How To Reset The Wifi Settings On A Garage Door Opener ( Liftmaster Craftsman Chamberlain )

Hello! There are several reasons why you may need to reset the wifi settings on your garage door opener.
1. If you've been connected before but something happened and you have to reconnect to your garage door opener ( Try deleting the "garage door" from inside the myQ app as well )
2. You just moved into a new place and the old tenant / owner had their phone connected to that garage door opener
3. You want to erase any trace of an old tenant having access to your garage door opener
4. You may have tried to connect and it and something went wrong and want to start fresh
Hopefully this short video is helpful in erasing your exisiting wifi settings ! Thanks for watching as always!
Hopefully this helped and thanks for watching!!
Feel like supporting us with a tip? Venmo link below (:
account.venmo.com/u/garagedoo...
This channel contains affiliate links to products. We may receive a commission for purchases made through these links (at no additional cost to you of course). Thank you for supporting us this way (:

[@PourItOut]

If anyone has an iPhone 14 or later reading this.... I tried to get my phone to connect for literally hours, on 3 different days. I have done everything for wifi resets, phone resets, complete factory reset, and no matter what I tried, I could not get my iPhone 14 to work. It would not get to the point where it brought up the list of wifi networks to connect to. After much frustration I decided to try my wife's iPhone 11, downloaded the app, logged in and BOOM - it worked the first time!!! I am so relieved and had to share. Can still use the app on my iPhone 14 to open and close door but just couldnt get it set up that way.

[@GarageDoorGuidance]

I have experienced this myself, and you are right, for whatever reason some phones just won’t do it.

[@elliieevc8108]

Oh well what if you don’t have an older phone 😢

[@sonnyblack3877]

It worked. The tech support for chamberlain are idiots. So simple and thanks for the guidance.

[@GarageDoorGuidance]

😂

[@HenryGambell]

This is exactly the information I was looking for. Thanks for the video.

[@4242SLAYER]

Video helped out a lot! Thanks so much!

[@gchase4073]

Excellent video. Short and sweet. I'm sure this reset will fix my MyQ app setup issue(don't setup opener when door is open! lol). Thanks!

[@ramblinman7153]

The adjustor button keeps flashing blue no matter how long I press the button.

[@GarageDoorGuidance]

What if you unplug and plug it back in?

[@keithc9678]

The green light is still on after I did this. I tried to unplug and plug in, but still...what can I do next?

[@GarageDoorGuidance]

You held the black rectangle until you got the 3 beeps?

[@keithc9678]

@@GarageDoorGuidance yes, I did

[@danabiehl5917]

We have a Verizon 5g internet, can't seem to connect the garage opener

[@GarageDoorGuidance]

It only works with 2.4ghz as far as I know

[@MrKokspang]

Ive do this reset 8 times now and i keep getting the message in MyQ app that the garage door opener was previous connected to a MyQ account and it wont reset the memory of the Liftmaster opener

[@GarageDoorGuidance]

I’d suggest calling liftmaster support at that point they’re usually pretty helpful

[@khao1412]

Mine, it showed haft green haft blue. Do you know why?

[@GarageDoorGuidance]

If it’s blinking half half then it’s trying to connect to the router or if solid then it’s added to another gateway

[@khao1412]

@@GarageDoorGuidance i fixed it already. Thanks

[@Splitzify]

The last beeps wont beep

[@GarageDoorGuidance]

Replied

[@brucehayes5111]

The black rectangular button is not lit up at all. What could be the issue there?

[@GarageDoorGuidance]

Everything else is working fine?

[@brucehayes5111]

@@GarageDoorGuidance No, nothing but I did a little digging and found out that it is a MyQ but no wifi on this model. I think there's another app that I might can use for this particular one. Thanks for your response!!

[@GarageDoorGuidance]

@@brucehayes5111 you’ll need the internet gateway or wifi adapter in that case

[@MrMovieflash]

does that reset everything else like programming of wireless key remote?

[@GarageDoorGuidance]

This should just do the wifi

[@cheeeez_it6061]

The light doesn't stop flashing for me.

[@GarageDoorGuidance]

The blue light?

[@cheeeez_it6061]

@@GarageDoorGuidance the arrow above the rectangular blue light keeps flashing forget it never stops

[@GarageDoorGuidance]

@@cheeeez_it6061 everything works fine though? This is the link to error diagnostics for the flashing arrows. support.chamberlaingroup.com/s/article/Garage-Door-Opener-Diagnostic-Codes

[@ArtyJames]

Are you tryint to tell me there's no way to reset or reboot this device without climbing up into the garage? What a piece of crap

[@GarageDoorGuidance]

Yes

[@PackFan2323]

Huh? Not too helpful.

[@GarageDoorGuidance]

I’ve run into many instances where I wasn’t able to connect a new device until the previous wifi settings were erased. As time goes on I’m sure this video will be more helpful to many in that scenario

[@PackFan2323]

In my case the resetting of the wifi on my Liftmaster was the easy part. I've spent a good part of the afternoon-early evening following the prompts and no success. Hold middle button til clears, press yellow 3x, go to wall unit and initiate wifi reprogram, back to phone app, connect to the Liftmaster's wifi, connect to home wifi insert password...times out..try again..

[@GarageDoorGuidance]

Your wifi, is it 2.4 or 5 GHz ? Any idea ?

[@PackFan2323]

@@GarageDoorGuidance T-Mobile 5g Home Internet - it has both.

[@GarageDoorGuidance]

@@PackFan2323 It will not work with the 5G. When you get to the wifi part of the setup, select your 2.4 wifi instead of the 5. This should fix the issue unless you’ve already tried that.

[@Daisy-ox4th]

This video is a joke , no help at all

[@GarageDoorGuidance]

Depends on what your trying to do. It’s an issue I’ve run into with reprogramming the wifi settings and this is an important step

[@Splitzify]

My black rectangle doest light up at all, cant get it to connect to wifi

[@GarageDoorGuidance]

Unplug it and plug it back in the press and hold the square for several seconds ?

[@GarageDoorGuidance]

The other thing is these run off 2.4ghz wifi so if you only have 5G it won’t work on that one