmspr1]

this guy is good

[@thomasruffin9105]

My grandpa uses a 6 digit code,but the keypad says only 4 digit pin,do you haft to bypass something to use a 6 digit pin

[@doctormomschouten6513]

Thank you! I had to hold the enter button longer than I thought, but once I did, it worked!