How to Reset all Control Modules and ECU’s in your Mercedes!

[@jamesthunder7590]

Hello from Sweden 🇸🇪 Nice classic old style Mercedes Benz design = ( Bruno Sacco. Mercedes chefsdesigner 1970- 1999 .😃)

[@albenjgaudiel]

Hey, great video. I just wanted to clarify that ETCS is actually Electronic Throttle Control System.

[@arlyncole3937]

Yes

[@JettaRedIII]

iCarsoft MB V3.0 is much better. It is faster and will automatically identify which modules have DTCs (error codes). Whereas the MB II requires you to look at each module separately to see if there are any codes. The automatic scan with the MB II is only used to identify which modules are present.

[@sonofaleph2140]

I just received my MB v3.0 today, and already downloaded the newest software. Seems like a great tool to have.

[@FunAllDayLong4353]

Great video - thanks for that. I was going to get a generic bluetooth OBD2 reader hooked up to a laptop and OBDwiz software for my SLK. I'll probably get this one now.

[@paulbingville6485]

The MB II diagnostic scanner itself is a very useful tool. The printed user manual that comes with it, on the other hand, is out of date and incomplete as is the currently available version of the update tool software, which makes it difficult to find an use some of the scanner's features. And, just to make matters worse the PDF version of the user manual that's available online is even older than the printed version.

[@Deathridaz714]

I feel like I got the same problem. I'm not sure it reads all the sensors like it actually should? Works decent enough but I'd like the maximum use out of it. Did u figure how to update the software? Hopefully someone makes a video....

[@Jacek-Paradowski]

Thank you very much for the opportunity to watch this is a very great video. But I have a question. I have exactly the same model of this device and I want to know if there is a possibility that, after scanning the system, the device shows me only those things that require my intervention because they are damaged and need repair.I know about it because I have several devices that after scanning the car, showing only what is damaged shows a specific code, which is very convenient I do not understand why in Mercedes I need to search for what is broken in all devices that this car has, how everyone cares about this problem ?

[@Jimmy-ye1nw]

Very helpful, i will purchase that scanner, thank you

[@robertsessions8139]

Will this clear an auto lamp not working message?

[@TraciMann]

thanks for the help

[@bimbi1946]

Nice video, I am very interested in this scanner but I been looking online and many say that it only works on cars that are newer. My car is a 2000 s500. Does your particular scanner show my year model? Thank you in advance, I just want to be 100% that I buy a unit that will support my model.

[@GK7GARAGE]

There should be a list on the ICarsoft website

[@Unique_Lineage2]

Does this work if the Airmatic in the rear stays up? The front works but the rear stays up.😊

[@kevinmccrudden5699]

Can you read live O2 Sensor values with this?

[@persianchris2451]

I couldn't on my W220 2002 S55 AMG... and I have the better one (iCarsoft MB v2.0)

[@quintinnnnn]

Can you program fuel driver module on 2014 mercedes-benz mL350

[@electric8668]

I noticed it didn't show the W210 can someone confirm W210 is or is not listed as a model it scans specifically?

[@marvinlockman2960]

Nor the W208 CLK class

[@odhiamboambala2628]

Hi. My driver seat door controls are not working. What could the problem be? They were working recently.

[@SeanCallahan-s8i]

So I have the 05 c240 awd 4 matic im running a transmition fault light will this device fix that problem and if not will it give me more info

[@tuckin96]

Does it show airmatic codes? What can it do with the airmatic system?

[@GK7GARAGE]

It’s shows codes with airmatic system

[@danielquesadamartinez3550]

I am about to buy the Icarsoft because of a failure on Airmatic. My question is if it can activate valves, air compressor and reset sensors. Because if it can, the thing would pay for itself on one first work. Wait for y'all answers, thanks

[@EndofUSA]

where you buy it??

[@Ohwelll]

Can this check the abs and esc and srs on a Mercedes ?

[@wernerdanler2742]

I had to get rid of my 2001 e320 about a month ago because a few months prior to that I had to install a new battery. I also deleted an evap fault code with a Bluetooth to phone scanner. Even though I drove it over 200 miles it would not read 3 modules and so could not pass smog. A Mercedes specialist here could not get it to read those modules. Evap, an o2 sensor and I forget the 3rd. You are allowed one no read. The specialist said it was a problem with the ecu. Could this scanner have fixed this problem?

[@johnraike5043]

this video is very helpful thanks

[@s8nke]

Fantastic, thanks for sharing

[@MB212]

Thanks for video considering to buy one of this 👌

[@GK7GARAGE]

You’re absolutely welcome

[@keviin20061]

Hi, u have a clk320. I disconnect the battery to do some electrical work and then connect the battery and now my key will not even turn. What should I do. Thank you

[@joecool5477]

Does this work on 1997 SL 320?

[@cquates]

Hi, I have an 04 CL55 AMG . My passenger headlight will not come on . There is voltage but I don’t there’s enough to power the light . Will this scanner help?

[@chewsrise9439]

Does this MBII supports newer model of Mercs from 2011-2020?

[@GK7GARAGE]

Yes, it keeps getting updates

[@ashleytowle2793]

I am working on w202 1997 c280. I am having trouble findings the correct software to reset the ECU fault codes after replacing some parts. Can you suggest something that could work? Thanks

[@GK7GARAGE]

Unfortunately, never been able to find a scanner that works with w202 specifically, It’s in that transition period between obd1 and advanced obd2

[@MagesseT1]

I have a 1999 M-B Kompressor SLK230? Does the programming include all of the model years back to when these came out?

[@heamasilatu6902]

Great video, Was hoping you could help me out and give me advice. I have a 2004 Mercedes’ Benz c320 and I crosswired jump started my car and my reverse lamps won’t turn off at all and my battery won’t charge while running, when I took it to a shop they said they don’t know what is wrong with it. Another auto shop said I may have fried the ECM and wanted to know what to do. I am a college student in a small town and am looking to fix it on my own. Pls reply if you have any answers

[@jamesleming5303]

On my 2003 SL500 there's a fuse that blows when something like that happens. In fact the car has two batteries and two fuses. There are numerous videos about how to find and replace those fuses. See if your car has a fuse between the alternator and the battery. of course I'm answering 2 years after the question.

[@sandramcclendon4604]

So I am having this warning on my 2003 Benz E320 W before having my brakes repaired and the warning is still on so do I get the code to go away Please Help

[@anuradhasenevi6581]

I have a 2009 Mercedes C350. Would you be able to advise me with an issue on my car? When I turn the car off my throttle body keeps trying to adjust it self to what I’m assuming to the close position but it keeps going all night. It won’t stop and it drains my battery completely. Any suggestions to what the fix could be. I should tell you this stared to when I was on the highway on a really hot day A/C on my car turned off all of sudden due to overheating I pulled over to the side the fan kept running and when it cooled it started back up again. But did it mess up the throttle position of the car and now it won’t go back to normal? Would I be able to reset its position with this? Thank You! For your time😊

[@arewefree]

I am getting that tool, lol ... Sensesomatic brake control, does that reset the internal counter on the SBC? I've had the red light red brake light come on the other day and was happy it came back to normal but why did this happen? It did lock me in park and then wouldn't let me shift the car. But luckily it was temporary. I've checked for recalls and there are some ground wire that has been a problem that's connected to the SPC . will that ground wire cause of red light brake problem to come on? Or could it have reached the limit on the internal clock?

[@nbeny0926]

can it fix errors or can you download update to your car when you replace electronic or electrical parts ?

[@chrisbandy5961]

Control modules and ecu's are the same thing. But your caption states how to reset control modules instead your showing us how to delete codes. Totally different. We didn't learn anything watching your video.

[@raygodbout]

Got one to clear codes on my 2019 Mercedes Sprinter. But they don't tell you that it doesn't cover that year. Disappointed!

[@garrettgiuffre5653]

Try a previous year model

[@susanalima9916]

Hi does this tool works with 2003 cl 55 AMG? Thank you

[@paulgill7222]

Can I use this tool in the same manner if I'm replacing my ecm? Thanks

[@anthony08330]

Could this deactivate a sis tele aid malfunction

[@B_R_I_A_N_108]

I have an s500 ‘98 the ECU is not communicating with Reader Starts and drives it’s not shifting

[@allanriches9381]

Looks a easy to use reader

[@mihaimoro4418]

Hello. Do you think this will work without reprogramming on a Mercedes S320 2006? I want to mention that the replacement is a exact same model second hand and it also comes with two keys and immobiliser. Thank you !

[@Poppie-man-myth-legend]

Do you know what scanner I would need for a 1999 mercedes E320 to reset transmission to get out of limp mode?

[@vrossi2596]

Hi, does this work with the W208 Clk430 as couldn't see it listed on your video.. thanks

[@GK7GARAGE]

Not the 208 for some reason

[@tbogt98]

Have an abs/esp fault warning in my w219 06 cls55, will it read and clear those codes? Thanks in advance!

[@GK7GARAGE]

Yes

[@adventurousairman]

It doesn’t work on the W210 chassis

[@oliverogara5588]

can you erase fault codes with this? I have false error codes and they need erasing for my car test!

[@VITOSGARAGE]

Hello sir. Why a lot of scanners are missing W210? I can't find a scanner that will work with W210... I don't know what's going on. Any ideas?

[@GK7GARAGE]

I was wondering same thing, not sure

[@Norseman220]

I used to have a W210, and it did not have the standard 16 pin OBDII plug. Instead it had a round plug in the engine compartment with a lot of pins. That may have something to do with it.

[@saulmunoz5754]

You gotta get the adapter for it and plug that into the scanner, then the pin compartment

[@jn3750]

Is it better than the Autel for a Mercedes GLK 350 2015?

[@sean52mcardle]

great video pall , will it work on my E220 cdi 2009 Mercedes-Benz

[@Biscaynedave]

can you check the fluid levels ? eng oil. trans.

[@edrcvtbynujm2825]

I have a 2007 E350 cant find anything on command system :(

[@choowoonheam]

Does it reset 2014 GLK250 adblue start limitation?

[@Victor-gw7si]

Can I re program my new Sam module with this tool?

[@nick2128]

I have that srs restraint malfunction also on my 04 e320, did the scanner pinpoint where the problem was for yours?

[@GK7GARAGE]

Yes, it was my seat module

[@JamesFFHarris]

The Dealer told me my car, 2004 ML350, can not be fixed. The AAM went out and is now obsolete. Does anyone know a work a round because these computer are specific to each car and you can not substitute used parts. Great body , tires, interior, I need help!?

[@Downtime_videos]

Do you know if this works on the 03 sl500 (r230) ? And where did you get this scanner from??

[@GK7GARAGE]

It should work, I bought mine on ebay

[@Downtime_videos]

@@GK7GARAGE oh ok cool thanks man

[@hishamshahrour5085]

Thanks for this video. I just have quotation if this scan can do programming like SRC program, my car 2004 E500 w211 needs to clear the usage of the SBC from exceeding the 350k to zero.

[@GK7GARAGE]

No it doesn’t do that, but it can pull the code but not reset the counter

[@hishamshahrour5085]

@@GK7GARAGE thank you very much.

[@jackiliev7047]

But China chip from Ebay for 25$ and reset the counter

[@hishamshahrour5085]

@@jackiliev7047 thanks for your advice, do you have like to shear with me? I will appreciate it.

[@jackiliev7047]

@@hishamshahrour5085 W211 R230 ABS SBC Tool Repair Code C249F Tools For Mercedes Benz SBC Reset Tool

[@kishorilalkishoreda5719]

Hey buddy thanks for the tutorial I have a MB S430 year 2004 , whenever the weather gets cold or rainy, when I press the unlock button it doesn’t unlock the doors, I have to keep pressing the unlock button for more than 5 minutes then it unlocks the car. Do you have any ideas where the problem is ? Thanks

[@teamafot3001]

Bad remote

[@abramcaperon7244]

This doesn't work with my 2000 clk 430 and i bought the benz - 38 pin

[@auck1969]

I've noticed this guy ignores all questions. I'm pretty sure this specific scanner only works for starting the year 2002 to 2016 or 17. Hope that helps seven months later.

[@robertehlers4330]

2004 e320 that will not turn sos off will it

[@D33P_4K]

I’m replacing the front fuse box (front Sam) was wondering if this would program the new one or if anyone knows a scanner that will please lmk

[@adama4196]

I have a w204 2011 c class, does this tool let you start the engine after an accident?

[@GK7GARAGE]

Not sure

[@nickcsuki8123]

Is that you master chief?

[@moneygettingmovement7901]

Will this work to clear p0715 code after conducter plate was replaced

[@אנדרהוויליאמס]

Is it possible to reset hours on different components?

[@robertehlers4330]

Can it set teleaid to mot present ot not?

[@balenciagaforever8829]

Hi This scanner works on p0016 and p0017 codes?

[@marcrodriguez813]

I have a 2004 and my power window control stop working but the the windows do work and I have a brand new switch board can I reset the window power board with this tool?

[@glasser2819]

Benz replacement modules need to be CODED to work with each individual car. For "coding" you need a Xentry tool connected live with an online Benz account.... ouch ! This is why a cheap fuse-box gets real expensive quickly... where Japanese cars NEVER NEED a stupid fuse-box replacement. 😅

[@sm7538]

On this can you make chirp noise when you lock the car

[@GK7GARAGE]

Don’t think you can

[@Norseman220]

If your car supports it you can change the setting in the menus in the instrument cluster via the buttons on the steering wheel.

[@curtsmith2032]

Can you tell me how you fixed the heat, I fixed the heat on my W211, I changed the valve and it still doesn't work. Is there a reset from the scanner because I bought the scanner to reset if needed.

[@anodizedretrofixed7]

Can I use this scanner to activate the abs system and perform an automated brake bleed? Thanks 🙏

[@GK7GARAGE]

Yess

[@premowilson595]

@@GK7GARAGE my radio comes on and then powers off and my srs air bag lights are on and check engine jus came on will this help me ?

[@victorious_love8881]

Hi thank you this was a really valuable I have a 2009 E350 and I had got a code today and I live out in the desert and this is my only vehicle and right now as you said you know we're all trying to save money I thought I'd give it a shot and just ask to see if there was anything you can do to help I got these codes ECM- ME97 AMG for Combustion engine M159 ( N3/10)) And I have no idea what they mean I try to look up online if there is anyone that could help I would really appreciate it thank you

[@trento8397]

Hey bro do you know With the first ob2 option can it scan all other cars? That are not mercedes

[@GK7GARAGE]

Yes it can, that’s a generic OBD

[@trento8397]

@@GK7GARAGE thanks bro

[@jn3750]

Does it work with OTHER cars, in addition to MB?

[@TendayiChiramu]

yes it does

[@DrLEMICHAELS]

How can I get this scanner please

[@CHREnteprises1]

does not address controles and ecu reset as stated i label

[@franciscopinedo1552]

how much is that scanner?

[@kglife4180]

I just got the scanner but idk how to use it lol

[@bobbye4731]

So you choose automatic and diagnose but it doesn’t even tell you if there are any issues?? You have to go through each module to see if there’s a fault code?? What a waste of time

[@GK7GARAGE]

First do automatic scan, then specific scan

[@victorowens9150]

You have to spend almost $2k for that type scanner!

[@bettykent426]

👌

[@xNOFEARx58]

Can i lower my Airmatic on my w212 e500 with this Tool?

[@GK7GARAGE]

I don’t think you can

[@akenapatrick410]

Was very helpful

[@williamlynch6095]

What obd2 scanner are you using please

[@nopjack7278]

Are you joking? Geez.

[@FanieSeleka]

How,to,dismmetle, MERS edersbe s,engine

[@robertehlers4330]

Does not even reset tele aid module lol

[@robdee5347]

WHERE is the reset all modules? Not shown in the video and NOT in the one I've just bought on the strength of this! Pretty average tester if you ask me, not worth what they are asking for it, so mine will be going straingt back for a refund! Poor video.

[@robertehlers4330]

This dude dont answer dont waste time also its not star tool he tryin bs you

[@vonnwar5103]

You talk too much

[@kaaylib]

😂😂

[@persianchris2451]

Dude, turn that dumb beep off.. please

[@markfrost2707]

Ugly Mercedes ...I like my 97 c class better

[@bobslice1765]

S430 4matic 2003 ? Support ?

[@leon7891]

Do you have E55 AMG in the W211 you selected ?

[@TERRYBOLER]

Does it have rodeo mode for the abc system

[@luiscintron3863]

Will an mbv2.0 do the same

[@maxelsosa3863]

Can it read ESL and EIS modules?

[@GK7GARAGE]

Everything

[@click381]

Hi, does it reset TCM sprinter 2006. Thx

[@GK7GARAGE]

Yes

[@click381]

@@GK7GARAGE thx