How To Set Timing Ignition Timing With A Distributor

[@moddedmitch6835]

I watched 3 other videos trying to learn how to use a timing light. This is the video that taught me👌

[@sledge2307]

After watching 5 or 6 other timing light videos, finally one that actually explains how it works, now I feel confident, thanks 🙏

[@ig88xyz]

I learned more in this video than I have in my automotive class and a community college. My teacher reuses to show us how to use the timing gun because in his previous classes the students didnt pay attention. thanks mr. silva!

[@Mike-zb7ts]

Skilled people teaching complex tasks in clear, easy to understand terms is the internet at its best. Thanks for the video. A year ago I didn't know how to change my oil. Today I hoisted an engine from my car. A little Samurai 1.3 litre, yes, but still... Thanks again!

[@samhellaby9443]

Honestly the best and easiest video on how to use a timing light iv watched so far straight Faward and simple instrustions and well said no back stepping just straight to it thanks for this

[@razvandumitru2252]

Great, absolutely clear and straight forward. I have dealt only with diesel engines and I had no idea how ignition works, but this video made it really clear and simple. Great job.

[@LevelUpYourFandom]

of the 4 or so videos i watched on this topic, this was the first to actually, and clearly explain this whole system. i know this video is years old now, but its a good one for the archive

[@TrailPony]

I've been struggling to find someone to help with my '69 that has all the symptoms of timing being off. This video was so thorough that it makes me confident that it's something I can tackle. I was hoping the Carburetor was to blame, but that hasn't been the case. Thank you kindly for this.

[@eseogpanchito]

Glad to find this video with an explanation on how to adjust the distributor for timing. I will be adjusting my timing here soon in an effort to pass smog. I appreciate you guys making this video. Thanks

[@frankdavidson9675]

if you do not have a timming light get one money well spent you need one to set timming

[@jeremyrawls5896]

This was a great explanation on using a timing light and timing your distributor. Thanks

[@infinityprospectinginc2313]

Great video. Thank you. Question: My ford 302 bogs down at cruising speed. I haven't set total timing yet and am wondering if this might be the cause?

[@raphael6032]

Thank you this is the best video on timing that I’ve seen, to include the knob for the advanced timing. Good stuff!

[@angelmorfin3597]

What a great video absoluty learned alot! Im a new mechanic and im loving the trade

[@thomaswild9044]

This is almost perfect. I was also interested in Total advance timing as well.

[@robertclymer6948]

Thanks for including the use of a dial-back timing light. I love them.

[@TheJaredsalinsky]

Man this was a great video. Nicely explained and easy to understand with great visuals. Thank you. And what a bad ass car!

[@terryhicks694]

best video on the topic I've found so far.

[@ceelo3324]

Thanks for such a great and easy tutorial! Can you also explain vacuum advance timing? You briefly mentioned disabling it for this procedure, so I assume this is just for baseline timing. I assume vacuum advance is for when the engine is revved up and timing needs to advance a little more than a couple degrees before TDC? I understand that combustion may not be able to keep up perfectly with increased RPM's and shorter piston dwell times.

[@Stovokor41]

Was about to do this job this morning. Had to put it off though because timing is checked with the idle at a specific RPM and I dont have a tachometer.

[@heavylead1961]

i've been waiting for a video just like this! thank you

[@HolleyPerformance]

No problem!!

[@retrotech383]

im not a holley guy but damn you guys make good videos

[@miabellasalonandmedicalspa2822]

Adjust distributor while engine is running??

[@tomkelsey3512]

Yes !

[@1CoolHandNuke]

My Chilton’s manual states my car should be 2* BTDC. So should I be toward the “A” or the “R” on my timing tab?

[@rapfuelpodcast336]

dude spoke with knowledge. grazie!

[@dnlcast2]

Im so confused

[@zekielbarnes9618]

Naw

[@n8v-t-800]

I think I'm jus at the wrong video haha

[@LIGHTOFTHEWORLD256]

@@@

[@n8v-t-800]

@@LIGHTOFTHEWORLD256 @ what? 🤣

[@geraldkitt]

Been working on cars for a good 20 years now need a good refresh

[@moggie100th]

Excellent explanation! Thanks!

[@SamSam-us2fh]

Wonderful explanation 👍🏻

[@germanium1872]

This was a super helpful video!

[@michaelwade8859]

With the timing be off would it cause damage from test driving up the street for a few seconds amd the. Back down to park it

[@ELI-vm9yf]

Need more video like this!!!!

[@jonsaucier740]

How do you know where you want your timing ?

[@johncristopherlaron9208]

Hello Sir, my corolla 2e engine often fails to stop and if it happens, I had to loosen the distributor and turn it while cranking for it to start and when it started, I can use it again for several times before it fails and ang repeat the same process. I haven't experience any problems when it is running. Is there a need to replace the distributor or the issue here is just it's timing?

[@eduardorangel8821]

Does the timing cause the car to overheat? I just bought this pickup it sounds like it has some High Performance parts cam etc etc . . Not sure what all it has. I just know it's a sbc350, Thanks

[@Antiganos]

Timing is not going to change your heat output, that's all going to be up to your radiator, thermostat, and water pump/fans.

[@spiritualtube1735]

it is simole and clearvedio so thank you so much instructor

[@mikeinvegas1]

I have a 95 mustang gt i just finished replacing lower and upper intake manifold gaskets. I put distributor in checked timing its at 19 and cant move distributor anymore to change timing. Like im off. Do i nerd to take out distributor and then move it which wY?

[@jovanialvarez9310]

What did you do? I just got a car with a distributor

[@mikeinvegas1]

@jovanialvarez9310 took distributor out and turned it..reset timimg

[@1336kingsville]

How does this process change if I locked out my msd distributer

[@Jeepmen103]

Could a timing adjustment help to stop a “Dieseling”effect, once the car is turned off?

[@HolleyPerformance]

Poorly adjusted ignition timing can contribute to that, but isn't the only possible cause. Sometimes it's caused by a "hot-spot" in the cylinder due to carbon build-up or other issues.

[@n8v-t-800]

Hey everyone 👋🏼 im trying to search for some expertise in what I believe is a ignition system setup problem with a truck i jus recently bought

[@brentyates]

Thank You

[@85krash]

Any suggestions for an 02 L GS300?

[@grantkaye56]

Is it possible to set the timing initially upon first fire-up of a fresh rebuild with the engine only being turned over by the starter (i.e. no fuel)?

[@chickenfoundation9323]

The engine needs to be idling if you do that the starter will most likely burn up

[@britdragster]

You say that some timing lights won't work with capacitive discharge ignitions, like MSD, so which timing lights are suitable to use with these systems that don't cost a arm and a leg? Thanks.

[@j.antoniovarela5982]

Great video

[@miguiaculiacan]

Great vid, thanks !

[@rocknrollbaby687]

Hello on my 1990 Chevy Caprice dead center mark crankshaft it is not indicated engine Oldsmobile 307 I have backfire!

[@salvadorapodaca1213]

Were you find the timing number

[@frankdavidson9675]

if an eng will crank its timeing is close conn a timeing light to a plugwire see where it flasing balancer or pully should have deg marks allway set some degs be fore tdc mark losen dist housing slowly rotate to see flash on deg marks you want tighten dist it is timed

[@JB-1138]

Just had timing belt replaced. Now the idle is slightly too low. I need help fixing it.

[@tu.chiquitobombon]

can you make a tutorial on how to understand this tutorial

[@Minecraftineer998]

I have a GM 5.3L 350 Long Block, anyone know the optimized timing for such an engine?

[@charliedebach4022]

What if I don’t have distributor? I have a different type?

[@michealbarnes66]

Does anyone know what this plug goes to? Just replaced the ECM in a 96 mazda b2300. When I fired up the truck it ran for a little bit. Started a second time and it stalls out or doesn't want to start.

[@SamSam-us2fh]

After tdc got 3 more marks each like 10mm space, how to set distributor?

[@heavychevy2289]

What about total timing

[@youthmanrecords420]

Exactly.

[@brittneygraves6111]

My engine won’t fire can I use the light an time it using the starter lightly in waves, or does it have to be runnin

[@Cstoreri]

Has to be running....when you have your motor on TDC on compression stroke remove dist cap rotor should be at #1 piston.

[@ZR-vt2kc]

@@Cstoreri Thankyou this helped me aswell my motor in question doesn’t run

[@wilsongerman374]

Is the timing belt suppose to move over the pulley?

[@frankdavidson9675]

that belt is the fan belt it has nothing to do with timeing the timeing is set in the distrib.

[@frankdavidson9675]

there is a timing chain that connects crankshaft to the valve (pully) to set the valves at right time has nothing to do with spark timing that happens in the dist that adj. is made by rotating dist. housing to desired deg before tdc.

[@beachboy4106]

My 454 BBC was ‘pinking’ so after watching this I need to retard the timing. I don’t have a timing gun and can’t see any marking on the balancer so I’ll just have to move the MSD distributor a few degrees anti clockwise ( I think) . Thanks for the explanation, from an American car fan in the UK

[@nathanrice1796]

I liked the old HEMI there.

[@LEGENDofMADDOG]

My car won’t stay running tho So how am I supposed to do this

[@judgedayan9934]

Why didn't you mention the exact RPM in which you set the timing. Some cars idle at 600rpm, some higher, and that would make a difference in the timing advance.

[@jerryjarvis2827]

To the timing on a 96 Dodge van 3.9

[@mansouralhajri9046]

جيد👍

[@SOLDOZER]

So basically for a stock engine you want timing at 0?

[@Stovokor41]

No, the owners manual should mention what it's meant to be under specifications. Or try a repair manual for your model.

[@SOLDOZER]

@@Stovokor41 The owners manual for the 350 engine you got in the junk yard?

[@Stovokor41]

@@SOLDOZER you might be able to tell what it came from using the engine number?

[@frankdavidson9675]

set timing at 5 deg before tdc see how it starts and runs if ok leave as is --- you do not want fire too quick before tdc spark knock and poss. damage to pistons

[@frankdavidson9675]

no l zero is late firing piston already started down --- loss of power set a few degs before tdc

[@rezboy327]

👍🏽

[@nickrodriguez7293]

There's more to timing than with this guy's talking about. It's very important that you check your total advance timing once you reconnect the vacuum.

[@jerryjarvis2827]

FaceTiming on a 96 Dodge van ram 1500 3.9 cargo van

[@Peter_van_bjork]

👍👍👍

[@skippywinters]

I know a thing or two about cars and did not get a thing about the whole thing

[@hubertbryant5587]

If my light doesn't have a dial, msd distributor locked out what degree would be 36 degree be

[@iisaacm]

What if the car doesn’t start at all!!!

[@jordantroccia84]

Crank it and spin the dizzy

[@allywilkeforsenate]

The light have me a seizure 🤣

[@johnc.wunscheljr2873]

I have been 8 weeks and 2 speed shops and my new build don"t run Holley needs to step up and fix the problems don"t buy a sniper it is a pile of crap.

[@HolleyPerformance]

Hey, John. Please give our experts a call at 866-464-6553. We're more than happy to help!

[@redstuntsteve3974]

bro checked if the car was in neutral after starting it

[@HenryCaulk]

What if it doesnt start 😅

[@calebridesmtb8798]

Check to make sure your distributor isn’t turned 180 degrees. It should be lined up on the compression stroke

[@charliedebach4022]

Yeah just take out spark plug in cylinder 1. Insert long screwdriver in spark plug hole, turn crankshaft until the screwdriver is at highest point. I’m little less familiar with this part, but you’ll have to do the same thing with the valves for that cylinder. And you’ll probably have to do it for the valves on another cylinder that links up with the other camshaft. Because typically you have two cam shafts, and they have to both be adjusted, and then from there you should be able to turn on your car, and then use the timing light

[@nalley6815]

Ive watched like 4 of these videos and I still don’t get it.... sucks being dumb lol

[@goatsinker347]

This video would've been great 40 plus yrs ago.

[@youthmanrecords420]

If you can’t time your engine then you shouldn’t be adding boost or adding a new cam at all.

[@rylingrow1910]

I think my timing is too retarded lol

[@williambissell5943]

VERY GOOD VID!!! THANKS!

[@marcussatterwhite]

👍👍