How to Set the DCC Locomotive Address Using NCE

Рет қаралды 20,333

Күн бұрын

Пікірлер: 25

@Trains-With-Shane 3 жыл бұрын

This was a huge help. I just purchased a pair of N scale locomotives as "parts or not running" on eBay. When I got them I popped the shells off to find DCC decoders of unknown manufacturer installed. I thought these were DC units given their vintage as they weren't offered even DCC Ready from Life-Like. So I broke out my old Powercab and hooked it up but neither responded to locomotive #3 or the road #'s on the shells so I was at a loss. Stumbled across your video, went through the programming and it detected the decoders, allowed me to program, set addresses, etc. and now I have two fully functional DCC units. Not a bad haul for $37 in retrospect. I had thought that maybe the decoders had been smoked. They just needed a reprogram.

@TrainGeek 3 жыл бұрын

I am so glad that my video helped you out, and that your “dead” locomotives are alive and well now. Thanks for the comment.

@MrPusey1 2 жыл бұрын

Thanks so much - worked perfectly!

@TrainGeek 2 жыл бұрын

You're welcome! I'm glad this video was helpful.

@thebrummierailenthusiasts5329 6 жыл бұрын

Great commentary from you Steve

@TrainGeek 6 жыл бұрын

Hey, thanks, Scott!

@dundasjunctionmodelr.r-jam8267 11 ай бұрын

Thank you great video , going to subscribe your channel

@TrainGeek 11 ай бұрын

Thanks for the sub!

@choochoocharlie9388 4 жыл бұрын

You really help me Thank you!!!

@TrainGeek 4 жыл бұрын

I am glad it helped!

@mms8393 5 жыл бұрын

Perfect. Thank you.

@butterman-bz9wz 5 жыл бұрын

this was very help full thxs

@zacharylucisbecker2352 3 жыл бұрын

How do I change the sounds of my HO scale Berkshire locomotive

@TrainGeek 3 жыл бұрын

Do you what kind of decoder you have? It depends on that. Who made the locomotive?

@zacharylucisbecker2352 3 жыл бұрын

@@TrainGeek I have powecab DCC hand held remote for my Bachmann HO steam loco with DCC sound onboard

@Zidanbobotoh 8 ай бұрын

Thank you

@TrainGeek 7 ай бұрын

You're welcome!

@adamschubert1626 4 жыл бұрын

What does the function, assign a loco to cab do???

@TrainGeek 4 жыл бұрын

Adam Schubert hi Adam, this is to “hand off” a locomotive or consist to another NCE Powercab. Basically the locomotive you were controlling becomes the other controller’s and your controller gets what they were controlling.