How to run Router | Modem with Power Bank | 5v to 12v boost cable.

[@AddisAbabaClose-up]

I today tried your trick with my recently bought used g7x mark ii compact camera and it worked. I first tried with out the plastic bottle as others suggested but it didn't work. It worked when I used the vacuum cleaner fitted with the plastic bottle. No more dust on the sensor now and I'm happy. Thanks! 👍🙏

[@nikkiemaristela4941]

Wow! This is a good power back up special during brownout. Thanks! I need to buy that cable.

[@chirantanchakrabarti870]

Thanks a lot.This is exactly I am looking for a long time.I already use my small 5 Volt (0.5 amp) TP Link router by directly connecting to a 10000 mah power bank which I can run for 5-6 hours continuosly.But I have two 9 volt routers also.I can use now those routers with my 20000 mah power bank(I have one).

[@Abhi-nb1xo]

1)How often do you use this setup. 2)Is it working fine till now?

[@mounford]

What happens if my power banks output 5V at 3amp instead of 2amp, would this still work? I ask because in the product description it says Max input current: 2A. Let me know. Thanks.

[@gurribuy]

yes. this would still work. Out of 3A, it will only take the Amps it needs to work. Just make sure that the device you want to run using this cable doesn't take more than 1A. Because this cable hardly outputs 1A and anything above that the cable would not be able to power it.

[@mounford]

@@gurribuy Got it, I appreciate your response. Thanks.

[@shan.bikeriders2002]

Hi Bro nice video, still your boosting cable working? How long it can use. Quality good or bad?

[@Sabirreboiii]

how long will a 20k+ mah powerbank supply power to a 12vinput wifi modem(fiber)?

[@sachin826v]

Is it good now after this long time?

[@AnupomAG]

Since this is a stepup cable then what if use phone OTG instead of power bank?

[@gurribuy]

if your phone is capable of outputing at least 2 amps through otg then you can use a phone to power this cable. But, the maximun reverse current through an otg, i have measured is only 500mA. So, you can't use a phone to run this cable. Powerbank is the only option.

[@AnupomAG]

@@gurribuy You are right

[@moviehub8425]

How much continuous hours of backup do you get from a 20,000 mAh Powerbank?.

[@BunMaska]

Am guessing on the inside it is a simple DC-DC step up / down regulator.

[@timguy161]

Does the router have better WiFi reception with a public WiFi hotpot that a cell phone? If so, I can use it as a repeater in public place to get WiFi my phone is too weak to access.

[@bhattdaxesh9]

Tp link mr100 support this 9v cable ?

[@kushal4484]

I have a WiFi and a router modem (fibre connection) how can I plug both ?? Can I tear the cable and make 2 male?? Also, do you suggest keeping the power bank charging continuously like a UPS? Else this is a a lot of hassle

[@doncardo6687]

what if you plug it on the power bank with qc.2/qc.3 that can handle 12v does it make a difference?

[@gurribuy]

It takes 5v as input, doesn't matter if you connect a fast charging capable or normal powerbank.

[@doncardo6687]

Gurribuy got it thnks

[@SnowyPe]

Very informative.. Thanks

[@youseflativo3451]

Good day. How many hours you can use a 20000 mah powerbank before to power your router?

[@akhan999]

I have netgear xr500 that 12v 3.5amp? Would it work?

[@gurribuy]

No.

[@yurigagari9676]

can you say what module used in this ?

[@amitgupta12knp]

Will it work on my Anker power bank powercore 20100? My power bank does not allow charging and discharging at same time. Also, there is a button to push to start the discharging. My jio fiber router needs 12v 2.5Am and my power bank generate output of 5v 4.8Am. Can you please suggest right cable to use this power bank as ups.

[@gurribuy]

This cable only support current less than 1 amp. If i find a cable suitable for jio fiber then i'll let you know.

[@Santoshkumar-pk9sg]

Thank you for your video...very knowledgeable. N ...tricky... thanks again

[@gurribuy]

Thanks for your time.

[@soumiksaha720]

@@gurribuy bro can i use this 9 v cable for NiMH battery pack (4.8v)charging by using power bank. Power bank output voltage 5v 2a . Plzz reply

[@austinnx9636]

I'm having one router and one modem Can I connect both with dual Port Power Bank and 2 cable. Pls rply fast

[@gurribuy]

IF you powrbank current output is about 4.8A then maybe you will be able to do that otherwise not.

[@austinnx9636]

@@gurribuy thank-you is that type of powerbank available

[@austinnx9636]

@@gurribuy or can I use 2 Power Banks

[@gurribuy]

@@austinnx9636 Such powerbanks are available but they are very expensive and not many options are available in india. So, buying two powerbank is better option.

[@austinnx9636]

@@gurribuy I have seen Anker 20000 powerbank with 4.8 A. Should I buy bro

[@majushphilip2443]

Any recommended power bank for Tplink 9v router?

[@alienwolfx3758]

Rommoss Sense 6P

[@5minuteskidsdrawings286]

Will it will work for jio fiber router..

[@NiteshSingh-cb3gs]

How long will it power the router with a 20000mah bank?

[@cesarepng8774]

Very very much time, like 5 to 10 hours depending of your router

[@yasedky]

My router is 1.5 amp . Will this still work ?? My part back gives 5v 2.1A

[@gurribuy]

No, this will not work.

[@malikshaik6675]

Sir how to identify the pin size..i have got the hathway router?please suggest i want to use it with mi power bank...router is 12v and 1amp...

[@gurribuy]

do you have other 12v adapter in your house, like from your settop box. if a normal 12v adapter fits your router that means this cable will also fit your router. Make sure you buy the 12v version cable.

[@malikshaik6675]

@@gurribuy yes sir the output in the adapter it is written as 12 v =1A...but if i buy the product you have shown whether it will fit my dc pin or not...i am not sure about my pin size...2.1mm or 2.5mm...how to identify the size

[@gurribuy]

@@malikshaik6675 its. 2.5mm.

[@malikshaik6675]

@@gurribuy ok sir, if i buy the product you have shown in the youtube will it support in mine router or do i have buy a different one...

[@pulithawanniarachchi7991]

When connecting the power bank and router by using this gadget, the power bank is off and it does not turn on the router. But router can be turn on by connecting this gadget to laptop usb instead of power bank. Why??

[@gurribuy]

i'm not sure what could be the problem. Every powerbank is different may be your powerbank is not sending enough power when connected with this cable.

[@myhomelab]

sir if i use 1ampre powerbank?

[@juvylynsoliven3452]

Does the amper matter?

[@gurribuy]

yes. Amper matters. If your modem or router needs more Amps than this cable can supply then your router or modem may not turn ON or it will turn ON & Off again and again.

[@socialactivist2647]

Please tell connector for 12v - 1.5 amps modem​@@gurribuy

[@afsalkt1751]

If you recommend this for longterm use...?? The modem will work continues in 24×7 ...?? It's reliable..??

[@rahuladdanki]

is there a way/device, like when power from the main grid is available router depends on the grid and when the power goes off it will start consuming power from powerbank. Thank for the video.

[@gurribuy]

you need to buy a powerbank with pass through charging. OR, you can also buy a router ups.

[@rahuladdanki]

@@gurribuy thank you

[@deepeshh1]

Can it wil support Hathaway broadband modem?

[@jijith1309]

Bro.Can you send me the link for that cable?

[@tharangigeek991]

If the router is 12v/1A and power bank is 5V/1A,can I turn on the wifi router using the 5V/1A power bank with a 5v-12v DC inverter.

[@gurribuy]

NO. you will need at least 5v/2.4A. for this to work . Also. 5v to 12 cable does not give full 1A. So, if your device takes full 1A, in that condition also it will not work. What router are you using anyway.

[@tharangigeek991]

@@gurribuy huawei,dialog broadband router Sri Lanka

[@vinukanethmitha315]

Can we coonect this usb to desktop pc directly

[@vinukanethmitha315]

Plz reply

[@gurribuy]

@@vinukanethmitha315 No, because desktop's USB port 2.0 can only output 2.5 watts and USB 3.0 ports can only output 4.5 watts, which is very less than what we need for this cable to work.

[@Pranav341]

@Gurribuy Can You Elaborate how much up time for the router when Power bank from 100 % to 0 % with this boost cable ?

[@gurribuy]

i have not tested that. But a 12v 1A router should run for at least 4 hours +_ using a 20,000mah powerbank. Exact no can only be found by actually testing with your powerbank.

[@sonum945]

Easily you can expect 12 hrs+ with 20000. I have the same setup with 10000mah and getting 7-8 hrs with full charge.

[@MdIsmail-qn7ug]

sar we can use normal phone power bank to 9 volt pls reply

[@gurribuy]

yes, any normal powerbank will work . Just make sure you powerbank support at least 5V 2A.

[@abhishekjethania1860]

Hello bro thax for making this video.. But mujhe 7volt hi chaiye uske liye kya kru mai. 5-to-7out put

[@Kalai_Josh]

Can I connect laptop to router?

[@vivekputhukode]

How long will get

[@keramotali5299]

5 v চার্যার দিয়ে অনু রান করা যাবে কি

[@aniketangane9568]

Bro i have power bank with output of 12v 1.5a.. do i still have to buy this 5v to 12v converter or can i use a normal usb to router cable???

[@gurribuy]

which powerbank do you have.?

[@aniketangane9568]

@@gurribuy Mi 2i 10000 mah

[@gurribuy]

@@aniketangane9568 You can't get 12V out of your powerbank without a trigger. So, you will still have to buy the 5v to 12v cable.

[@aniketangane9568]

@@gurribuy ok thanks bro

[@zaidchoudhary319]

Can I use a 9 volt 0.6 amp router with this Will this burn my router? Please help

[@gurribuy]

buy the 9v version of this cable. and yes, if you use the 12v cable it will damage your router.

[@vishnu364]

I have a new Mi 20000mah powerbank which supports fast charging 18W and 12V output. Will there be a problem if I use this cable for my router? My router is a Dlink dir 600m It needs 12V 0.5amp of power.

[@gurribuy]

yes, this cable will work with your router. make sure you buy the 12v cable not the 9v cable.

[@vishnu364]

@@gurribuy cool.. Thanks for the reply👍

[@anmolsharma4999]

@@vishnu364 Bhai did u purchase it? Is it working fine?

[@jrrcats574]

I connect it to my modem/router but the "LOS" light is red and the router reboots. is the cable not working? is the power bank?

[@gurribuy]

The router or modem only reboots when there is not enough power. What is your modem/router power requirement.?

[@jrrcats574]

@@gurribuy 12v 1a

[@gurribuy]

@@jrrcats574 The cable does not provide full 1 Amp that could be the problem. Also, your powerbank must be capable of at least 2.4 amp.

[@jrrcats574]

so then cable is the problem do you recommend me get a usb-c PD 12v adapter cable? the output of my powerbank from the PD port is 12v 1.6A

[@gurribuy]

@@jrrcats574 yes , PD would be better if your power bank is capable of PD. You can also buy a 12v PD trigger and add your own cable. kzbin.info/www/bejne/nX-6g61ugtaNrLc

[@AnupomAG]

Is it risky to use? I mean if by chance the voltage increases to 12V on a 9V router then it's done for. Btw my router is 9V 1A but the 9V booster cable I was able to run it with. 5V 1A powerbank. Any thoughts on that?

[@gurribuy]

I don't think 9v would turn into 12v. (voltage can go down though) So, i don't think there is any risk. Now, Router would probably consume full 1A. when you are using all the features of your router, all the ports on the router are utilized at the same time. Also the current rating on the products is always a little higher than they actually consume.

[@AnupomAG]

@@gurribuy Ah makes sense. Thanks a lot.

[@vincechenatu]

Can I use it for Cordless phone?

[@gurribuy]

i have explained what this product is capable of and what this product can do. I don't know what phone you have and how much power it takes.

[@vincechenatu]

@@gurribuy I mean cordless phone which is connecting to a land line phone . It is for portable use.Hope you understood.

[@gurribuy]

@@vincechenatu If your phone needs 12v 1A then and used a DC 12V jack then you maybe able to use this cable.

[@kirant2849]

bro, Its really really very useful video. I will forward to my groups. By the way, will it work for Jio Fiber WIFI box which it showing in the wifi box backside as 12v/2A. Please help

[@gurribuy]

it supports 12v 1A only. i don't think it will be able to run a 2a wifi box.

[@kirant2849]

@@gurribuy thx bhai. Any alternative way ? Or should i buy UPS. Please suggest

[@gurribuy]

@@kirant2849 yes, UPS would be a better option. Or if you have inverter in your house just connect the box to one of the inverter socket in your house.

[@siddharthtewari5429]

Is there a cat vs dog fight in the background ?

[@vigneshwaranms]

This is priced too high. Guys if you know some basic electronic you can buy a buck booster for 100rs in amazon and make 5v to 12v from that. That required little work.

[@MK-ro7ee]

Thanks

[@gurupramodashetty452]

Yes also we need to have a specific overvoltage protection for the router or modem i used a buck converter set it to 12 v and connected it to my modem it didn't turn on when i plugged it into the power adapter also it didn't turned on when checked the output voltage of the converter it was 22 volts when i had set it to 12 v which damaged my modem

[@PKpk-or2oe]

Can I connect 12v. 7.5ah battery to rooter ???

[@katenombres6179]

Can i still use it even if I bring it outside home? Lets say if nagbakasyon.

[@gurribuy]

Yes, you can use this outside with a powerbank. But, it will not work with devices that take less than 1 Amp.

[@kozeexsvaper7037]

I use on my Huawei B315 and the modem keep on off and turn on ,its seem like the power not enough

[@gurribuy]

yes, your modem is not getting enough power it seems. Maybe be your modem needs more current than this cable can supply. Make sure you powerbank is at least 2.4A capable. and make sure you are using a 12v cable not 9v cable.

[@newcreative9543]

Its contain step up module in it

[@antoniosolis9172]

I think can use the MT3608

[@gurribuy]

i tried mt3608 but it did not work for me.

[@maimulhoque256]

How much time i run the router if my power bank 20000mah ?

[@gurribuy]

about one hour and few more minutes.

[@Smart_boy2001]

@@gurribuy but why ubs gives more then three hours with 10kml ,why there is a difference ?

[@tejas2812]

I'm unable to do this mi 3i powerbank plz reply plz plz plz

[@gurribuy]

do you have the cable? what are you trying to run with this cable.?

[@tejas2812]

@@gurribuy I have this cable . Mi 3i powerbank se input nahi le raha hai Router 12v 0.5A ka hai . kuch batao kya karu plz plz

[@gurribuy]

@@tejas2812 make sure you bought the 12 volt cable. check the voltage of the cable with a multimeter, If you have any other 12v device try that also make sure that router is ON.

[@tejas2812]

@@gurribuy yes I have brought 12v cable . I have same cable that you have . Cable is working when I give input from laptop to router ,then router is started well, but, when I connect it to powerbank to router it doesn't give output.router doesn't work

[@gurribuy]

@@tejas2812 So, atleast the cable is working. Maybe the powerbank is the problem. But, i have tested the cable with mi 2i and it worked without any problem. Mi 3i should also work, can't really tell what seems to be the problem. Is your powerbank charging other devices.?

[@huzaifamian1641]

Ye hum kaha se le sakte hn bro

[@maddymadhan7284]

My Power Bank is mi power Bank It gives 12 v but I can't connect roter with usb cable ... It trun on and off again and again ... Why ??? What problem.... Power light only on off again gain.... Can't get internet

[@gurribuy]

Its because your modem need more current. than this cable can supply.

[@maddymadhan7284]

@@gurribuy I am not buy this boost cable bro.... I just tried Normal usb dc to router power cable .... But my mi powerbank output (12v 1.5 a 18 watts max) But I get power light only can't get internet light.....? Ur suggestion boost cable is suit for me ( Airtel fiber router [ it's adapter 12v 1.5 a ] ) 🤔🤔

[@gurribuy]

@@maddymadhan7284 powerbank only gives out 5 volts. unless you use a boost circuit. or a fast charging trigger. So, a normal dc cable will not work. Now, this cable is only suited for routers upto 12v 1A or less.. So, you have to first test how much current your router takes. If your router takes less then 1A and works normally then you may buy this cable.

[@maddymadhan7284]

@@gurribuy om brother thanks....

[@NikhchansGaming]

8:35 and you're still alive??!!

[@MOHAMMAD_JALAL_UDDIN_RUMI]

Brother, Is it still working?

[@gurribuy]

yes, it is still working.

[@gandavllisuresh1673]

12V-1.5A Run bro please tell me bro

[@gurribuy]

Everything is in the video. The answer is NO.

[@gandavllisuresh1673]

@@gurribuy 😭

[@gandavllisuresh1673]

Please bro 12V-1.5A Run or not Run please tell me bro

[@gurribuy]

@@gandavllisuresh1673 NO it will not run. I just told you that.

[@gandavllisuresh1673]

@@gurribuy increase tha 12V-1.5A bro

[@botbuzz3020]

No extra accessories needed just put the usb plug into the powerbank it runs well & good

[@edwinmandac3131]

This same product is not working on my modem

[@jquick51]

Did not work for me,router 12v2.5a and power bank is 5v2.1a, it worked for about a minute then stopped,now router will not work at all.

[@jquick51]

After watching your video again,you did say devices with 12v1a,so that was a mistake on my part.

[@gauravpatil1459]

Mene apka ye video dekh ke mere 9v ke router ke liye ye cable order kiya... Lekin its not working with my 20000mah Mi pawerbank.... But its working with mobile charger🤦‍♂️

[@gurribuy]

Does it work for few seconds with the powerbank or not?

[@gauravpatil1459]

Nop....mi pawerbank support 5v 9v 12v i just don't understand why it is not connecting... Do you have any solution over this?

[@gurribuy]

@@gauravpatil1459 it should work, i don't know what is happening with your powerbank. Because, you just said the cable is working with your charger.

[@gauravpatil1459]

@@gurribuy ok thanks

[@edwinmandac3131]

My power bank don't accept the cable

[@vipulsinh4655]

He mereko chaye kha milega

[@Live4Punjab]

ni power bank not work

[@azharmehmood9698]

yeh kider seh mily gi

[@gurribuy]

links in description.

[@azharmehmood9698]

@@gurribuy plz send your phone number

[@azharmehmood9698]

kider pakistan mean ho ap

There is no way this converts 5v 2.4a to 12v 1a. If it would it would have a 100% efficiency. 0.9a is more realistic.

[@rheanmaco6609]

????mah?

[@Shivansh.Mishra]

Didn't work for me even though i used mi 20000mah power bank

[@anandsingh8987]

Your powerbank will shutdown after few days, as your input power will be less. You Amberene power bank should support more than 2A, 5V charging to support and become as UPS

[@adamsuleiman5635]

Why would it shutdown ?

[@anandsingh8987]

@@adamsuleiman5635 if the input power is less than out put power. Input has to be higher. You can calculate

[@denzowarmbad5486]

You telling me that this is not worthy ?

[@SaikumarN1993]

600 is too much for the product i guess

[@Abhi-nb1xo]

𝟏)𝐇𝐨𝐰 𝐨𝐟𝐭𝐞𝐧 𝐝𝐨 𝐲𝐨𝐮 𝐮𝐬𝐞 𝐭𝐡𝐢𝐬 𝐬𝐞𝐭𝐮𝐩. 𝟐)𝐈𝐬 𝐢𝐭 𝐰𝐨𝐫𝐤𝐢𝐧𝐠 𝐟𝐢𝐧𝐞 𝐭𝐢𝐥𝐥 𝐧𝐨𝐰?

[@Abhi-nb1xo]

1)ʜᴏᴡ ᴏꜰᴛᴇɴ ᴅᴏ ʏᴏᴜ ᴜꜱᴇ ᴛʜɪꜱ ꜱᴇᴛᴜᴘ. 2)ɪꜱ ɪᴛ ᴡᴏʀᴋɪɴɢ ꜰɪɴᴇ ᴛɪʟʟ ɴᴏᴡ?

[@HeSavesMankind]

A re you aware that a cat was killed by a dog at 2 minutes?

[@daimos6686]

not efficient consumes too much power.

[@EmilePolka]

none of the 12v booster on 5v power source can provide any near at 1amp of current. just do the math, the best it can provide is around 480ma @ 12volt power, and this is given that you plugged it on a 5v 2.4amp power source. the only best thing I can see this work on 12v 1amp output is using a type c power source that have quick charge. depending on the charger/power bank, it might even be able to throw a native 12v power without boosting, that's just how quick charge power works.