How to set up and use a Yong Heng HPA/PCP air compressor for Less Lethal Home Defense refilling, lol

  Рет қаралды 1,305

D.K. Spencer

D.K. Spencer

6 ай бұрын

Less Lethal Home Defense m. groups/1315764...

Пікірлер: 30
@BrilloHead
@BrilloHead 6 ай бұрын
I had thought about getting one of these before getting a VKS but my dad conviced me otherwise. Like he strongly discouraged me from getting one of these compressors. So I went with CO2 and never gone the HPA route. Had I gone with the HPA route, I would have been running this compressor for sure.
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
They really are a good compressor. If one of mine has messed up it's been my own fault for doing something stupid. As long as you always make sure the water is running, use distilled water, And don't be an idiot like I was one time and put a little bleach in the water to prevent bacteria 🤣🤣. Yep it prevented bacteria okay but it corroded the inside where the water wouldn't flow anymore 😔
@OGKG71
@OGKG71 6 ай бұрын
Dk i want to thank you for coming hone from working all day .then making this video for me. We spoke today a d you came through . Ill be filing my own tanks tomorrow in my house. ..thanks to the man you knkws his stuff. Appreciate all the time and effort for me. God bless
@OGKG71
@OGKG71 6 ай бұрын
And yes I type with big fingers. So sometimes I f up .😂
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
All good bro. I knew it was killing you having the pump there not knowing how to use it yet.
@lisabing1965
@lisabing1965 3 ай бұрын
It makes more sence to get the cooling water from the bottom to the top I usually fill water from the bottom so that I know the cylinder is full all the way up. Secondly I would never start my compressor under pressure (With the bleeder closed tightened) make sure the bleeder is a little bit open to avoid to presurize the highpressure piston. Then connect your bottle, start your compressor, close the bleeder and let it build pressure the right way. After reached the right pressure, shut down the compressor, bleeed out the air, disconnect your bottle. Then start your compressor for some seconds with the bleeder open. That will drain out that little xtra moist that allways remain in there.
@smokingunclefrank6037
@smokingunclefrank6037 5 күн бұрын
I just purchased one today on amazon then realized I needed oil to anyway I was thinking distilled water would not be a bad Idea I remember a steam mop long ago I used regular tap bad Idea that was a lesson learned, I see some people use antifreeze I'm thinking both better safe then sorry, I still have my CS-GX3 that works great but redundancy is my moto one is non two is one or some BS like that😎
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 5 күн бұрын
@@smokingunclefrank6037 100% And it's obviously a good idea to change the water pretty often
@HIPHOPMENTOR
@HIPHOPMENTOR 6 ай бұрын
Just like dat Shun!!! 👍
@Spacecruizer203
@Spacecruizer203 6 ай бұрын
Or u could put it on your lap and get a lil rise out it lol 😜 the crobar not the compressor oooh she purrrty and the fixie blade too 🔥🔥🔥
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
Seriously bro, email me and I'll send you that crowbar for being a loyal watcher for so long and it would look sick, lol dkspencercustomkineticsa@gmail.com Just need your address again, lol.
@DawsonDave-YZF-R6
@DawsonDave-YZF-R6 6 ай бұрын
Thats a great ball catcher box was my first 🤣😂 😎
@Spacecruizer203
@Spacecruizer203 6 ай бұрын
I got the marvel air tool oil
@Spacecruizer203
@Spacecruizer203 6 ай бұрын
Dahh dat daaa daaa lol 🔥🔥🔥🔥
@Spacecruizer203
@Spacecruizer203 6 ай бұрын
Its just a Adjustability wrench man all that croissant jazz is for the Frenchies i believe lol
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
🤣🤣🤣🤣
@BrilloHead
@BrilloHead 6 ай бұрын
Hey DK, when are you going to post that unboxing video of the new LE that I sent to you? I have been wanting to see your reaction.
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
Tonight, wanted to do it justice😁😁. Really didnt have time to do this one, but had to help out a friend. We've been slammed this week, barely getting in in time to go to bed and get back up.
@Spacecruizer203
@Spacecruizer203 6 ай бұрын
Shung shwanng sum twang and Lang lol forget the box 📦 where do we get that crowbar lol hey I was gonna paint my bike purp but then I thought of do I really want to see it purple everyday so mabey I'll just redo my bars 🍸 wellp at least we can air up the tanks with pizass now ✨️
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
Bro email me so I know I've got your right address and I will send you that crow bar
@726scooty
@726scooty 6 ай бұрын
Hey DK I may need this cause I went with the hand pump I don’t shoot a lot so I haven’t had to pump from 0 but is it a pain … I also emailed you about my stock lmk your thoughts.
@BrilloHead
@BrilloHead 6 ай бұрын
Yeah, unless you have the endurance and the strength, I would avoid the hand pump. A compressor like the Yong Heng is the way to go, especially with larger air tanks.
@726scooty
@726scooty 6 ай бұрын
@@BrilloHead yea I mean it’s not too bad but I could only imagine hand pumping an empty bottle. Definitely going to invest in one. Have a good night
@GordonClark-sv6pn
@GordonClark-sv6pn 6 ай бұрын
Hello Mr. Spencer, I have a couple questions/ problems. First problem is I deleted the regulator on my Vulcan m17 and now it shoots on full auto even on single fire a fire full auto until it gets down to 2000 PSI or less. I have a new bolt spring I'm going to try alone with my factory spring and see if that helps a problem. Next problem... My FSC pepper ball marker also has the regulator blocked off and it blew the nail cig o-ring out first shot. I fixed it with a new milfig o-ring and now I have air blowing out the very center of the back of the gun where the bolt goes as soon as I burst the CO2. Please help me
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
The first problem could be the sear, but either is hard to diagnose without seeing it in person. On the FSC, change the o-ring on the outside of the heat core and that may fix it
@GordonClark-sv6pn
@GordonClark-sv6pn 6 ай бұрын
@@DKSpencerCustomKinetics I have already replaced those also before I asked. I'm going to try adding a smaller spring along with the factory spring. As far as the FSC... I took the flat head screw/cap off the regulator and removed everything and I screwed the cap back on Flush. Is that correct.? The first shot it blew the milsig o-ring out (it was broken and twisted and stretched like a water hose washer). I replaced it along with the o-rings on the outside and now it only leaks out the back.
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
@@GordonClark-sv6pn I don't typically do a rig delete on these I just change out the pressure relief valve and you do that on the side opposite the Flathead screw
@GordonClark-sv6pn
@GordonClark-sv6pn 6 ай бұрын
Do you sell the regulator. I did take all the parts out of the other end of the regulator as well. Do you sell the modifier regulator separately?
@DKSpencerCustomKinetics
@DKSpencerCustomKinetics 6 ай бұрын
@@GordonClark-sv6pn No, sorry
@angelortiz9880
@angelortiz9880 Ай бұрын
Isn't this an air compressor? Or is this a special one?
Yong Heng Set Up, Modifications, & Impressions
11:50
Mark Reed
Рет қаралды 13 М.
A clash of kindness and indifference #shorts
00:17
Fabiosa Best Lifehacks
Рет қаралды 111 МЛН
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 59 МЛН
Gym belt !! 😂😂  @kauermtt
00:10
Tibo InShape
Рет қаралды 10 МЛН
100 Years of Milwaukee Tool
1:02:41
WrenchWay
Рет қаралды 2
Yong Heng water pump upgrade comparison
5:16
Ultimate Yong Heng cooling mods
Рет қаралды 933
SCBA 4500 PSI tank after using a Yong Heng PCP compressor for 5 years
11:06
Air Velocity Sport
Рет қаралды 24 М.
My Yong Heng Compressor Died.  Can It Be Resurrected?
17:22
aaron cantrell airgun channel
Рет қаралды 2,2 М.
CREWORKS Electric PCP Air Compressor Pump
6:52
Distractor_Beam Reviews
Рет қаралды 11 М.
Locked Compressors
20:13
HVAC School
Рет қаралды 108 М.
How To FILL Your OWN Airgun Tank! Air Venturi Krypton FULL SETUP And Test
11:56
The Dollar Sportsman
Рет қаралды 1,4 М.
How to Fill a PCP Airgun Tank
6:30
Mark Reed
Рет қаралды 65 М.
Yong Heng...The Sequel....
22:34
Target Forge
Рет қаралды 15 М.