How To Restore Faded & Discolored Paint! - Chemical Guys

Today we have this american classic cruiser, 1962 Ford Thunderbird in the Detail Garage. Years of harsh UV rays have stamped out the bright torch red finish and in turn leaves a faded pink matte sheen. Harmful UV rays expedite the oxidation process. To combat this never ending battle, add coats of sealant and wax to delay paint damage that when left untreated can become so bad it will require new paint to correct.
Wouldn't we all like a fresh start, well now you can at least breathe new life into your vehicle using the right products and technique. Lets watch!!
••••••••••••••• Products Used in Today's Video •••••••••••••••••
➜ Medium Clay Bar & Luber:
www.chemicalguy...
➜ TORQ 15DA:
www.chemicalgu...
➜ Orange Hex-Logic Pad:
www.chemicalguy...
➜ V36 Cutting Polish:
www.chemicalgu...
➜ V38 Final Polish:
www.chemicalgu...
➜ White Hex-Logic Pad:
www.chemicalgu...
➜ Polishing Pad Conditioner:
www.chemicalguy...
➜ Green Workhorse Microfiber Towel:
www.chemicalguy...
••••••••••
Find a Detail Garage Near You!
● www.chemicalgu...
● www.chemicalguy....
● Website: www.ChemicalGuys.com
● Subscribe to our channel: www.youtube.co...
● Subscribe to our newsletter: www.chemicalguy...
● Like Us on Facebook: / chemical-guys-15994943...
● Follow us on Instagram: / chemicalguys
#chemicalguys #detailing #carcare

[@beetleworks738]

It's amazing what chemical guys can do. I have been using there products to detail a pitinia red 72 super beetle and thanks to them I won my frist trophy and made me want to pursue detailing as a career using there products.

[@ScottishScot]

You're an outstanding educator Bro

[@ChemicalGuys]

Hey Scott! Thanks so much for the incredible feedback, it really means a lot! - CG Nick

[@3131-r1e]

Just bought my first Chemical Guys starter kit and I have to say it’s well worth the money. I enjoy the videos to. Keep up the good work everyone!!

[@ChemicalGuys]

Hey John! Welcome to the Chemical Guys family!! - CG Nick

[@mikeydeeeee]

extremely thorough explanation, exactly what I was looking for. Thanks

[@ChemicalGuys]

Hi Mike! Thanks so much for the incredible feedback, glad you enjoyed the video!! - CG Nick

[@josealbertorayon4709]

Finally. Needed this video, Thank you Chemical Guys.

[@ChemicalGuys]

Thanks for tuning in!

[@ritchjilll3666]

My next job is a Red 95 F150 and the paint looks a lot like this, this has been the most helpful and informative video of all the videos I’ve watched. Thank you!!

[@ChemicalGuys]

Hey! Glad it was helpful, happy detailing!! - CG Nick

[@stbeverly]

I recently purchased my dream classic car, 1967 Ford Thunderbird 4-door in triple black. I’m getting to tackle this with my new Chemical Guys DA Polisher kit!

[@ChemicalGuys]

Congratulations and enjoy your detailing products!!

[@_skidge_7447]

61 tbird is my dream car so I had to stop and watch this to learn how to buff the paint on my 72 F100. Was not disappointed. Very informative.

[@ChemicalGuys]

Thanks so much for tuning in! Gotta love these classics!! - CG Nick

[@Jo_Wardy]

Paint probably won’t ever look as good as it did new but it looks damn close 😍 nice job on a beautiful classic

[@ChemicalGuys]

Hey Joe! Thanks so much for tuning in!!

[@raymondperez3553]

That's One Beautiful Classic 62 T- Bird, Amazing job Nick!!👍👍😎

[@ChemicalGuys]

Hi Raymond! Thanks for watching, glad you liked the video!! - CG Nick

[@juliancarretero3029]

Love your guys products only products I buy for my vehicle

[@ChemicalGuys]

Hey Julian! Glad to have you as part of the Chemical Guys family! - CG Nick

[@corrywilliams1290]

Chemical Guys products is the best out there 😍

[@ChemicalGuys]

Thanks for the support!

[@canadian7494]

Great video man thanks a lot. Was gonna wait to polish the 57 belair but when that Johnny be good song come on I head right to the garage lol.

[@ChemicalGuys]

😃 Enjoy your detailing products!

[@wiltonmiller7653]

Excellent over view with visual and comments. Thanks.

[@ChemicalGuys]

Glad you liked it!

[@13slot28]

I know nick is a professional, but I recommend taping off the crome trim so you don't scuff it.

[@TheThrasher1981]

Well, he's using very light cutting compound/polish. If there is oxidation on the paint is assume it's on the chrome too so it acts the same way and removes oxidation. Scuffing shouldn't occur.

[@aaronhuff4484]

Shut up

[@sarakavandi2107]

Thank you for the tip!!

[@badbrad5424]

I have an all original 62 thunderbird with good original paint. I’m getting ready to do this myself to her. Great vid. 🤘✌️

[@ChemicalGuys]

That's awesome, thanks so much for sharing! - CG Nick

[@badbrad5424]

@@ChemicalGuys thanks for all the great vids!!! You guys are awesome!!!!

[@BIGJUNE801]

Whoa! Major difference! Thanks for the vid, gonna have to try this in my 1968 Cadillac Deville it’s Teal, looks dull

[@ChemicalGuys]

Thanks so much for watching!! - CG Nick

[@skodakatie7341]

The paintwork looks infinitely better after correction!.

[@ChemicalGuys]

A night and day difference!

[@mytubebobbie06h]

Great job on that paint restoration! The only thing I would also do is polish the chrome.

[@ChemicalGuys]

Hey Saul! Thanks so much for tuning in and for your feedback. - CG Nick

[@trevortodd6060]

What a transformation. Looks great!!!! Now if I buy an older truck I can just do that to make it shine again. As long as there are not to many dents and scratches.

[@ChemicalGuys]

Thanks so much for checking out the video!

[@racefun4]

Who else LOVES listening to good songs while Detailing ?

[@1503ONERUS]

The 🎶 whirl and Wizz 🎶 of the buffer is my music 🎶 🎵 bud!!! 😂😂

[@wrbergner]

Great transformation on a true vintage car. Nice explanation on the importance of use of a one stage polishing method.

[@ChemicalGuys]

Glad you enjoyed the video! - CG Nick

[@myronhankins8240]

Outstanding transformation, Great job as always Nick! You are the man! Love my Chemical Guys products! On a side note.. where can I get my hands on one of those shirts you are always wearing??

[@ChemicalGuys]

Hi Myron! Thanks so much for the awesome feedback! Currently the Detail Garage button down shirt is reserved for employees only but we have tons of apparel so you can represent your favorite detailing brand. - CG Nick www.chemicalguys.com/search?q=apparel&lang=default

[@nicoleratliff7210]

Like y'all read my mind, have red faded paint I needed to fix 👏🤘

[@ChemicalGuys]

It's worth it to make that red paint shine and glow again! Let us know if you need any recommendations on how tor restore it!

[@KDLlinks]

Ironic, this is the exact video i needed, i have a 62 thunderbird that looks just like this and i need to buff and wax it, im doing mine by hand though because the paint has patina so it is very thin!!

[@ChemicalGuys]

That's awesome, happy detailing!!

[@mr.roush6709]

great video im working on a 57 Thunderbird Black Cheery color … polishing and Ceramic Coating

[@ChemicalGuys]

That's awesome!! Happy detailing! - CG Nick

[@kennyg3025]

I’ve been waiting for a video like this thanks y’all so much

[@ChemicalGuys]

Hi Kenneth! Thanks for tuning in!! - CG Nick

[@patrick_poliert]

Beautiful car

[@trevorsmiley4162]

Patience

[@Quintero0497]

Much love you guys are Badass!

[@akaredcrossbow]

Impressive job👍🏻👍🏻

[@ChemicalGuys]

Thanks for tuning in! - CG Nick

[@andresherrera2146]

I heard Laserhawk in the background and I immediately respect this video 200% more.

[@ChemicalGuys]

Thanks so much for watching! - CG Nick

[@kikcodog]

Hey Nick! I absolutely love my Torq 15DA. It's quiet, powerful and smooth as silk! Used an Orange Hex Logic Quantum on it to polish a crew cab Silverado. A good first test for it and it passed with flying colors! A great machine. Money well spent! Question: Is V36 a diminishing abrasive or a consistent super micron type? Now break out the CG Heavy Metal polish and bring those bumpers back to life ;-)

[@ChemicalGuys]

That's awesome! The 15DA is one of my favorite tools as well. V36 will break down and diminish as you polish. - CG Nick

[@OuzoLouGarage]

Hey Bigolddog

[@cameroncrush9591]

I like the fj40 in the back

[@ChemicalGuys]

Hey Cameron! Thanks for watching, check out the FJ detail video! - CG Nick kzbin.info/www/bejne/babUYoGupJyNe6M

[@chrissimon8403]

I have a 2019 red corvette, will the uv rays beat the finish up as well or is the paint different now a days??

[@ChemicalGuys]

Hey Chris! Good question, although modern paint has made improvements, the color red still absorbs UV rays poorly and that begins the oxidation process. Layers of sealant and wax or a ceramic coating will prevent damage from harsh elements. - CG Nick

[@donaldthomason4588]

FYI Chris, I was told that GM and other US car manufactures went to water base paints and there are some issues that can arise down the road. I just bought a 2019 GMC AT4, I immediately got it ceramic coated to prevent any premature issues. Chemical Guys are spot on with their response to you.

[@chrissimon8403]

@@donaldthomason4588 Thank you, I appreciate the heads up!!

[@jmg3487]

I'd love to see a field car restored like this. I recently got an all original fb rx7 from a field and am going to try to make it look like this.

[@ChemicalGuys]

Great suggestion!

[@MrSlickmonster6973]

I just worked on my vehicle. It's a black wrangler. 1. The buffing pad was yellow it turned black. Is that normal? 2. It left some patchy black spots. I had to take them off by hand. Any Ideas?

[@gradycartwright8622]

Really liked the extra details about polishing

[@ChemicalGuys]

Hey Grady! Glad you enjoyed the video!! - CG Nick

[@richardseem7948]

another great instructional video again Nick can u do video on rotary polisher.

[@ChemicalGuys]

Really appreciate the awesome feedback Richard! Absolutely, what would you like to see pertaining to rotary polishing? - CG Nick

[@richardseem7948]

@@ChemicalGuys just more video's on rotary in general. thanks nick

[@ChemicalGuys]

Sounds good, stay tuned!!

[@guaranteedworstcardetailin6793]

Looking good!

[@ChemicalGuys]

Thanks for watching!!! - CG Nick

[@krogerm]

I was looking up videos because I just bought a...wait for it... a faded red 1962 T-bird.

[@ChemicalGuys]

😃😃

[@tedsperling376]

So the general rule is 5 dime sized dots for each 2’ x 2’ section? In the event I used too much, what is the best way to remedy that? Microfiber or use one of the pads with nothing on it? Thanks

[@ChemicalGuys]

Hey Ted! Thanks so much for watching. If the pad has too much product on it, simple spread over a larger than 2'x2' area and then work it into the paint. - CG Nick

[@clarkwhite445]

Great video. I have a 1970 vette red. It is super super faded. Similar to your t-bird but worse. Would you recommend the v36/38 or do you have something even more intense?

[@ChemicalGuys]

Hey Clark! Start with a test spot using V36, if you need more cut try using V34. - CG Nick

[@turkey0165]

Thanks for the tips, guess I’ll be investing in a good power buffer from Harbor freight next spring when I do my oxidize faded 1990 bronco 2

[@ChemicalGuys]

Happy detailing!

[@dcraft969]

Nick, how do you handle polishing the areas in proximity to the windshield wipers. Do you use the polisher, or apply the polish my hand?

[@ChemicalGuys]

Hey there! For the windshield wiper valance it can be polished by machine or by hand, whichever is preferred. On this Thunderbird we polished all of the large areas with a TORQ 15DA and hand polished the smaller, intricate areas. - CG Nick

[@tedsperling376]

I’m doing this process but switched to wool cutting pads with the v36. I’m liking the results. Is that okay? Should I proceed with v38 and white pad ? Thanks

[@ChemicalGuys]

Hey Ted! Absolutely, experiment with which pad and chemical combination work best for you. Finishing with V38 and a White Pad will jewel the paint for a mirror like gloss. - CG Nick

[@tedsperling376]

@@ChemicalGuys thanks Nick!

[@tedsperling376]

Sorry, one more question. Is hydroslick the best wax/sealant to use if I might try for further paint correction down the road or is there something else you’d recommend for this. Was wondering if ceramic coating makes it more material to buff off later down the line. Thanks!

[@melvicious2907]

Can you use these and do it by hand? I have the same year Ford but it's a Fairlane same color and I do not want to touch it with a machine.

[@mikekozi-lester3887]

Slick

[@ChemicalGuys]

Thanks so much for watching!

[@spitfire5213]

Could you have used VSS?

[@umairkhan472]

Can you use butter wet wax after v38? Also, can I just apply butter wet wax after washing, claying if it doesn’t have scratches or swirles

[@ChemicalGuys]

Hi there! Yes, it is fine to apply Butter Wet Wax after your final polish. You can also apply your favorite Chemical Guys wax after a clay bar treatment.

[@jeremywatkins6929]

How often do you guys recommend to clean out the pad during cutting/polishing?

[@ChemicalGuys]

Hi Jeremy! Clean the pads as necessary. On this vehicle being single stage paint it left a lot of transfer on the pad so it had to be cleaned a few times during filming. Having backup pads is always a good idea. - CG Nick

[@kikcodog]

You can quickly clean the pad with a CG pad brush or with compressed air every section. Quick and easy right at the vehicle. Just put it on low and brush it out before adding new product then you don't have to worry.

[@justinratliff117]

what prep did you do prior to polishing? just a basic wash, or did you do any kind of clay bar or anything like that?

[@ChemicalGuys]

Hi there! Yes, the surface was washed and stripped before using a clay bar to extract contaminants to prep the surface for polishing.

[@justinratliff117]

@@ChemicalGuys what do you mean stripped? I bought one of the chemical guys polishing kits to include the buffer. After I give a singe stage car a good wash and before a clay bar, what "stripping" are you recommending?

[@ChemicalGuys]

@@justinratliff117 Check out Clean Slate to remove old layer of glaze, sealant and wax during the wash process. www.chemicalguys.com/products/clean-slate-wax-stripping-wash?_pos=7&_sid=01f77b6b7&_ss=r

[@liftedmoonlight1692]

Finally !

[@cocoyummy]

My man Nick how's life

[@ChemicalGuys]

Hey! Doing well! How'd you like the video? - CG Nick

[@cocoyummy]

@@ChemicalGuys it was good

[@johngarza8912]

How did yall take the blue off the tires and made them white ?

[@ChemicalGuys]

Hi John! Simply by scrubbing with a Nifty Brush and Nonsense All Purpose Cleaner gently removed the protective blue to reveal fresh white walls. - CG Nick www.chemicalguys.com/nonsense-all-purpose-cleaner/nonsense-cleaner.html www.chemicalguys.com/nifty-interior-detailing-brush/nifty-detail-brush.html

[@therazz07]

what would you recommend for some paint splatter on the rocker panel and wheel welds? Awesome products and videos BTW!!!

[@ChemicalGuys]

Hey there! Thanks for the awesome feedback. I recommend using the natural cleaning oils of Butter Wet Wax to gently loosen over spray and road paint. Use a clay bar for any remaining contamination. www.chemicalguys.com/butter-wet-wax/butter-wet-wax.html

[@sl4983]

What duster is good for the exterior?

[@pedromelendez4528]

What if I’m only doing a small section? Same process?

[@ChemicalGuys]

Absolutely! Use the same process to restore shine.

[@lad63bird]

Should've watched the whole video to see you also get to a high speed buff after you spread material...my impatience got best of me,...

[@ChemicalGuys]

Happy detailing!

[@juliancarretero3029]

Nice!!!

[@ChemicalGuys]

Thanks for watching! Happy detailing!

[@strengthbrosforlife]

How long does hydro slicks last on paint

[@yuripeters2991]

How long does it take to fully detail a car from wash to paint correction to ceramic coating

[@TheCarguy1993]

If you're talking about a concourse level detail where you're removing every defect possible it could be anywhere from 15-30 hours especially if it's a large vehicle.

[@guillermoescobar4414]

What are you spraying first?

[@ChemicalGuys]

Hey! After washing the vehicle, use a clay bar with Clay Luber to prep the surface for polishing.

[@frankm8533]

I need a new buffer, thinking about 5inch short throw. I just work on my own stuff and for friends, if I call will somebody point me into the right direction? Ive only ever used 7inch Dewalts in body shops, they just got to big and heavy.

[@kikcodog]

That Torq 15DA Nick is using in the video is surprising light and very well balanced. You can easily use it with 1 hand when necessary. Great machine.

[@JuanCarlos-gk4gg]

👍🏻

[@stevedawson741]

will this work on an old 48 truck that didn't have clearcoat?

[@ChemicalGuys]

Yes, that is correct. Thanks for watching!

[@Gramaha]

How long does the shine last?

[@ChemicalGuys]

Hey Joseph! Maintain gloss and reject harsh elements that cause oxidation and fading by applying HydroSlick.

[@corrywilliams1290]

I would like to see a 96 Buick LeSabre detail.

[@FordHoard]

I want to try to wax my 1953 Ford Customline, but I couldn't live with myself if I messed it up.

[@ChemicalGuys]

Hey there! That's awesome!! Butter Wet Wax is the easiest carnauba to apply and remove. Start by washing and clay barring your vehicle (if necessary) before applying a fine coat over all surfaces that are gloss painted, shiny or clear and allow about 15 minutes from proper bonding as long as the surface is cool to the touch. Then, buff off with a clean microfiber towel. - CG Nick

[@FordHoard]

@@ChemicalGuys I just dont understand. Is it the other compounds I've put on it that's causing it to do that or just the paint? I makes me mad because I spent 2 whole days going over the entire car by hand in fine detail making sure theres no spots on it, and I spend $11 on this spray wax and it makes it look swirly and horrible looking. Edit: I found out what it was! It wasn't the spray wax. It was the polishing compound that made the car feel sticky. It must have still had a very thin laver of that on it, and it was getting smeared around when I put the spray wax on it. So I washed the car and put the spray wax on and it looks great. Probably not the best, and you can only see your reflection up close , but it's better than it was.

[@willdamian1066]

Man this almost looks fake. I tried polishing out my truck with your guys pads and they’re covered in gunk. What do I do?

[@ChemicalGuys]

Hi William! If the pad is clotting, be sure the surface has been thoroughly cleansed with a stripping soap that removes old coatings as well as using a clay bar to extract embedded contamination.

[@willdamian1066]

@@ChemicalGuys paint was prepped thoroughly. It’s a single stage paint just curious if a wool pad would work better?

[@khristiantan2709]

Is the effect permanent?

[@ChemicalGuys]

Hey! Machine polishing removes scratches, swirls and oxidation by refining the clear coat. As long as proper washing and drying techniques are used as well as routine coating, it will retain a gloss finish. - CG Nick

[@baldemarcastillo675]

Classic pick up truck eg Ford or Chevrolet

[@adamrobledo684]

Any way to reduce the haze when light shines on it?

[@ChemicalGuys]

Hey Adam! Refine the finish by using a White Hex-Logic Pad and V38 Final Polish.

[@adamrobledo684]

@@ChemicalGuys thanks!!!

[@teeyuh5043]

Can you do this outdoor?

[@ChemicalGuys]

Hey! Polishing should be done indoors but can be performed when the surface is cool to the touch. Work in the early morning or evening hours when the temperature is cooler.

[@craigwatson9736]

I’m gonna do this to my 69 gmc truck

[@ChemicalGuys]

Enjoy your detailing products!!

[@josephhanson334]

Nice thunderbird but I would rather have a slightly newer one like 5 years newer

[@ChemicalGuys]

Hey! Thanks so much for tuning in!!

[@neilwhitmore]

I just wish there was some raw footage that wasn't speed up or panned out so I could see his arm speed.

[@ChemicalGuys]

Hey Neil! Great feedback, a good rule of thumb is to move your arm about an inch per second.

[@Shineaddictsdetailing]

Where's all the haters at?

[@acitizencares2522]

Oh just wait, one will float up😁

[@josephhanson334]

They don’t need to fix anything they don’t have a life

[@jamalcole1985]

Now its time for me to correct my cars paint.

[@ChemicalGuys]

Let us know how it turns out!

[@mrmoss149]

When Johnny b good came on - I thought it was Marty McFly & Marvin Berry's bsnd....until I heard the vocalist. Chuck Berry was it.

[@MichaelBlast]

What's b36 ? What's b38 ? Us noobs don't know all the terms

[@ChemicalGuys]

Hey! Check out this link to the V-Line of Polishes. www.chemicalguys.com/products/v-line-polish-compound-kit-for-light-to-heavy-swirls-scratches