How to reset the fuser unit counter of a Brother MFC-9330CDW printer

After replacing a defect fuser unit, the counter of the fuser unit needs to be reset.
Use this procedure to reset the fuser counter on a MFC-9330CDW (should work for similar models, too):
- Touch and hold the "Home" button for around 5 seconds - 4 rows will be shown
- Touch and hold the last row (even though there is probably nothing written in it) - a number pad will show up
- On the numbers pad (not the one in the display) enter the following combination: * 2 8 6 4 - This will display the maintenance information in the display
- On the display, set 8 8 - this will show the "Reset-Fuser Unit"
- Touch the "SET" key on the display, twice
- Then touch the "Stop" key on the display
- Finally, enter the combination 9 9 on the printer num pad (not in the display) and the printer will restart
This video is an appendix of the following blog post:
www.claudiokuenzler.com/blog/...
To see how to replace the fuser unit, I recommend to watch the following video: • How to Change the Brot...

[@roxymadison2008]

Worked on my 9130. Thank you.

[@PhilRussell]

THANK YOU!!!

[@FazFireFist]

This fixed my problem immediately! Thank you so much! :) My printer: Brother MFC-9140CDN

[@paulgribbon2837]

Thank you! Worked for my MFC-9340cdw as well.

[@gloriamiguez6233]

Thank youuuu!!!!!

[@maisonarthur7166]

Großartig. Super erklärt

[@sissam1041]

Merci ! cela fonctionne également pour la MFC9340cdw :-)

[@SmileyForLife1]

hey! I did it and it worked but I still have the self diagnostic: restart in 15mins error. Do you have any additional idea how I can fix this? :)

[@ClaudioKuenzler]

Hmm, no idea unfortunately. Might be another cause?