HOW TO RESET TPMS WARNING LIGHT BY YOURSELF ON ANY NISSAN, INFINITI, HYUNDAI NO SCAN TOOL NEEDED!!!

This video will show you how you can reset TPMS light by yourself by just using a jumper wire or a paper clip on any Nissan, Infiniti, Hyundai vehicle.
THIS IS THE BEST AND VERY AFFORDABLE SCAN TOOL. I ONLY RECOMMEND THIS ONE. I USE IT IN ALL MY JOBS.
full version
www.amazon.com...
10 models all systems
www.amazon.com...
Disclaimer:
Warnings And Caution
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.

[@computerpuppet]

Works -2013 Frontier Success! The TPMS light is now off. YOU must Deflate each tire as instructed, so the system can identify each wheel sensor separately. Once the system learns the sensors, it will turn the TPMS light off, and then back on until all of the tires have been inflated to the correct pressure.

[@alberts7061]

Thank you. Worked great on 2008 Nissan Altima. Before doing that, I just add air to all tires 35psi and did the trick. And bang, the tpms light went off after I drove it and made a circle on the street.

[@darrenmcwhiney3220]

Saw another video and that guy was only off from your settings by one pound, so you obviously know what your doing!👏🇺🇸🙌👏

[@cristianokelvin6462]

I dont mean to be off topic but does anybody know a method to log back into an instagram account..? I stupidly forgot my password. I love any tips you can offer me

[@callumedward405]

@Cristiano Kelvin Instablaster ;)

[@cristianokelvin6462]

@Callum Edward thanks so much for your reply. I found the site through google and im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

[@cristianokelvin6462]

@Callum Edward it did the trick and I now got access to my account again. Im so happy! Thanks so much you saved my ass :D

[@callumedward405]

@Cristiano Kelvin No problem =)

[@kevinthomson6324]

Been looking at that tpms light for a year now waiting for that bulb to burn out.... Maybe tomorrow I’ll spend 20 minutes and try this quick fix instead. Thanks for posting

[@edwinjacobo4112]

You did it? Tell me please what you made 👍

[@jstrole814]

Thanks for taking the time to show this. It didn't work for me but, I suspect I have a dead battery in one of the sensors. 👍

[@ConnerDenton-kr6zo]

They don’t have batteries

[@pocketacez1211]

worked like a charm on my 2007 Altima!!

[@BPoweredLove]

Is it still working?

[@pocketacez1211]

yes. this fixed my issue!

[@pepperman1na]

This worked great for me. my Tpms light was flashing for about a minute then would come on solid after I replaced one of my tpms sensors. once I grounded my paper clip 6 times the light started blinking again and didn’t stop blinking until I drove the car for about 4 minutes at about 20 miles an hour but I have an Altima just like the one in the video. Thanks again for the video

[@suvitfungsatit244]

I just did it on Nissan Armada 2009 and it works. Thanks for posting.

[@velvisperez9489]

What pressure did y poi y ser your tires to? I have a pathfinder and trying to figure this out

[@genderlesspotato10]

Thanks George! 5 and a half years later this is still useful

[@bogdygino]

If I have a 2010 Nissan Maxima with a recommended 33PSI on each tyre, to do this, do I just need to have 4 different tyre pressure on each and following these steps it will work?

[@stevewaclo167]

Hey George, great 411 👍👍😀. My ‘08 Altima Coupe SE has 135k and batteries died. Piece of black tape works for me!

[@DK78518]

Hey buddy, thanks for the video. I did the whole process correctly and the light was blinking. I drove it around for a while but it just kept a blinking. I finally stopped, turn off the car and turned it back on and it became solid again. Then I refill the air in all four tires and the light is still solidly on. Not sure what I did wrong there.

[@tonyfeliciano5981]

Try filling the spare tire 55 to 60 psi. Make sure all 5 tires are correct. Drive until light goes out or do a reset. If still no luck. Bad tpms sensor needs to be replaced

[@youarebad165]

@@tonyfeliciano5981 Why would you fill the spare tire? That's not even connected to anything.

[@tonyfeliciano5981]

@@youarebad165 tps sensor

[@dillonyng207]

@@tonyfeliciano5981spare tires aren’t integrated with the TPMS according to the user manual.

[@tonyfeliciano5981]

@@dillonyng207 sensors are read by signals coming from the tpms sensor. They are not connected by wires.

[@janinemanahan1091]

Exactly what I need. Just checked my car tires just awhile ago. Put air pressure for 33 Psi each tires. (According to my car's manual) But I'm clueless how to activate the TPMS on my car. Anyway, I have Nissan Maxima '10. I just bought it last week. Thank you for this video. I will check again my car tomorrow.

[@TheLawnSensei]

Gorge very great video. I have a TPMS on on my Fiat 500 there is not reset option in the menu and the tires are ok the problem is on the right rear wheel what is your suggestion here?

[@sohldier1]

thank you George that was excellent detail! we appreciate you taking time out of your day to make life a little easier for some of us..God bless you and your family...

[@melniksmotors]

+pliny sohl Thanks for your encouragement

[@laqueshaheight3192]

George Melnik

[@krissling25]

@@melniksmotors will this tpms trick work on 2012 Murano?

[@alfredotorres9197]

I just did this to my 2010 Nissan Altima and it did work but it took more than just driving around the block. I actually had to jump on the freeway for about 5 minutes then the light went away. Thanks for the info though!!

[@spyrosbanos5396]

Alfredo Torres {"ηγη εερ445τΤυθθ&7

[@lorraine7kkmcfield955]

on my 2010 my car won't start it start and then shut off I

[@BurmanALAN]

Will this work on the 2015 Nissan Rogue Select (Japan Build)? Could not find any single wire pigtail under the dash. Any help will be appreciated.

[@DS-ss7vl]

Did you tap ground on the silver metal piece that is between the 2 plastic slots for the plastic cover? Where your alligator clip is pointing to @5:49 in the video?

[@Josh-oe4ex]

2008 Altima. Made sure i am at 34psi 31ps 29psi and 26psi. From drivers front clockwise. I drove it on backroads for 10 minutes and it just kept flashing. I should say, prior to this it would flash for 60 seconds then stay solid on no matter what psi. I could not get it in learn mode until i unplugged battery(clear CMOS if you will,lol) and then it was on solid when i turned ign to "ON"(not start) then tapped it 6 times and started flashing. Flashed for the entire drive. So i gave up on it after that. Now it will start with steady tpms on light unlike before. I can also get it back in to "learn" mode. I'm going to try something i read elsewhere and drain all tires very low. Let the tpms system "see this", then fill to 34,31,29,26 as stated. Perhaps the whole thing is different pressure and what i may try is 34, 30, 25,21 or something like that with a wider marging. *I have not used a TPMS scan tool on it yet. So................in theory i could have a hardware failure like a bad sensor or bad rf receiver. Guessing that these things run 300 to 400mhz rf carrier signals. I just got the car as a spare while our POS Kia witht he bad engine is getting said engine replaced(not fun fighting with Kia btw) THANK YOU GUYS and thank for the video!

[@USDiploMike]

Thanks man! Great content. Easy to find and concise. Thanks for being clear and direct! 😎🙏🏼👍🏼

[@ArmenArmenjs]

Well, now a question. I added air for past years and TPMS light would go off. now it doesn't, My manufacture max tire air is 51psi, I have all tires at 41psi. The light is still ON. by doing this trick would it solve the issue if one or more sensors likely are not working???

[@newbeeeeeeeeee]

hello +George Melnik thanks for the great instruction. I followed every step your instruction, and the TPMS light blinked and went off. However, it did not came back on solid again (after driving 2 hours already). It should came back on solid just because the low pressure right? Do you know why? thanks in advance

[@mahman7464]

Hi George, this is Mahendra from Massachusetts. I really appreciate that you have taken time to educate through this important factor. I have a Hyundai Sonata 2007 where there is TPMS sign on all the time. I did check the tire pressure, I lowered it, increased, but the sign did not go until now. If this is procedure to take out, then is it the same for Sonata also. In my car its not a symbol for TPMS warning, rather TPMS itself. Please help. Thanks, Mahendra

[@montydaniels1054]

I just figured I'd check this video out because I have looked for the past 1/2 hour for a YT video that shows where the ''TPMS Reset'' is on 2010 Jeep Patriot, which is supposed to be right under the steering wheel, which I couldn't find. Just about all of the videos are on how to re calibrating the sensors after you or a tire shop has changed tire sensors. I finally got the ''Low Tire'' warning light to go off and all 4 of my tires did show the correct tire pressure. lol, I hardly ever drive over 45 since I'm always doing just city driving and the that wasn't fast enough to get them to reset. So today I took it out & drove 50-55 mph. After like 4 miles the ''Low Tire'' light went out, the 1 tire that read 0 lbs slowly went up to 35 lbs. One less warning light on my instrument panel...

[@oll1998]

For those aggravated by the length of the video, the part we actually want begins at 4:55

[@Garage-wt5jl]

Isnt the tire pressure on all four tires important too?

[@Conald_isAfalseProphet]

Question... On my 2010 Altima mine will not turn off even after my sensor has been replaced. I did this procedure and got to the driving part, the light never turned off, I drove fast, slow for an hour.. I took it to a tire shop, and 1 sensor was bad, they replaced it and programmed the sensor. However the light still hasn't gone off. Now when I try to put it in relearn again the light will not blink, it just stays solid ALL the time, even while I try to tap that wire to ground, and yes, it is a good ground connection. Dealer said it'd be 140$ just to diagnose it which seems nutty just to hook up a scan tool and clear it as that's what seems to be needed... Anyone have any ideas? Weird thing to me it will not go into relearn now, it did once but since then it has had a solid light..

[@Butterdooo]

2009 Altima. Set all 4 tires to those pressures, grounded the sensor so the light was flashing, but when I drove the light never went to solid. I drove for 5-10 minutes mostly over 30 mph. When I turned the car off and back on again, then the light went solid. Drove back home and filled tires. After those drove around and the solid light still stays on. Did I do something wrong or do I have a bad sensor?

[@rafaelaquino2872]

This procedure would be the same for a 2007 Nissan Frontier?

[@mikeh.8155]

exact same model year and need the answer!!!!

[@tjl9585]

Interesting, but video could be half as long if not for prolonged watching of tire bleed.

[@Welbeloved]

It's drawn out for dummies...

[@mayadoniec]

Thanks George for the reply, but 2013 pathfinder doesn;t have single lead wire. I found six wire harness with 2 white 1 green and 1 black I used green and whites but could not force in the relearn mode. I guess this is no go for the newer pathfinder.

[@mannyclemente7159]

Will it work if you replace all tpms sensors?? In case one or more of them have a dead battery?

[@kiranakasono1561]

After the tpms light starts flashing do you leave the wire in and take the car for a drive or just leave the car on and pull the wire out before starting the ignition?

[@melniksmotors]

I pull the wire and take it for like a 3 min drive

[@OKAZWA44]

Cheers...... mate for the info. very much appreciated it ...clear and to the point

[@mariadelia7945]

Why do you lower the tire pressures below normal recommended and why does each one get lowered to a different PSI number?

[@stefanvanbraam9792]

Thanks have a 2010 Nissan Altima 2.5s and have this problem

[@AwsBadr]

Does this work with off brands sensors? I did buy a Chinese brand sensor that used to work on my android headunit and after 6 years the headunit died and no longer using the same adapter to the headunit on get the signal from the TPMS.

[@Max-rm7qf]

Thanks George! Will this work on my 2013 Hyundai Accent GS? I tried briefly but couldn't find the white clip under dash.

[@BluRN7]

ok great advice but 80 grand for snap on versa really come on snap on dealer says 10 grand out the door with everything. but still thanks for good advice

[@johnwang9914]

It kinda burns me that they use batteries in these sensors when they could've just put a magnet on the brake housing and had the device charge itself as the wheels turned. The TPMS readouts don't even show up till you've driven a few blocks anyways. With batteries, you pretty much have to buy new sensors every five to seven years which wouldn't be so bad except for the extravagant price they charge for them plus the chance that the needed models may not be available in the future.

[@mustangpassurchevy]

They have generic ones that will work

[@bobbyanderson3865]

Say for a 2009 nissan versa do you know at all if I have the interlock device installed in my vehicle if trying your tire pressure reset technique will cause my device to alarm setting it off which can lead to a tampering with equipment reading?

[@langamaphumulo5009]

Unfortunately this didn't work for me last night,my 2007 Nissan Altima refused to comply,can you believe the nerve? I tried a paper clip and the tire pressure sign on the dash couldn't be triggered at all.Maybe next time i should try a wire instead.

[@DonziGT230]

My '08 Altima's TPMS light flashes for about a minute on every start up then goes to solid on. I installed new aftermarket sensors and it still does the same. I tried doing the reset procedure and nothing changed; any ideas?

[@zh85]

Yeah maybe a bad tire sensor

[@DonziGT230]

@@zh85 The sensors were fine. I took the car to America's Tires and they handled it quickly. He scanned each of the sensors, then plugged into the OBD port and bingo, working. I assume it was some kind of programming to get the car to recognize the new sensors and not just resetting the system, but don't know.

[@bjnopoli]

My light is already flashing when I put it in key on position. The it stops. But after 6 times of grounding wire it does no flash anymore. Any explanation or reason? Bad sensor? How do find out which one it is?

[@semperfi1566]

Thank you for the great video how do I find wire on on a 2016 Nissan maxima SL

[@rafaelreyes8974]

Thanks for your info I'm going to try your method over the weekend I'll let you know if it works on my vehicle thanks so much enjoy your Thanksgiving😅

[@scottsimmons1134]

My TPMS light has been on for 8 months on my 2010 Nissan Altima. The difference between my issue and the one you demonstrated in this video is that my TPMS attempts to reset (flashes) every time I start my car. After flashing for about one or two minutes the light stays on. I attempted to reset mine using your exact instructions, but it didn't work. I suspect that this means that one or more of my TPMS sensor batteries is dead. Any thoughts?

[@melniksmotors]

It could very posibly be yhat you have a bad sensor or dead battery. Have you ever replace any of your wheels or sensors. Because if its original set then you most likely have a bad sensor. Those batteries are non replaceable on those sensors. If you did replace tour wheels or sensors try that procedure few more times. If you had your tires replaced and this happened afterwards then most likely they damaged your tpms sensor while dismounting and remounting of tour tires.

[@scottsimmons1134]

+George Melnik Thanks for the quick response. The wheels and sensors are all original as I am the original owner of the vehicle. I did have the tires replaced, but that was 2 years ago. The TPMS light didn't start coming on until about 8 months ago. I do recall that the light came on shortly after a drastic, 30 degree F temperature change/freezing rain storm this past winter. I'm guessing a dead battery/bad sensor was the result of this sudden temperature change. I think I'll just ignore the light and continue manually checking my tire pressure regularly when I get gas. Thanks for the video and help trouble shooting!

[@TheDragon812]

+Scott Simmons Your description is exactly what happened to me.

[@zman92630]

I successfully reset the TPMS (thanks.) However, it's 4 days later and it came on again. Any idea what's triggering this?

[@50.Freddy]

Was the tire pressure low? (4days later)

[@tonyfeliciano5981]

Try filling the (spare tire) 55 to 60 psi. If it still comes on. Possibly bad tpms sensor. Remember to fill all 5 tires correctly, then drive until light goes out. Or do the reset again.

[@CharlieRocRevolution]

Did this on a 11 Nissan Altima. The Check Tires message turned off but the solid flat tire indicator won’t go away. Any suggestions?

[@lukes.5639]

Thanks for the info. I am about to tackle a belt change on a Nissan Quest but can't locate an adjusting tension method. All the videos fail to locate the bolt. I AM AT ODDS WITH IT.can u help

[@charlespostis1574]

Good afternoon George! Just acquired 2010 Nissan Altima 3.5SR for my daughter. TPMS remains on solid. When grounding the lead from the white plug 6 times, no flashing on TPMS warning light. I am assuming the batteries in one or more sensors have discharged and no longer communicate. I guess the only thing to do is replace all four sensors and follow your procedure again? Now, if I purchase sensors, can I do the procedure before I install them and verify that this will work and then install the sensors? Any other suggestions? Thanks, Chuck

[@carlball5708]

2011 Rogue does not appear to have this white wire

[@thomasowens9058]

I have just used the information in this video and it worked perfect. Thank you so much.

[@jnagime]

I just replaced all the sensor on my 03 Nissan 350z with original sensors,but still the same like the old ones,the light flash when start the car and go off,got no light and no tire pressure on the display,any idea what’s going on? Maybe needs a reset or something is wrong with the system? Thanks!

[@mvsaturno]

I didn't get this. Do you need to set a specific pressure on each tire so you can reset it? It will check for a specific calibration in order to reset or not?

[@mikeoneal4882]

After performing procedure 2020 Maxima, light blinks but then turns solid again within 1 minute and stays solid even after re airing tires to same 33 psi . Any ideas? Thanks

[@mman454]

You have a factory warranty... Take it to the dealer and get it fixed for free

[@trikerjon]

Great video ! Will this method work on a 2017 Frontier pick up truck ?

[@juvencelis1762]

you are awesome my tpms on my 2009 nissan altima 2.5s is on as well, thank you imma try this out

[@melniksmotors]

Good luck

[@traviesoloco768]

All you have too do is put 29psi on all 4 tires drive couple blocks and the light will turn off on its own

[@hadinsf]

What if the recommended pressure is 33 psi ?

[@Naysin2355]

@@melniksmotors my 2015 doesn't have the white wire with the pig tail. Am I out of luck?

[@comanchejr921]

Hey George, I have a 2016 Nissan Sentra, does it have a interface plug like that?

[@Miguelon27]

Does this work for a 2014 Nissan Altima S? I have a tpms light and error see owner Manual message

[@luisvalentin8108]

how i know witch one is. If i by the 4 sensors i need some device to program or is the same prosess. because i see others videos they are aweking the sensors. Thanks

[@jorgemora1100]

Where’s the white plug located on a Nissan Sentra 2013 we cant find it?

[@craigmcmillen9439]

Thanks George! I’m going to try this on a 2016 maxima with swapped wheels off a 2013 Altima (don’t ask) lol. I’ll be back with feedback!!

[@mcelroystube]

Did it work?

[@theatifonline]

Hi George. Its really a nice video. Thanks for that. But i have a question. i have nissan altima 2011. one of my sensors was broken while refilling the air in tire. i got a new sensor and fixed it in the tire. but still its showing the low tire pressure warning. whereas the tire/air pressure is fine in all the tires. can you please guide me how it can be fixed? Thanks

[@melniksmotors]

Was the sensor oem or aftermarket?

[@theatifonline]

Thanks for your response George. Actually i got the sensor from spare tire in perfect/working condition (same altima 2011)

[@melniksmotors]

Ok then follow my instructions as i did that altima it will reset the system with no scan tool. Make sure you do not skip any steps

[@alvaroaleman7534]

Hi, very good video. could you help me? my car is a honda civic 2012 and it does not have a TPMS reset button, could you tell me how to reset the TPMS system? Will there be any way like you did for a 2012 Honda Civic? please tell me, because in my country Nicaragua only the diler have reset tools. Thank you

[@juandanieltojguardado7326]

Hi.. i did what you said and everything went good until i fill all the tires with air again the tires are 305 55 rim 20 on a nissan titan 2010 i put 40psi and the light is still there.( i just replaced the stock tires with a diferent rims and bigguer tires and the light came on) i dont know if i did something wrong.. can you help me please.!

[@decent9235]

Where would i find the ground wire fpr a 2017 nissan frontier

[@redmcwilliams224]

Hi George, do you have any hints on how to do this reset on a 2013 Ram C/V? All sensors are good, tires inflated properly and the light stays on. Can't figure it out. Thanks man.

[@frankfontana8174]

Help! I have a Nissan frontier 2006. Fuses are located on the passenger side to the right of the lower glove box and under the hood. There is no loose wire lead. Is there a way to use your method on my truck?

[@mgonzalez481]

Where can I found the wire to do the tpms for Nissan Pathfinder 2013 if you can help me with that thanks so much

[@DavidPisarek]

I tried this on a 2008 Altima, the low mo it or light flashes a bunch of times then goes solid and stays solid. The sensors were replaced about 2 years ago.

[@tamilthunder6889]

What about the spare tyre. Do we have to deflate that too??

[@MrHengDoItAll]

Hey man after I touch ground 6times TPMS light did not flash. Keep stay solid do you know what it mean? Thank you

[@msburrage74]

What does it mean when the light is blinking when you turn the key switch and then goes solid after I start the engine? Also when I tap the grounded metal, it doesn’t seem to effect the light at all

[@tornadotom2390]

So many issues with cars since going digital/electric. So many issues that never existed before. Thanks technology👍

[@19blaktop]

You were born in 1974 huh..

[@galinstan5603]

Do 2010 Muranos have such a grounding wire? I can't find one.

[@darrenmcwhiney3220]

Thanks George! Your the MAN!😁👏😇🇺🇸

[@jaymario7714]

Dude!! That was good. Now how to change the cabin filter in a 2012 altima?

[@tkrdg7885]

Most cars, from glove pocket compartment

[@jamilsmart1236]

Did not work for me 2008 Infiniti 1. Found the tpms plugged in paper clip deep to make sure it’s touching metal . Turned on car touch 6 times. It just sits on the solid light no blinking

[@CABIX_81]

I have a 2015 nissan rogue with the triangle question mark icon onbasd,, its due to tpms,, will this procidure works in this year and model?

[@TotalCoreDump]

Will this work on Nissan Sentra 2014 SV?

[@mahmoudbenrabeh2106]

Hello Mr Melnik , I have Infiniti FX 35 2008 , and My sensor not working , in the dashboard i have the code Signal , and in the screen in my car i have 4 stars tire precure * , * ,* ,* . So with your method i can reset and working

[@jaredmathews2983]

Replaced one of the TPMS sensors on my 2008 Nissan Pathfinder LE V8 after the battery in the sensor died. Replaced the sensor with an aftermarket brand (VDO) purchased from O'Reilly Parts store at $50 vs. original Schrader brand. Pep boys installed and rebalanced tire for $27. However, Pep Boys did not have the attachment needed to reset the TPMS system. I tried the technique in this video with no luck, it would not reset. Took it to discount Tire and they reset the system for $25 and the warning light on the dashboard is now off. Of note, I asked Discount Tire if they would install a new TPMS sensor at some point in the future if I provided them with a new sensor. They said they would. This would be the cheapest route since Pep Boys is not able to reset the TPMS system after a new aftermarket sensor has been installed. I have read elsewhere that the Nissan dealership wants at least $200 for the installation of just one new TPMS sensor and $60 for just a reset.

[@fadarow4237]

Nissan wants $250 per tire..ridiculous!!

[@FriboLay]

I went to Nissan the other day for my titan they wanted $325 for 1

[@JJJ-pc9rf]

Nice tanks Schabow, Nissan, NV 200 with same issue ???

[@harveyr2546]

So doing this, it set low pressure to 26 psi? And high to 36 psi ??

[@danyellechavez530]

Mine won’t turn Off, does that mean I have a faulty sensor? Thank you 😊

[@mikeoneal4882]

My TPMS sensor light blinks at startup then stays on solid. All air pressures are fine. What could cause and how to troubleshoot or repair?

[@mariomosqueda3420]

Battery of the sensors maybe?

[@TheHocakWorak]

Can I do this on a Mitsubishi Endeavor? Do you know how to reset it on that vehicle?

[@f2lo2]

Any similar solution for Suzuki Vitara?

[@mahmoudbenrabeh2106]

I have Infiniti FX 35 2008 , and My sensor not working , in the dashboard i have the code Signal , and in the screen in my car i have 4 stars tire precure * , * ,* ,* . So with your method i can reset and working ???

[@js2380]

Thanks for the replay George, but can you show me or tell me how? 'cuz I have no idea how to do it.

[@raymondatobouh1000]

Hi, it is possible to di the same with mt mitsubishi RVR 2011?

[@melniksmotors]

NO THIS PROCEDURE WILL NOT WORK ON A HONDA CIVIC.

[@MBV97]

+George Melnik Hello. I did exactly what u did but when I drove it did start blinking but then it stayed solid because it stay there. All of my batteries r working in all 4 sensors but still no change. How do I fix this Please?

[@mrcokez1]

Will this procedure work on a honda civic? thanks god bless

[@laganjaestranja6352]

Lol well the video says Nissan.

[@CarAudioInc]

It will! You just have to set all the tires to 0 psi and drive it at 60 mph for 20 minutes then it will work on a honda civic, cheers.

[@sixpackbinky]

They charge up to 100.00 to check and put air in your tires?

[@gavinoalvarez3695]

Do you know how to reset or fix the remote for a 07 Nissan Altima they have new batteries and don't work what should I do?

[@georgianborat]

Hi, can I do the same on 2015 Nissan Versa Note? Thanks!

[@StrifeHighwind]

I have a 2017 Hyundai Tucson with this problem but I can't find the white piece at 5:15. Any advice pls thanks

[@chaki_77]

Hello, dear friend. You have very instructive videos. I broke one of the TPMS sensors. I bought a new one. You will not tell me how to train a new sensor for Nisaan Versa 2009. Thank you!!!

[@markatr6]

right at the critical 'tap' time , the video cuts out! is there a sound or click when tapping?

[@jameslaine2472]

Even with your very informative video, I still cannot find the TPMS plug and white wire on my 2003 Xterra. (and the dash panel required 2 screws to remove, not 1)

[@ralphfirley3882]

A 2003 Xterra may have an older version of tpms which does Not use sensors on each individual wheel. Instead, your light comes on when one wheel is spinning at a different rate from your other wheels (which is typically caused by the tire pressure being uneven on one or more tires). The only way to resolve this is to make sure each tire is at the exact same pressure and that your wheels are balanced. I had the same issue as you on my 04 Toyota which uses iTPMS (an older, less sophisticated version of TPMS).

[@rafaelrangel6485]

Does this work for a 2013 Nissan Altima?

[@garden_therapy_nj]

how do you do this with a 2012 nissan frontier and does a warranty cover this? thx