How to service an Espar D2 Diesel Heater | Full Teardown and Rebuild

With cooler weather approaching, I decided its a good time to service my Eberspacher (Espar) D2 diesel heater. Its been a while since this heater has been serviced and I want to make sure it runs trouble free this winter. This video walks through the entire process of disassembling the heater, cleaning it out, and reinstalling the parts with new gaskets. This service procedure is not difficult to complete. With this service complete, I'm certain my heater will keep me warm this winter.
** Affiliate (Commissions Earned) Links to Products Used **
D2 Service Kit - amzn.to/3XrAeJa
Small Pick Set - amzn.to/3XrAeJa
Long Nose Needle Nose Pliers - amzn.to/4dFPNTa
Espar D2L (newer version) - amzn.to/3XmS3J0
** Visit My Website **
www.homebuiltw...
** Check Out My Handmade Guitars **
www.hayleyguit...
** Save 10% and get some awesome CA Glue from Starbond **
bit.ly/2WJmxbL
** Ways To Support HBW **
www.homebuiltw...
** My TeeSpring Store **
teespring.com/...
** Check out my Amazon Shop **
www.amazon.com...
** Join the HBW Built not Bought Facebook Group **
groups/homebuiltworkshop/
** Connect on Social Media **
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
** My Mailing Address **
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#dieselheater #eberspacher #homebuiltworkshop

[@MCsCreations]

Nicely done, man! 😊 And yeah, the cold weather is definitely not funny! It's been pretty cold down here in Brazil the last days... But it's getting better. Anyway, stay safe there with your family! 🖖😊

[@robertr4193]

That's a pretty neat looking little heater. I've never seen one quite like it. For the space you are using it in Hopefully it does the trick at keeping it warn enough to work in your shop at least where it is tolerable in the cold. Oh by the way I think I finally found a surveyor to get my property surveyed so hopefully before too long I will be able to build a shop/garage so I'll have a space to be able to work in.

[@Neptune730]

For the socket you could go to Lowes or some place that sells individual sockets and grind a slot with an angle grinder. Probably cheaper than buying the branded tool. Also to keep from having to disassemble it again next season. Print some TPU caps for all the openings. Then you'll just have external dust to get off.