💬 How to set up your iC-7 Dash | TECHNICALLY SPEAKING

[@haltech]

The iC-7 is configured using a brand new, intuitive software called iCC (iC Configurator). With this software you can control various aspects of the dash behavior. In this video we guide you through the basic iC-7 setup procedure including display screen selection, gauge ranges and red zones, units, channel selection and alarms setup. Got a topic you'd like us to cover? Leave it in the comments section!

[@BoNosKG09]

is it possible to change the overall color of individual gauges? Say, instead of yellow tach, change it to purple? *Looks absolutely fantastic btw*

[@haltech]

Not yet, but that's something that may come with a future firmware update

[@BoNosKG09]

@@haltech Awesome! I can't wait to see what yall do next! Love the videos!

[@SIRICKO]

Do A video on how to set up the gear indicator.

[@STREETMACHINETV]

If only I had this video a week ago. Only kidding, the dash software is very intuitive and easy to work with. We're in love with the Haltech IC-7 Dash in our Volvo

[@haltech]

We were with you until you said "Volvo"......

[@AlexZ32]

@@haltech 😂😂😂

[@wpspeed2738]

thank you guys so much for this video! i was going crazy trying to raise my rpm's to 9500 lol arrggg the channel selection on the left! hahaha great video, much appreciated!

[@7400ralle]

does the display shows fuel level? I just got one for my s15

[@memario2004]

I know you have already mentioned coming in future releases but hoping odometer is at the top of the future released updates, sounds like it would be appreciated. Looks awesome, thanks!

[@Roastyleg]

Mario Jaeger why it didn’t come with gps speedo is absolutely ridiculous

[@injecttuning]

This is amazing

[@moisesrocherodriguez1899]

I just installed an IC7 Haltech Dash BOD2 and for some reason it just read the voltage!! Is there a set up guide for that type of install?

[@jeffsmith8449]

I'm planning on doing a body swap of a 1500 Goldwing onto a 2004 1800 Goldwing now the instrument cluster on the 1500 is old school where the speedo uses a cable on the 1800 it is electrical. Now there are dash lights that function for various things like Reverse, Side Stand, Cruise on Cruise set, FI light which also is a trouble shooting light if for any reason the engine has a fault. Now there is a ECU but no OB2 output. Are there any functions for adding more information in the instrument set up.

[@maxime_vhw]

You state the indicators stay inactive when not wired into the ic7. When using a PDM will the indicators function over can?

[@CRD90]

Thanks for the video. On the ic-7 can you also use it to switch between maps and activate launch control? I'm trying to work out if this is a viable replacement to a toucan display.

[@haltech]

For those functions you'll need either a CAN Keypad or a Rotary Trim Switch. kzbin.info/www/bejne/gmPcm6hmq6iVjaM kzbin.info/www/bejne/i2O3mIF4hr2IoLs

[@ldadol]

Loving this thing and I'm keen on buying for my RX-7. Will there be functionality for fuel level in the future?

[@haltech]

If you can run the fuel level through the ECU then you can display it on the iC-7. But not direct fuel input at this stage.

[@jasonalper7898]

I have a RacePak with a Can bus converter, with this convert the signal for Holley HP, or in the future will this work for the Holley platform,

[@stelliosskouloudis703]

i own a 2005 sti with the Center diff controller and on my cluster i have these green little boxes that displays how much power is going to the rear or front. Can the Ic-7 display that cnter diff control icons. i hope this makes sense. 🙏

[@Supra_Rankin]

Can you use the new dash with the ps2000 ECU? Will there be lap timing available in the future

[@haltech]

Yes - it's compatible with all Elite and Platinum series ECUs. Cannot confirm lap timing at this stage.

[@zoltrix7779]

I have had a play with the software, it looks quite good! Two small suggestions, on the RPM Counter, I'd like an option of compressing the first amount of the rev counter like some motorsport gauges, eg 0-3000rpm in the same space as the rest of the gauge's 1000rpm increments. Also, an option of a "flatter' colour scheme/design , rather than 3D effect. Perhaps open the whole design up to the end user with the skills to produce such a thing. Personally, on the Haltech Hero, I don't like the grey banding behind the digits and would like the choose the exact tach colour and front colours.

[@deanmc1983]

I'd like to know how to get your turn signals, high and low beam to display on the dash.... I've just purchased the ic7 and the elite 2500 plug and play ECU for 06 WRX.

[@haltech]

Our Tech Support team will be happy to help you out (: www.haltech.com/contact-us/

[@DRacer90]

I already have an Elite 1500. Do I still have to do additional programming on the settings or I can just plug and play?

[@BoostForce1]

I didn't see any comments about the speedo (sweep setting that goes up to 240kmh) if you can make it 320kmh, or better yet, for us in the USA, is there a value setting for MPH??

[@haltech]

Yes, you can change it to MPH

[@inkno701]

Can there be other colors for the gauges besides yellow? (even just white or black would nice)

[@haltech]

Upon release you will have a number of different gauges to choose from but the colours on each gauge layout is set can cannot be change. We might add custom colour options later on but on release the colours are preset.

[@tougemonster86]

What is the input for the speedometer? I've bought the dash and have a 1j with t56. Would love to have a working speedo

[@haltech]

Whatever goes into the ECU.

[@brentlewis8537]

I have same setup as you and just ran speedo input from a front ABS sensor.

[@aaronmerlow3747]

Can we get a video setting up the inputs on the back of the dash?

[@haltech]

Coming soon.

[@BahjatAlaadel]

Can I humbly request you get poor Mike a teleprompter setup with an iPad? Glidecam sells very reasonably price units. Thanks and excellent content!

[@haltech]

Not sure who Mike is but Matt indeed does have a teleprompter. He just likes to improvise every now and then:) #freestylin

[@enfielder4life]

What is needed to make this compatible with the ps1000?

[@haltech]

It's fully compatible with the Platinum Series ECUs. Plug'n'Play:)

[@danielkistler2025]

Would love to be able to have an odometer to replace the whole factory dash. Other than that, amazing product!

[@haltech]

Odometer is on our list of future updates for this product:)

[@danielkistler2025]

Haltech that would be awesome! Hoping to use it to replace the whole cluster in my r33 skyline. But being a street car still id love the odometer! Cheers

[@grippn]

@@haltech can you be sure to make it possible to start the odometer from a pre determined value, i.e. the car already has 50,000 kms so it can continue logging from this value onwards.

[@MikeRT4]

Does it have the ability to add an odometer in the display?

[@elitecol69]

no

[@haltech]

Not on release, but it's one of the features we are planning to add in the future.

[@Metalution]

Does this unit have an ability to display an odometer?

[@haltech]

Not on release but that's one of the features we are planning to add later on.

[@BoostForce1]

@@haltech , does that mean that if I buy this release edition unit, I can download the odometer when it becomes available instead of buying the unit that has odometer?

[@piecebombs5911]

Does this work with a link g4 plug in ecu?

[@haltech]

Currently, it will work with Haltech CAN only

[@piecebombs5911]

@@haltech bum....do you know if there are any others that work with the links g4?

[@haltech]

We are hoping to expand to other brand CAN systems with a future firmware update.

[@danefmiller]

@@piecebombs5911 aem cd5 cd7

[@deanbittar3036]

How do we upload a photo.

[@danefmiller]

Omg it looks so much easier to edit than aems cd5 cd7

[@jeezuz]

Cheers

[@coreyfreedom9859]

Is this a logging dash

[@haltech]

No, it is a display dash

[@coreyfreedom9859]

@@haltech will you be making one

[@haltech]

Possibly, in the future

[@brianrenlips9595]

IS THERE A LOGER DASH OPTION

[@haltech]

Not at this time

[@brianrenlips9595]

@@haltech you guys are morons

[@haltech]

Are we?

[@jubthreesixnine688]

Noice, Pity its not double din sized Not that it matters to me coz I'm broke AF...

[@Deano185]

Can’t customise via touch? Lol it’s 2019

[@GregLysien]

Ever tried touch screen with racing gloves on?

[@maximumarrigato9736]

Smart move by Haltech. Touch screen in a car fucking sux