How to set endplay on your Tremec T-56 Magnum Transmission

[@boostedjb5168]

Awesome video!! made swapping my mid plate a breeze! And customer service was awesome had an issue and got it resolved super quick and easy, thanks for the tutorial

[@Supercharged111]

My T56 that I've been into too many time had NO discernable in/out play on the input shaft. I set it up with dial indicators and wiggling crap back and forth to decide what shim to use. I had a single .046" shim in there and using this method I landed at a .057" shim stack. I never had any confidence in my previous method but this is foolproof as you cross the line both ways. Definitely how I'm going to set them up goong forward.

[@brockbauer1079]

Same process for a regular t-56 out of an 05 GTO? I dont have a shift rail detent and a few other things

[@WayTooStrong1]

Why does this method work better than targeting a specific spacing (“end play”) such as that in the 2002 t56? Is this a good practice for all transmissions, or just for the magnum?

[@BowlerPerformanceTransmissions]

This is what we have found to work the best for all T56 and Magnum units. If you have something that works well for you, stick to it. Thanks!

[@sategllib2191]

I'm guessing this works the same for a t45 since they're very similar

[@streetking9895]

Could have done it without making all the noises from your mouth grrrrr.

[@BowlerPerformanceTransmissions]

Well.... We sure appreciate your feedback.

[@shannonsisk]

What?

[@SoCalK5]

Was that really necessary? Grow up.