how to set up / tune fat shark fpv goggles

[@BMFPV]

Thanks for this. With so many vids about the technical crap the fact that people start out with little or no knowledge on the subject is often overlooked. Well done.

[@tshaffer90]

Thank you! You helped me alot, I am just like you were I had no clue how to do anything. You earned a new subscriber today!

[@uneekpcs]

Great video, people forget that when u know nothing u know nothing. And it takes ages to figure it out.

[@SkyHigh8800]

Thanks for making this vid! My first setup so it was very helpful.

[@koset]

It's not silly at all to make a basic video. I have over a dozen drones and this was a great reference even though I've done it before. Thanks and cheers. 👍

[@moepow8160]

Don't apologise for going over the basics, too many people assume everyone know how to do it. Thanks for taking the time for the basics, it means you think about others and not just your self. Good job

[@mrsmrriverasanchez9291]

Hey thanks for the vid worked out great!

[@melsuarez]

nicely done! there were a couple of things i needed to grasp better.

[@TD_Global]

Can you show me how to set up the camera or build one for FPV ?

[@productionHJ]

Probly a stupid question, but can you connect any analog model to any fpv goggle?

[@YonnBurgos]

Hi buddy! Thanksfor the tutorial... very helpful. I'm one of those who got one and don't know what to do with ti. If you don't mind me asking, can you power on the Goggles and use them without having the battery plugged in? Also, can you charge those Goggles if you have an power adapter?

[@MrDutchman100]

Thanks grateful for the video

[@hub7093]

great vid thank you and im just getting intothis and thank you bet you have come a long way now if your still doing this GG

[@Omnipotent2013]

Great video, but I noticed the receiver says "race" I'm just flying my Inspire One around to get better shots of stuff. Is that still good to use? Also what about the antenna? What else do I need beside the Fat Shark? Just the receiver and batter charger?

[@skyhighmovies7443]

im sorry i haven't ever used a dji product with my goggles, i use a tbs trimpth antenna, batteries that came with the googles and just a camelion charger. any standered charger or baencer will work with the batteries.

[@jakekocourek378]

Thx man, I need this, well later, bc I'm saving up to buy a drone and this😊

[@dronereviewman9580]

I love flying fpv but 4 some reason when my Beta65x is 2 houses down it starts 2 break up so bad i can't fly!!!!! Im new and have a lot 2 learn!!! I probably am doing something wrong? Great Channel! 👍😀👍

[@buzz3890]

I just bought the HD3 and man the battery is so uncomfortable on the stap next to my head. Do you get used to it?

[@maxdillion7726]

Do I have to buy the receiver separately?

[@calumwatts9175]

yes, and no most of the time yes sometimes no

[@Rampage851]

thanks for explaining how the goggles and receiver works. can you explain how the transmitter is set up? im assuming you connect fpv camera to the transmitter. and then you connect the transmitter onto the power distribution board?

[@skyhighmovies7443]

yes i believe that this is correct. i can not be sure though as my drone (TBS Vendetta) comes pre made so i have never had to do what you are explainig

[@MrJarrod]

thankyou just bought my first fatsharks V3 dominators was really helpful.

[@vukvucekovic7579]

The comment regarding the must having antenna on before powering up goggles, is simply not true. Receiver is just that, the receiver and it's not emitting anything, so w/o antenna you will get poor reception. On the other hand, VTX is powerful source of radio waves and it could burn if it doesn't release it by antenna.

[@frankvee]

What VUK said.

[@patrickcurram9763]

Better to keep doing it so you don’t create a bad habit ! Happy flying

[@g12345678ist]

Thanks for the video.

[@fiveonomo]

Very helpful, thanks.

[@graemea]

Thanks, very helpful!

[@Darksagan]

Good job thanks.

[@142jimbo]

Thanks for posting. Easy when you know how but there’s no info on simple stuff, like how to put the foam eye pads on etc!

[@ZeroFPV]

You could burn out a transmitter but not a receiver.

[@simonwallace699]

+1.

[@skyhighmovies7443]

thank you i did'nt know that

[@ZeroFPV]

sky high movies No problem. :-) if you have a diversity setup you even can search and find your aircraft by removing the antennas. joshua bardwell recently made a video how to do this.

[@skyhighmovies7443]

thanks man i will search for that video now. nice channel by the way:)

[@ZeroFPV]

sky high movies :-) thank you! merry xmas!

[@r3verseb4ckfl1p]

Thanks for sharing mate, screw the haters.

[@skyhighmovies7443]

r3verseb4ckfl1p thanks bro need any other help ?

[@r3verseb4ckfl1p]

Sky High Movies thanks for offer bud I really appreciate it man. These are my first pair of goggles like this. Do you have to change the channel manually every time you plug it in to fly?

[@skyhighmovies7443]

any time man, you shouldnt have to once you have them set on a channel every time you turn them on or off they should connect to your device, the only time this didnt happen for me is when i had a faulty vtx on my drone.

[@r3verseb4ckfl1p]

Sweet, Thanks again bud, I finally worked out how to get picture and after I turned it off and back on again it remembered the same chanel. Are you on Insta or FB?

[@skyhighmovies7443]

both mate insta - lucasperies_

[@Biodude377]

Awesome vid! FPV newbie here myself. I hear that you have to set the dip switches in the transmitter before use as they are 'off'. How did you set yours? Thanks in advance!

[@calebpudlik5734]

THANKS ALOT ☺☺☺☺

[@GuyBurdick]

Thank you!

[@dragibuks]

Thanks for tuto...

[@simonprice7557]

complete noob here, a.t.g.n.i lol. helpful vid much appreciated

[@weseng1]

Keep looking, not much here at all but at least he tried. Little information and not all is accurate.

[@veit5256]

Do you really need to put an antenna on. I don't think you demage something

[@dominickharding8278]

CHEERS M8, GREAT HELP ,THX ;0)~

[@skyhighmovies7443]

its all cool M8ty

[@johngraboski]

Hello There! I have a stock F3 Wizard (linear antenna) and Attitude v3s (circular polarized antenna) and as I cycle through the channels I get one or two that should be probably be the channel however they're horrible/unusable. I looked at the user manual which didn't appear to offer any help with this. The V3s work with my FPV Inductrix so I wanna rule them out as the prob. I'm been placating myself by flying LOS which is shit... help meh please... :( and many thanks!!

[@skyhighmovies7443]

hi have you tried looking at your vtx ?

[@johngraboski]

Sky High Movies I didn't know that it needed to be messed with. it's sealed in heatshrink! I'll get it sort it out, I hope!

[@skyhighmovies7443]

yeah i would just check to see if the pig tail is properly conected and if the problem presists maby contact the people you got the vtx from and see what they say as sometimes they can come a bit dogey and not work, i had to send one of mine back once

[@davidcanole3758]

Next time keep all the goggle in picture so we can see what buttons your using

[@petermaley9010]

thankyou

[@ThePlaneguys]

I'm sorry but you cannot burn out the receiver. Only the transmitter if y I don't have the correct load/resistance attached to it. You can power on the receiver no problem without the antenna being attached, but not the transmitter.

[@skyhighmovies7443]

thanks my friend for realising this but when i eddited the video it only showed up for computer users but not pone users

[@ThePlaneguys]

Sky High Movies Ah, sorry for the misunderstanding.

[@skyhighmovies7443]

its ok my friend nice chanel btw :)

[@currentdude4257]

More than half the time I cud not see what you're doing..... not much use for me.

[@jordanbass3210]

The receiver does not talk to the camera at all. The receiver talks to the transmitter

[@snaprollinpitts]

when you show how to do something, don't forget to actually show it. what you were doing was out of the picture, and couldn't tell anything you were doing!!! thumbs DOWN!!!

[@skyhighmovies7443]

snaprollinpitts wow you are the Alfa male, your thumbs down went through my heart like a ice bullet

[@Bamlydean]

I have crisp video until I go to plug my headphones in. Then the video has noise and the visual becomes wavy. How do I fix this?

[@skyhighmovies7443]

JimmyDean1992 I have never had this problem sorry, are your reciver and transmitters the same brand

[@Bamlydean]

Yes. When I plug the audio in for my box fpv system. which is eachine goggles two. There is no video noise. So it is deff a fatshark problem

[@dronephotographyireland]

This guy hasnt a clue what hes talking about..Burning receivers out??LOL;;;

[@skyhighmovies7443]

if your so professional why are you watching this video ?

[@dronephotographyireland]

To educate guys like you from dishing out wrong information..

[@skyhighmovies7443]

i have adjusted the video thank you, nice Chanel btw

[@newffpv465]

wireless fpv lmfao didn't know there was wired fpv. horrible video

[@skyhighmovies7443]

guess you where having a bad day, i know my erlie videos weren't the best but they are hopefully getting better.

[@KingPaul02]

thanks

[@skyhighmovies7443]

welcome :)