How to see last fault code on Electrolux EWF12832 Inverter washing Machine

Electrolux washing machines have the ability store fault codes in the memory of the main PCB. When a fault arises due to a faulty part, the main PCB can help diagnose the problem with the machine and make the repair fast and easy.
1. Press the power button to turn on the machine.
2. After the lights have turned on, simultaneously press and hold the START and VAPOUR buttons until the lights start to flash.
3. Turn the dial clockwise to 11th position (Refresh Mixed cycle) and the last stored fault will be displayed on the LCD screen.
4. To clear the fault from memory, press and hold the START and VAPOUR buttons for 5 seconds, write down the code before clearing.
To see what the description of the Electrolux washing machine fault codes, go to: appliancefault...

[@lydiaxiaodihuang9580]

How do I reset this model? I bought a second hand one and the temperature and spin touchpads are not responsive at all.

[@bmci007]

I have a E59 code on my front washer, model: 12832. Are there any fixes, or does this require a replacement part?

[@fathatajuroshid6610]

Hi, I’ve just found this and my machine is exactly the same as this one, mine has e10 code everytime the machine was working, but then i just press the start button again and it works normal again but then it’ll happen again and so on, can i fix the error with your method or i should replace the parts? I’ve been searching for the solution on internet and found that e10 is related to the water coming into the machine, so I’ve tried to clean the filter mesh inside the inlet but the problem still there, thanks so much for your help!

[@ApplianceFault]

Hello, Most likely one of the solenoids isn’t working properly. Replacing the solenoids fixes this problem in 95% of cases

[@fathatajuroshid6610]

@@ApplianceFault thanks so much

[@zyde007]

Tq Sir. My machine is WW12932 and there is no vapor button..The machine won't start. Start/pause button keep on blinking..can't retrieve the fault code

[@ApplianceFault]

try to do what I show in video but instead the vapor button, press the button that you have on your machine where the vapor button should be, some machines have a prewash or rinse button instead of the vapor button

[@marinamcintyre9876]

I have code E91 on our EWF14012. Could you help with a fix?

[@MrWeinfook]

ewf7525eqwa...i need video for reset ...can you show us ?

[@moneyfalcon267]

What to do if my machine says E57

[@definitaualupe-tai8724]

I need help on mine please. Mine is set and it shows the time (as in mins), 40 deg C, spin @ 400, dial @ bedding...BUT, it doesn't run at all. However, the countdown of the time is occuring anyways (just no washing). What to do?

[@ApplianceFault]

You need to retrieve the fault code out of your machine to see what the problem is. Also, check that the belt hasn’t come off.

[@definitaualupe-tai8724]

@@ApplianceFault I did that and it revealed "ESC". What does it mean?

[@definitaualupe-tai8724]

@@ApplianceFault see this video. kzbin.info/www/bejne/mIemYn96bpiNias&lc=z23vjlc4dybec1pvkacdp43akhr0vnh4huq1zwxji3dw03c010c

[@ApplianceFault]

E5C error is a over voltage error on the motor control board. Check all plugs to make sure nothing is loose. Check the power to the main PCB. If the supply voltage is correct, then most likely it’s the motor control board is at fault.

[@definitaualupe-tai8724]

@@ApplianceFault would it cost a lot to replace the motor control board? Or would it be better to just buy a new washing machine? What's your opinion please. Thank you for your help.

[@ismiarina7985]

hai sir, i need your help and guide.. actually my washing machine have a some error.. for example i just select cotton and the timer set 1 hours 25 min and then i click button start... after 25 min listening sound "beep" and at the screen appear E25 and suddenly washing machine stop.. i just click button start washing machine start again... can you help me.. 🙏 it waste my time to check and click button again and again 😢😢 as i know washing machine after set all the timer no need to click any button after that right? it was prosessing all of this clothes until finish.. running by their own...

[@ApplianceFault]

Hello, what is the model number of your machine? this machine in the video does not have this type of error. Is your machine Electrolux?

[@ismiarina7985]

sir actually that word E25 appear on screen meaning for what? my model is electrolux EWF12022

[@ApplianceFault]

On your machine e25 error will be a problem with main control board.

[@ismiarina7985]

@@ApplianceFault can i fixed the problem using your technique likely in the video? that means word for E is a error?

[@ApplianceFault]

To fix the problem the main control board needs to be replaced. But before replacing the control board, it’s best to have the machine inspected by a technician. Sometimes there are things that can cause the control boards to fail.

[@carenqueendijamco8798]

paano po magtanggal ng childlock