How to set the correct spraying pressure on your airless.

[@Anth_71]

Old mate explained more in 3 minutes than the manufacturer did in 3 hours of videos. Legend!

[@Maghanashi]

Ali, you're awesome mate. I thoroughly enjoy the depth and brevity of your videos. You tell a lot in as few words as is necessary.

[@littlehouseinthecove3570]

Great info, help me out a lot while I was setting up my sprayer on a job. Thanks for making this video, it was very helpful My x7 Graco sprayer is definitely the sprayer for me now that I have it set up correctly

[@justcruisin109]

This was really helpful - clear, to the point with visual demo - can’t ask for better :-) Cheers

[@rbglenn1]

Nice, clear, and concise demonstration.

[@pinecone5058]

Thanks for your time, this helped me understand what I was doing wrong

[@thedalz5308]

Great video, what would i need to do if its pushing out too much paint in the centre of the pattern. Thanks

[@fredkite]

Fabulous advice, thank you. I recently purchased the Wagner HEA Control Pro 350 Extra and the manual is very poor, I literally didn't have a clue as to what pressure to use.

[@simplicity6564]

For those of us with hearing impairment, a lapel microphone will stop the echoing in your videos and make it louder and clearer. Thanks!

[@susanj6761]

Hi thanks for your advice on the spitting problem I had yes it was the gun thank you.. one other problem I’m having is tiny bubbles showing up on trim when spraying semi gloss

[@westsprayairless8763]

It's a reaction between the base coat and top coats, you need to discuss it with your paint supplier and go with their recommendations.

[@kirkmachin6597]

Awesome. Great explanation and demonstration for the less experienced. Now I can do it correctly without too much trial and error. Thank you very much.

[@jaxb32]

Great video! With the wagner hea tips, could a paint requiring 2000psi be used with 1500psi machine running the hea tip? Or is it trial and error? Machine I have is a wagner 350m… Thanks!

[@pameladawn7641]

I have a Wagner 350 pro extra but notice I get a pressure drop of 200 psi then kicks back in is this correct thanks

[@jessetruro]

If I want to throw more paint, do I increase my tip size and pressure?

[@westsprayairless8763]

That is correct, just make sure your tip selection doesn't require more LPM or GPM than your sprayers capable output.

[@jessetruro]

@@westsprayairless8763 Thank you for the response! Using a Wagner 150 with HEA, is that going to be able to move paint like your Graco? I guess I'm looking for a budget sprayer that can actually paint a house/multiple rooms.

[@westsprayairless8763]

@@jessetruro Youre best sticking to the tip sizes it came with, theyre not a high flow pump and would struggle with larger tip sizes

[@awolk]

@@westsprayairless8763 thank you!

[@ghasanahmed6159]

Thank you great info and demonstration

[@bobbackstein8009]

Great video. Thanks!

[@julietlaney2776]

What causes orange peel texture in the finish?

[@westsprayairless8763]

Pressure is too high, causing bounce back

[@julietlaney2776]

And how do you know what speed to spray at?

[@westsprayairless8763]

Work at a speed suitable to your ability and tip size

[@Habilio1]

Best instructions sofar

[@jeffchandler5520]

Thank you for the explanation

[@spbygga8123]

Hey mate, What filter do you recommend for a graco 395 with 310fflp tip?

[@westsprayairless8763]

SP Bygga Use the blue 100 mesh filter. Any tip size above a .014 you could use the black 60 mesh

[@spbygga8123]

West Spray Airless thanks. I have been running black on the machine blue in the gun. Just wanted to make sure I was correct.

[@westsprayairless8763]

SP Bygga For that size tip blue in the gun is correct.

[@kennyleung4340]

Thankyou

[@swordfish1120]

Good vid.

[@tommytton-mills9616]

Cheers mate

[@tommytton-mills9616]

Real helpful

[@alijeff6754]

Waste of time