How to Service a Zebco Prostaff 20/20

[@user-cq9gu4lc6c]

Great video. I fixed my line brake with a 1 1/4" OD x 1" ID x 1/8" O-ring. Popped right on, no glue, and it stops the line.

[@OutFishing13Matthew]

Nice! My next video I finished filming is on a Zebco 20/30 with a rotten line brake.

[@sterlinghancock1157]

I have begun to disassemble, clean , and reassemble my Dad’s reels.So far 4 reels complete.Today i disassembled a ProSTAFF 20/20. Your video on this reel was very helpful when reassembling! THANK YOU very much! However, I do not have the equipment to sand down a RUBBER GROMMET to the correct size. Guess That I will just put on a shelf and remember all of the days that my Dad and I, fished using this reel! All of your video’s are so helpful! Thanks again!

[@OutFishing13Matthew]

See if you can find a rubber o-ring that will work. Good job getting those Zebcos back into operation!

[@barrymiddlebrook6800]

Perfect , tuned up both of my old non-functional units that we had bought for the kids when they were young. They work like new again and ready for brook trout and other adventures when the kids they visit as adults now. Sadly no grandkids yet.

[@OutFishing13Matthew]

Nicely done!

[@rogerwachal3718]

great video, I like how you show the step by step. I;m going to rebuild,mine. some threw it out along with a zebco 33, and a nice Shakespeare rod. On the 33, it needs a new mount

[@OutFishing13Matthew]

Awesome! You'll be amazed how smooth and well they work after they get serviced, oiled and greased, with new line.

[@rogerwachal3718]

@@OutFishing13Matthew Is there a current way to put the line on ? I have never had to put line on before. Because, I don't fish very much

[@OutFishing13Matthew]

@@rogerwachal3718 Yes, I have several videos. Watch this one. kzbin.info/www/bejne/fIrYn4aaecysqZY

[@keithnavarro2930]

Thanks, Matthew, for another great video. I've saved most of your reel repair videos. Great way to spend an evening during a blizzard. I'll be servicing my ice fishing gear, soon.

[@OutFishing13Matthew]

Ice fishing is just another 3-4 months away depending on where you live. Do you use Zebco spin cast reels for ice fishing or do they get to much ice in/on them?

[@keithnavarro2930]

@@OutFishing13Matthew Matthew, I don't use spincast reels for ice fishing. I have a few spinning reels but like to use jigging sticks and tip-ups. I made a "Green Hornet" just like Max Goldman used on "Grumpy Old Men". I've used it to fish a few times. Caught some bluegills on it.

[@OutFishing13Matthew]

@@keithnavarro2930 Cool. It's been a couple years since I went hard-water fishing.

[@dongill8769]

Very nice reel, I've never owned one of those before. Thank you for sharing.

[@OutFishing13Matthew]

Thanks for watching.

[@richardmoorman9960]

Excellent

[@OutFishing13Matthew]

Thanks for watching.

[@tomritter493]

Looks like a 202 on the inside .I love these reels zebco I mean .best ive ever used really

[@OutFishing13Matthew]

For the most part it is very similar. There are some differences though. Thanks for watching and commenting.

[@N2RI1]

202 dont have ball bearings etc

[@mercifulhorror4935]

I've learned alot from your videos thank you.

[@OutFishing13Matthew]

You're welcome. Thanks for watching

[@emoryfindley8702]

Hello- I use my old reels. One of the biggest problems I have found is the plastic foot becomes brittle with age and cracks/breaks. I now lightly score the bottom and interior of the foot then fill with JB weld. Smooth it off with a popsicle stick. It gives the old plastic a “Skeleton” of sorts. Have not had one break since-

[@OutFishing13Matthew]

Wow that is brilliant!. I bet you could JB Weld a strip of aluminum can on there and make it even stronger. Composite reel foot! Man that would work! Keep sharing your great ideas!

[@edwardroberts2997]

Hello Matthew, I hate to think about what is coming Weatherwise still have not gotten out guess I'll call it quits for this year. trust you and the family are all well.

[@OutFishing13Matthew]

We are doing fine here in Utah. The thing we have contended with for over a month is the smoke from the fires burning in CA and OR. Terrible. Just Terrible. Hope you get out a little bit this year. I got some good fishing videos coming soon. Stay tuned.

[@edwardroberts2997]

@@OutFishing13Matthew OK, Matthew I check every day to see if you have entered a new video sorry to hear about the smoke we had here in Ct some two weeks ago from Canada fires at this time the temp. here is 60 deg. that's cold for this time of year here in CT. You know Matt for as long as I have been alive I have never seen such Weather as long been around have seen this year well enuff for now going to make something to eat I hope that the smoke goes away soon for you By for now Hello to the Family. Ed

[@andrewhondo]

my paw had a 606 prostaff usa like this he loved that reel

[@OutFishing13Matthew]

I have another 2020 Prostaff that I have on a pole. It is the Karle Malone model. Very nice reel. I still need to take this one fishing.

[@nickacree9669]

I've been look for the Karl Malone reel for about 3 years now

[@ratoneJR]

like a fancy 202. thank God for the newer gearing designs.

[@OutFishing13Matthew]

The Prostaff was meant to be a "professional" quality of reel and made for use in salt water, since all the part were corrosion resistant. It is a nice reel, but you cannot get new parts for it. I think this one will just stay in a collection.

[@BABennett73]

Great video! But I need at least a few Zebco parts for my ProStaff reel. Do you have any good sources for the thumb stop or star drag? Thanks!

[@OutFishing13Matthew]

I don't. The best place to check is the Facebook, Zebco, Shop and Swap. Some fellows have lots of parts reels. Take a photo and make a post. Someone should reply. Tell them Matthew from OutFishing13 sent you.

[@rickster6.0]

Hi Matthew, I've found an old ProStaff 20/30 that my dad bought for my mom, probably back in the late 70's or early 80"s. I'm definitely going to fish with it some this year and wondered if you could tell me what size and how much line these reels were rated for? Thanks

[@OutFishing13Matthew]

Sounds great! I would recommend 8-10 pound test. I am guessing you can put 100 yards of 8 and 80 yards of 10. Use a quality mono.

[@OutFishing13Matthew]

You can also find information about that reel in the catalog vault on zebcocollectors.com

[@AEStudt]

Hey there Mathew you wouldn't have a vintage front cover for the 733 Hawg would u

[@OutFishing13Matthew]

Sorry, I don't. Check Ebay. I saw one on there for $10 plus shipping. You could also check the Zebco Shop and Swap facebook page. facebook.com/groups/387880111984612 There are guys on there that have lots of spare part.

[@bobbyhempel1513]

I did exactly what you did but that little anti reverse plate thingy the funny looking slab of metal that just sits in a hole and is supposed to do something keeps falling out of that hole after I get the real put back together what am I supposed to do about this?

[@OutFishing13Matthew]

Hmm. Something may not be all the way back together, like the main gear. Also, make sure it is put in the correct direction.

[@craigwalling8185]

I have a couple of old Zebco 2010s Where do I find replace rubber for the line stop?

[@OutFishing13Matthew]

You'll have to find something to repair it with. A rubber o ring or grommet

[@frankhood8563]

When you service the ZEBLO 2020 you failed to show the spring in the switch at the back of the real and how it went in to allow the switch to pop back out the spring can be broken not allowing the switch to come back out that can be part of the service on this ZEBLO also, the spring can break or come loose quite frequently on this model

[@OutFishing13Matthew]

Hey, thanks for the feedback. I will have to do a new video in the future.

[@vtrombly]

Matt have you used the zebco omniflex and Cajun lines are they any good?

[@OutFishing13Matthew]

Yes, I have used both. They are good to excellent.

[@RickMahoney2013]

I have four 2 2010’s 2 2020’s and 1 2030 but mine have all black plastic covers

[@OutFishing13Matthew]

very cool!.

[@MxRyder19]

I also have a 2030 that still works perfectly. First reel my father put in my hands when i was 7 yo. My nephew fish with it now from time to time. The push button is insanelly satisfying !

[@richardmoorman9960]

You know anything about a zebco 77 with the wooden handle?

[@OutFishing13Matthew]

I am sorry, I don't.

[@N2RI1]

just got a 2010 model

[@OutFishing13Matthew]

Nice

[@N2RI1]

it says ball bearing drive but cant find ball bearing inside, and it has 2 snaps holding inner works into housing that are difficult to press down to release not shown on this video. also the 2010 is near same diamiter and size as the micro reels series. mine says 20/10 and is black with gold cap. the guy I got it from had another that said 2010 and was all silver color. only schematics online say for 2010b/2020b but show dif housing and parts with reversable crank right/left side and 2 bearings. then for model 2010n/2020n that look like mine and this one in video. no 2010ps/2020ps found

[@OutFishing13Matthew]

@@N2RI1 the one bearing will be on the main middle shaft. That's it.